Instruction/ maintenance manual of the product Citterio 39115XX1 Hans Grohe
Go to page of 12
Axor Citterio 39115XX1 Installation Instructions / W arranty.
2 Axor Citterio W all-Mount Lavator y T rim 39115XX1 T echnical Data Max. water pressure 145 psi Recommended pressure 14.5 - 72 psi Recommended hot water temp 120°F - 140°F* Flow rate 1.5 gpm The hot and cold supplies must be of equal pressure for proper operation of the faucet.
3 Installation Instructions T ur n off the water at the supply before beginning the installation. Remove the caps from the plaster shields. Cut the plaster shields 1 mm (1/16”) from the surface of the finished wall. Seal around the plaster shields with waterproof sealant.
4 Install the springs and cup washers in the valve body . Install the cartridge assembly . Install the handle. T ighten the set screw using the en- closed 2 mm allen wrench. Measure the distance from the surface of the finished wall to the end of the handle.
5 If the distance is 3 9/16” – 3 15/16”, select the two “A” sleeves (1-1/4” long). If the distance is 4” – 4 1/4”, select the two “B” sleeves (7/8” long) If the distance is 4 1/4” - 4 7/16”, select the two “C” sleeves (1/2” long) Screw the escutcheon retainers to the ends of the two sleeves.
6 Measure the distance from the outside surface of the finished wall to the spout port (“X”). Add 2” to X. Measure the spout connector . Using proper tools and safety practices, cut the spout connector so that it is X + 2” long. W rap the threads on the spout connector with several layers of a T eflon tape.
7 Use the ser vice key to tighten the escutcheon retain- ers against the plate. Lightly coat the threads on the flanges with the includ- ed lubricant. Screw the flanges onto the retainers. Push the cap over the handle assembly . Push the spout over the connector and tighten the set screw .
8 User Instructions Lift the handle to turn the faucet on. Pivot the handle to the left for warmer water , to the right for cooler water . Push the handle down to tur n the water off.
9 Replacement Parts 1 flange 96908XX0 2 handle 39092XX0 3 flange for handle 96912XX0 4 flange for spout 97695XX0 5 face plate 96914XX0 6 cartridge 96339000 7 aerator 13185XX0 8 spout 97239XX0 9 anti-t.
10 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
11 this warranty extends for as long as you own the product and the home in which the product is originally installed. If you purchased the product for use primarily for any other purpose, including, .
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgr ohe-USA.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe Citterio 39115XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe Citterio 39115XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe Citterio 39115XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe Citterio 39115XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe Citterio 39115XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe Citterio 39115XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe Citterio 39115XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe Citterio 39115XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe Citterio 39115XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
