Instruction/ maintenance manual of the product Axor Installation / Warranty Starck X Hans Grohe
Go to page of 8
Star ck X 1 00 7 4XX1 Installation Instructions / W arranty.
2 T ec hnical Inf ormation Recommended w ater pressur e 1 4.7 - 7 2.5 psi Max. water pr essure 1 45 psi Recommended hot w ater temp. 1 20° - 1 40° F* Max. hot water temp 1 65° F* Flow r ate 1 .5 gpm *Please know and follo w all applicable local plumbing codes when setting the temperature on the w ater heater.
3 Inst allation Considerations For best r esults, Hansgrohe r ecommends that t his unit be installed by a licensed, pr ofessional plumber . Please read o ver these instructions thoroughly before beginning installation. Mak e sure that you hav e all tools and supplies needed to complete the inst allation.
4 Use the guide to adjust t he oset adapters. The rear of the adapter should be no more than 5 mm (³⁄₁₆") in front of the surface of t he nished wall. Mak e sure that the adapters are lev el! P osition the faucet over the oset adapters.
5 User Instructions Pull the handle down to turn the water o. Push it up to turn the water on. Push the handle to the r ight for cooler water , to the lef t for warmer w ater .
6 Limited Life time Consumer W arrant y This product has been manufactur ed and tested to t he highest qualit y standards by Hansgr ohe, Inc. (“Hansgrohe”). This w arrant y is limited to Hansgrohe pr oducts which are purchased b y a consumer in the United St ates af ter March 1 , 1 996, and installed in either the United S tates or Canada.
7 pose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year , with respect to Hansgrohe and Commercial products, and (ii) for 5 y ears, with respect to AXOR pr oducts. THIS W ARRANT Y DOES NO T CO VER, AND HANSGROHE WILL NO T P A Y FOR: A .
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgr ohe-usa.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe Axor Installation / Warranty Starck X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe Axor Installation / Warranty Starck X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe Axor Installation / Warranty Starck X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe Axor Installation / Warranty Starck X you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe Axor Installation / Warranty Starck X will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe Axor Installation / Warranty Starck X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe Axor Installation / Warranty Starck X.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe Axor Installation / Warranty Starck X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe Axor Installation / Warranty Starck X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
