Instruction/ maintenance manual of the product Raindance Connect Showerpipe 27164001 Hans Grohe
Go to page of 12
Raindance Connect Showerpipe 27164001 Installation Instructions / W arranty.
2 Raindance Connect Showerpipe 27164001 Suggested installation.
3 T echnical Information Max. water pressure 147 psi Recommended water pressure 29 - 72 psi T est pressure 232 psi Max. flow rate showerhead 2.5 gpm handshower 2.
4 Installation Drill the screw holes with a 6 mm bit. Install the anchors. If both ends of the showerpipe are mounted on tile, install the top and bottom mounting wall flanges.
5 If the bottom of the showerpipe is mounted on tile, but the top is not, install the top wall flange with the tile matching disk. Push the shower arm and lower suppor t into the ends of the riser . Install the escutcheons. Push the showerpipe assembly over the wall flanges.
6 Install the showerhead on the shower arm. Use a level to make sure that the shower arm is straight. If it is not, loosen the mounting screws slightly with an 8 mm wrench. Reposition the arm until it is straight. T ighten the mounting screws. Attach the escutcheons to the flanges by rotating them clockwise.
7 T ighten the shower arm safety screw with a 2 mm Allen wrench. Place a hose washer in one end of the hose. Connect this end to the water supply (not included). Adjust the slider T o make the slider easier to move up and down the bar , turn the screw counter-clockwise.
8 User instructions When the water is turned on, it will come from the handshower . T o use the showerhead, push the handshower up into the handshower holder on the bottom of the showerpipe. T o remove the handshower from the showerpipe, push downwards on the holder (1), then pull the handshower down and out of the pipe(2).
9 Scale removal The showerhead and the handshower use the Quick Clean™ cleaning system. If scale deposits are noticed in the spray channels, turn the water on lightly and rub across the channels with a finger or a sponge to dislodge them.
10 Replacement Parts 1 hose 28255000 2 slider 98714000 3 riser 96770000 4 escutcheon 98672000 5 wall flange 98673000 6 shower arm 98675000 7 screen washer 94246000 8 showerhead 98855001 9 handshower 9.
11 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com the product for use primarily for any other purpose, including,.
An important point after buying a device Hans Grohe Raindance Connect Showerpipe 27164001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe Raindance Connect Showerpipe 27164001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe Raindance Connect Showerpipe 27164001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe Raindance Connect Showerpipe 27164001 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe Raindance Connect Showerpipe 27164001 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe Raindance Connect Showerpipe 27164001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe Raindance Connect Showerpipe 27164001.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe Raindance Connect Showerpipe 27164001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe Raindance Connect Showerpipe 27164001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
