Instruction/ maintenance manual of the product Talis S 32020XX1 Hans Grohe
Go to page of 8
Installation Instructions / W arranty T alis S 32020XX1.
2 T alis S Lavator y Mixer 32020XX1 32020XX1 T echnical Specification Flow Rate 2.2 gpm Max incoming water pressure 145 psi Recommended incoming water pressure 14.5 - 72 psi Max incoming hot water temperature 176 o F* Recommended incoming hot water temp.
3 6 66 1 2 3 Installation If the mounting surface is greater than 3/16”, leave the spacer ring intact. Place the mounting plate over the stud. T ighten the collar so that it is snug against the bottom of the mount- ing surface. Install the supply hoses to the stops with the compres- sion fittings, taking care not to twist the supply hoses.
4 User Instructions Pivot the handle up to turn the water on, down to turn it off. Pivot the handle to the right for cooler water , to the left for war mer water . Install the Pop-up Drain: Unscrew the flange from the tee. Place the tee and sealing gasket on top of the sink.
5 1 2 Reset the high temperature limit stop: T ur n the water off at the stops. Push the handle to the full up position (1). Loosen the handle screw 4 complete turns with a 4 mm allen wrench (2). Pull off the handle (3) and the nut cover . T ur n the stem so that the handle screw faces for ward.
6 Replacement Par ts 1 handle 32092000 1.1 screw cover 96338000 2 flange 96656000 3 nut 96690000 4 cartridge 92730000 5 handle screw 96059000 6 aerator 13085000 7 pop-up rod 96657000 8 mounting set 96016000 1.
7 Cleaning Recommendation for Hansgr ohe Products Modern faucetr y and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality . T o avoid damage, it is necessar y to use some caution when cleaning.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgrohe-USA.com US - Installation Instructions • Part No. 90972021 • 01/2006 THIS W ARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT P A Y FOR: A.
An important point after buying a device Hans Grohe Talis S 32020XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe Talis S 32020XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe Talis S 32020XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe Talis S 32020XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe Talis S 32020XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe Talis S 32020XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe Talis S 32020XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe Talis S 32020XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe Talis S 32020XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
