Instruction/ maintenance manual of the product Talis 06462XXX Hans Grohe
Go to page of 8
Installation Instructions / W arranty T alis 06462XXX.
2 T alis Single Control Kitchen Faucet 06462XXX Product Specifications: Hole size in mounting surface Minimum 1-1/2” Maximum mounting surface depth 2-3/8” Flow rate 2.2 GPM Maximum incoming water pressure 145 PSI Recommended incoming water pressure 22 - 72.
3 Install baseplate 06329XXX, ( optional - not included ) Position the baseplate and gasket on the faucet deck. From under the sink, install the mounting flanges and tighten the mounting collars by hand. The baseplate can be used on a kitchen sink with fewer than three holes.
4 Connect the supply hoses : use 3/8” compression fittings (not included) to connect the hot and cold supply hoses to the stops. Use two wrenches, as shown in the diagram, to prevent the hoses from twisting. Install the hose weight: proper po- sitioning of the hose weight insures that the hose will retract smoothly .
5 Replacement Parts 1 handle 32892XXX 2 nut cover 97995XXX 3 nut 97996000 4 cartridge 92730000 5 handspray 97999XXX 6 aerator 13912000 7 handspray hose 95048000 8 squeezing connection 96099000 9 mount.
6 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
7 warranty extends only (i) for 1 year , with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS W ARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT P A Y FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgr ohe-USA.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe Talis 06462XXX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe Talis 06462XXX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe Talis 06462XXX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe Talis 06462XXX you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe Talis 06462XXX will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe Talis 06462XXX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe Talis 06462XXX.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe Talis 06462XXX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe Talis 06462XXX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
