Instruction/ maintenance manual of the product 31711001 Hans Grohe
Go to page of 8
Focus 31701001 31711001 Focus 31721001 Installation Instructions / W arranty.
2 Focus Lavator y Faucet 31701001 Focus Bidet Faucet 31721001 31701001 31721001 T echnical Specification Recommended water pressure 22 - 72 PSI Recommended hot water temp. 120° - 140°F* Hole size in mounting surface 1 3/8” Maximum mounting surface thickness 1 5/8” Flow rate 2.
3 Installation Place the faucet and the sealing ring on the countertop. From below , install the mounting washer on the mounting bolt. Install and tighten the mounting collar . Attach the hoses to the supply stops with 3/8” compres- sion fittings (not included).
4 Install the Pop-up Drain* Remove the plunger assembly . Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. W rap the threads with plumbers’ thread tape and replace. Install the white, flexible sealing gasket to the flange.
5 Re-set the High T emperature Limit Stop (optional) Close the drain OR cover it with a wash cloth. Use the included 4 mm Allen wrench to push the screw cover into the handle. Retrieve the screw cover when the handle is removed. Use the 4mm Allen wrench to loosen the handle screw 4 complete revolutions.
6 Replacement Parts 1 handle 31793000 1.1 screw cover 96338000 2 flange 97406000 3 nut 97209000 4 cartridge 92730000 5 seal 95008000 6 aerator 13085000 7 fixing set 96016000 8 connection hose 96321001.
7 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
US - Installation Instructions • Part No. 90560222 • Revised 11/2007 and (ii) for 5 years, with respect to AXOR products. THIS W ARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT P A Y FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship.
An important point after buying a device Hans Grohe 31711001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe 31711001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe 31711001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe 31711001 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe 31711001 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe 31711001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe 31711001.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe 31711001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe 31711001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
