Instruction/ maintenance manual of the product Axor 17010XX1 Hans Grohe
Go to page of 8
Axor Carlton 17010XX1 Installation Instructions / W arranty.
2 T echnical Specification Hole size in mounting surface Minimum 1-3/8” Maximum 1-5/8” Maximum mounting surface depth 1-1/4” Flow rate 2.2 GPM Maximum operating pressure 145 PSI Recommended operating pressure 22 - 72.
3 Install the faucet Place the faucet and sealing ring on top of the mounting surface. Install the mounting flange over the stud. Thread the collar onto the stud until the mounting flange is firmly against the bottom of the mounting sur face.
4 Install the pop-up drain Remove the plunger assembly . Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. W rap the threads with two layers of T eflon tape and replace. Install the white, flexible sealing gasket to the flange.
5 Re-set the High T emperature Limit Stop (optional) Close the drain OR cover it with a wash cloth. Use a 4 mm Allen wrench to push the screw cover into the handle. Retrieve the screw cover when the handle is removed. Use the 4mm Allen wrench to loosen the handle screw 4 complete revolutions.
6 User Instructions • Push the handle up to turn the water on. • Pivot the handle to the left for hotter water , to the right for cooler water . • Push the handle down to turn the water off.
7 Cleaning Recommendation for Hansgrohe Pr oducts Modern sanitar y faucetr y and shower fixtures consist of ver y different materials to comply with the needs of the market with regard to design and functionality .
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770 360-9880 • Fax 770 360 9887 www .hansgrohe-USA.com limitation, a commercial purpose, this warranty extends only (i) for 1 year , with respect to Interaktiv and Retroaktiv products, and (ii) for 5 years, with respect to AXOR, ShowerPower and Pharo products.
An important point after buying a device Hans Grohe Axor 17010XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe Axor 17010XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe Axor 17010XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe Axor 17010XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe Axor 17010XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe Axor 17010XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe Axor 17010XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe Axor 17010XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe Axor 17010XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
