Instruction/ maintenance manual of the product Axor Uno Wall Mounted Single Handle Lav Set 38118XX1 Hans Grohe
Go to page of 16
Installation Instructions / W arranty Uno 38117XX1 Uno 38118XX1.
2 W all Mounted Single-Handle Lav Set with Base Plate 38117XX1 W all Mounted Single-Handle Lav Set 38118XX1 38117XX1 38118XX1 T echnical Data Max. flow rate: 2 . 2 g p m Max. water pressure: 147 psi Recommended pressure: 14.7 - 72 psi T est pressure: 232 psi Max.
3 Installation with 38111181 rough manufactured before 03/2004 T urn the water off at the supply before beginning this installation. Remove the covers from the plaster shields (1). T rim the plaster shields so that they extend 1/16” out- side the surface of the finished wall (2).
4 Install the new cup washers and springs in the rough. Install the cartridge assembly . Installation with 38111181 rough manufactured after 04/2004 Remove the covers from the plaster shields. T rim the plaster shields so that they extend 1/16” outside the surface of the finished wall.
5 Install the cartridge and anti-twist device in the housing. Install the cup washers and springs in the rough. Install the cartridge assembly . Installation with all models: Push the handle over the cartridge stem. Tighten the handle screw with a 2 mm Allen wrench.
6 Model 38117XX1 only: Measure the distance between the wall surface and the end of the handle (x). If x is between 3 1/4” and 3 7/8”, select the two “A” sleeves (1 1/4”). If x is between 3 7/8” - 4 3/8”, select the two “B” sleeves (7/8”).
7 Connect the fixation nuts to the sleeves. Measure the distance from the rough to the outside surface of the finished wall (X) (1). Add 1” to X. Cut the threaded end of the spout so that it is X + 1” long (2). Push the baseplate against the wall (1).
8 Lightly lubricate the o-rings on the spout and handle escutcheons with the enclosed lubricant (1). Push the escutcheons onto the baseplate. W rap the threads on the spout with T eflon tape (1). Install the spout (2). Install the handle flange (3). T ighten the retaining nuts with the ser vice key .
9 Model 38118XX1 only: Measure the distance between the wall surface and the end of the handle (x). If x is between 3 1/4” and 3 7/8”, select the “A” sleeve (1 1/4”). If x is between 3 7/8” - 4 3/8”, select the “B” sleeve (7/8”). If x is greater than 4 3/8”, select the “C” sleeve (1/2”).
10 Push the sleeve / handle escutcheon assembly into place over the handle (1). T ighten it by rotating it clockwise (2). Push the flange over the handle. Push the sealing ring into the handle escutcheon (1). Install the handle escutcheon onto the sleeve (2).
11 Measure the distance from the rough to the outside surface of the finished wall (X) (1). Add 1” to X. Cut the threaded end of the spout so that it is X + 1” long (2). Install the spout escutcheon on the spout. Push the sealing ring into the spout escutcheon.
12 38117XX1 User Instructions Pivot the handle up to turn the water on, down to turn it off. Pivot the handle to the left for warmer water , to the right for cooler water .
13 1 flange 96908XX0 2 handle 10092XX0 3 escutcheon for handle 96912XX0 4 escutcheon for spout 96913XX0 5 baseplate 96914XX0 6 cartridge cpl. 96339000 7 aerator cpl.
14 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
15 including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year , with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products. THIS W ARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT P A Y FOR: A.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgr ohe-USA.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe Axor Uno Wall Mounted Single Handle Lav Set 38118XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe Axor Uno Wall Mounted Single Handle Lav Set 38118XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe Axor Uno Wall Mounted Single Handle Lav Set 38118XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe Axor Uno Wall Mounted Single Handle Lav Set 38118XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe Axor Uno Wall Mounted Single Handle Lav Set 38118XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe Axor Uno Wall Mounted Single Handle Lav Set 38118XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe Axor Uno Wall Mounted Single Handle Lav Set 38118XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe Axor Uno Wall Mounted Single Handle Lav Set 38118XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe Axor Uno Wall Mounted Single Handle Lav Set 38118XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
