Instruction/ maintenance manual of the product 28502XX1 Hans Grohe
Go to page of 8
Raindance E 100 AIR 3-Jet 28502XX1 Raindance S 100 AIR 3-Jet 28504XX1 Installation Instructions / W arranty.
2 Raindance E 100 Air 3-jet Handshower 28502XX1 Rain AIR Balance AIR Whirl AIR Raindance S 100 Air 3-jet Handshower 28504XX1 Rain AIR Balance AIR Whirl AIR Maximum Flow Rate 2.
3 Installation Place the screen washer in the end of the handshower hose. Screw the hose to the handshower . If the flow of water becomes noticeably less, remove and clean the screen washer . Scale Removal The Raindance Air 3-jet handshower incorporates the Quick Clean™ cleaning system.
4 If scale deposits are noticed on the spray face, pour about 3/4” of a commercial scale remover , such as Lime-A way™ or CLR™ ,into a shallow dish. Dilute the remover according to the label instructions. Soak only the spray face in the solution for the amount of time specified on the label.
5 User Instructions T o change spray modes, push the selector lever until the desired spray is achieved. Rain AIR Balance AIR Whirl AIR Replacement Parts 94246000 94246000 selector lever.
6 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
7 the product for use primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year , with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe 28502XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe 28502XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe 28502XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe 28502XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe 28502XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe 28502XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe 28502XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe 28502XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe 28502XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
