Instruction/ maintenance manual of the product Metris 31100XX1 Hans Grohe
Go to page of 12
Metris 31100XX1 Metris 31101XX1 Installation Instructions / W arranty.
2 Metris Electronic Lavator y Faucet with T emperature Control 31100XX1 Metris Electronic Lavator y Faucet 31101XX1 Caution : Do not bend or twist the supply hoses! T echnical Data Max. water pressure 116 psi Recommended pressure 14.5 - 72 psi Max. hot water temp.
3 Installation Flush the hot and cold supplies thoroughly before install- ing this faucet. Place the faucet in the hole on the mounting surface (1). T ighten the mounting nut (2). Install the adapters and filters on the stops (3). Install the supply lines (4).
4 T ur n the water on to the faucet (1). Peel the protective film from the sensor (2). W ait 15 seconds, the place a hand in front of the sensor (3). The water should turn on automatically . Model 31100 only : Pivot the temperature control lever for ward to make the water cooler (4).
5 Cleaning: Block the sensor for 5 seconds (1). This will turn the water off for approximately 90 seconds, so that the sink may be cleaned (2). Faucet Maintenance Replace the battery When the batter y is low , the sensor will flash. Remove the set screw from the back of the faucet (1).
6 Reset the faucet: Remove the set screw with a 2.5 mm Allen wrench. Block the sensor for 2 seconds. W ait 10 seconds (1), then replace the set screw (2).
7 Clean the filters and aerator If the flow of water is reduced, the aerator and/or the filters must be cleaned. T o clean the aerator: Block the sensor for 5 seconds to temporarily shut off the water (1). Unscrew and remove the vandal resistant aerator using the enclosed key (2).
8 Replacement Parts 1 aerator 98612000 2 solenoid valve 96904000 3 fixation set 97812000 4 connection hose 98809000 5 check valve 96456000 6 electronics 96905000 7 batter y 97399000 Important note : the check valves should be removed and inspected yearly .
9 Cleaning Recommendation for Hansgrohe Pr oducts Modern lavator y faucets, kitchen faucets, and showers consist of ver y different materials to comply with the needs of the market with regard to design and functionality . T o avoid damage and returns, it is necessar y to consider certain criteria when cleaning.
10 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
11 Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclu- sion may not apply to you. This warranty gives you specific legal rights, and you may have other rights which var y from State to State.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgr ohe-USA.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe Metris 31100XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe Metris 31100XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe Metris 31100XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe Metris 31100XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe Metris 31100XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe Metris 31100XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe Metris 31100XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe Metris 31100XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe Metris 31100XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
