Instruction/ maintenance manual of the product Installation / Warranty Starck X Hans Grohe
Go to page of 8
Installation / W arranty Starck X 10074001 03/2005 9.05739.01.
Technical Data Flow rate 2.2 gpm Maximum water pressure 145 psi Recommended water pressure: 14.5 - 75 psi Recommended hot water temp.: 120 o F - 140 o F* *Many municipalities require that the water heater be set no higher than 120 o F. Know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Prepare to install the faucet: This faucet requires 2 1/2” female threaded fittings, 3 1/8” apart (on center) for the hot and cold supplies. For proper operation of the faucet, the hot supply should be to the left, the cold to the right. These should be recessed 3/8” behind the surface of the finished wall.
• Use the guide to adjust the offset adapters. The rear of the adapter should be no more than 5 mm (3/16”) in front of the sur face of the finished wall. Make sure that the adapters are level! • Position the faucet over the offset adapters. Press firmly into place.
User Instructions: Pull the handle down to turn the water off. Push it up to turn the water on. Push the handle to the right for cooler water , to the left for warmer water . Replacement Parts 1 flange 96671000 2 handle 10092000 3 nut 96394000 4 car tridge cpl.
Cleaning Recommendation for Hansgrohe Products Modern faucetr y and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality . T o avoid damage, it is necessar y to use some caution when cleaning.
THIS W ARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT P A Y FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship.
Hansgrohe Inc. 1490 Bluegrass Lakes Parkway Alpharetta GA 30004 770 360 9880 website: www .hansgrohe-USA.com.
An important point after buying a device Hans Grohe Installation / Warranty Starck X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe Installation / Warranty Starck X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe Installation / Warranty Starck X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe Installation / Warranty Starck X you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe Installation / Warranty Starck X will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe Installation / Warranty Starck X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe Installation / Warranty Starck X.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe Installation / Warranty Starck X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe Installation / Warranty Starck X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
