Instruction/ maintenance manual of the product 34010XX1 Hans Grohe
Go to page of 12
Installation Instructions / W arranty Axor Citterio M 34010XX1 34016XX1 34017XX1 Axor Citterio M 34120XX1 34127XX1 Axor Citterio M 34210XX1.
2 34010XX1 34017XX1 34016XX1 34210XX1 Axor Citterio M Lav Mixer 34010XX1 Small Lav Mixer 34016XX1 Lav Mixer less Drain 34017XX1 T all Lav Mixer 34120XX1 T all Lav Mixer less Drain 34127XX1 Bidet Mixer.
3 Installation Considerations For best results, Hansgrohe recom- mends that this unit be installed by a licensed, professional plumber . Please read over these instructions thoroughly before beginning instal- lation. Make sure that you have all tools and supplies needed to complete the installation.
4 Installation Install the drain pull rod*. Position the faucet and sealing gasket on the mounting surface. Install the fiber washer , friction washer , and mounting nut. T ighten the mounting nut by hand. T ighten the tensioning screws. *Drain and pull rod not included with models 34017XX1 or 34027XX1.
5 Connect the hot and cold supply hoses to the stops with 3/8" compression fittings (not included). Use two wrenches, as shown, to prevent the hoses from twisting.
6 Replace the flange. Replace the handle. T ighten the handle screw . Replace the screw cover . Note : the temperatures given in the diagram assume a water heater temperature of 140 ° F , a cold water temperature of 50 ° F and a water pressure of 45 PSI.
7 Install the pop-up drain* Remove the plunger assembly . Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. W rap the threads with two layers of T eflon tape and replace. Install the white, flexible sealing gasket to the flange.
8 User Instructions T urn the water on by pushing the handle up. T urn it off by pushing the handle down. Pivot the handle to the left to make the water warmer , to the right to make it cooler . If the flow of water diminishes, use the ser vice key (included) to remove the aerator .
9 Problem Possible Cause Solution Insufficient water - Aerator clogged - Clean aerator , replace if neces- sar y Mixer stiff - Cartridge defective - Replace cartridge Mixer dripping - Cartridge defect.
10 1 handle 34093XX0 1.1 screw cover 96762000 2 flange 98863XX0 3 nut 98864000 4 cartridge 97685000 5 seal 98865000 6 adapter for cartridge 98866000 7 aerator 98926000 8 pull rod 96657XX0 9 supply hos.
11 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe 34010XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe 34010XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe 34010XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe 34010XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe 34010XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe 34010XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe 34010XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe 34010XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe 34010XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
