Instruction/ maintenance manual of the product Metris S 31063XX1 Hans Grohe
Go to page of 12
Installation Instructions / W arranty Metris 31063XX1 Metris 31263XX1 Focus 31730001 T alis 32310XX1.
2 Metris W idespread Lavator y Faucet 31063XX1 Metris W idespread Bidet Faucet 31263XX1 T alis S W idespread Lavator y Faucet 32310XX1 Focus W idespread Lavator y Faucet 31730XX1 31063XX1 31263XX1 Product Information Requires 1/2" supply lines (not included) Max.
3 31730XX1 32310XX1 Note: T o prevent shipping damage, the spout is attached to the spout escutcheon with two adhesive strips. These strips must be removed before the spout is installed. Loosen the spout screw with a 2.5 mm Allen wrench.Pull the spout away from the escutcheon.
4 Installation Remove the valve mounting nuts from the valves. From below the mounting surface, push the valves up into the holes. Install the mounting nuts on the valves. T ighten the tensioning screws. Place the handles over the valve mounting nuts.
5 Slide the 3/8" compression nuts and ferrules over the ends of the hoses. Connect the hoses to the valve outlets. Use two wrenches so that the hoses do not twist or become loosened from the spout tee. Screw the connecting hoses into the spout tee.
6 Install the pop-up drain Remove the plunger assembly . Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. W rap the threads with two layers of T eflon tape and replace. Install the white, flexible sealing gasket on the flange.
7 User Instructions T ur n the right handle for ward (clockwise) to tur n the cold water on. T ur n the handle back (counter- clockwise) to turn the cold water off. T ur n the left handle for ward (counter-clockwise) to turn the hot water on. T urn it back (clockwise) to turn the hot water off.
8 Replacement Parts 1 handle - hot 97503XX0 handle - cold 97502XX0 2 valve set 97960001 3 hot cartridge 94009000 4 cold cartridge 94008000 5 connection hose 94071001 6 3/8" compression ftg 885130.
9 T alis Focus 7 12 2 2 12 8 9 11 5 6 3 4 5 6 3 8 11 4 16 17 18 19 9.
10 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe"). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
11 the product for use primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year , with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe Metris S 31063XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe Metris S 31063XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe Metris S 31063XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe Metris S 31063XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe Metris S 31063XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe Metris S 31063XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe Metris S 31063XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe Metris S 31063XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe Metris S 31063XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
