Instruction/ maintenance manual of the product 2810BXX1 Hans Grohe
Go to page of 16
Raindance Allrounder 28110XX1 W all Outlet Adapter with Hose Connection 28108XX1 Installation Instructions / W arranty.
2 Raindance Allrounder 28110XX1 T echnical Data Max. flow rate of showerhead 2.5 gpm Determining the mounting height (X) The Allrounder should be mounted according to the preferences of the users.
3 Install the Allrounder with the Optional W all Outlet Adapter with Hose Connection 28108XX1 Roughing in If you are not using the 28108XX1 wall outlet adapter , go to page 9 . Install a properly anchored 1/2" NPT drop-eared ell, at least 2" behind the surface of the finished wall.
4 Installation W rap both ends of the brass nipple with T eflon tape. Screw it into the mounting piece. Screw the test nipple / mounting piece assembly into the drop-eared ell. T ighten with a 12 mm Allen wrench (not included). Position the mounting plate over the mounting piece.
5 Drill the holes with a 6 mm bit. Use extreme caution - do not drill into the water line. Install the anchors. Remove the long bottom mounting screw on the All- rounder . Replace with the shor ter screw included with the adapter . Seal the wall around the anchors with waterproof sealant.
6 Slide the handshower into the handshower holder . Guide the hose over the hose hook. Install the handshower Place a black rubber washer in one end of the hose. Screw this end to the wall outlet adapter . Place the screen washer in the other end of the hose.
7 Replacement Parts 28108001 1 check valve 94074000 2 screw 97598000 Check V alve Maintenance: Backflow preven- tion is provided by a check valve, which is integral to the wall outlet adapter .
8 Corner Mount Kit 28105XX0 Note: The corner mount kit is not for use with the 28108XX1 wall outlet adapter . Position the corner mount against the wall at the desired location. Mark the positions of the screw holes. Put the mount aside. Drill the holes using a 6 mm bit.
9 Install the 28110XX1 Allrounder Do not drill through the mounting plate. Put the mounting plate away in a safe location. Drill the holes, using a 6 mm bit. Place the mounting plate against the wall at the de- sired location. Mark the locations of the screw holes.
10 Place the Allrounder over the mounting bracket (1). T ighten the set screw (2). Install the handshower: Place a black rubber washer in one end of the hose. Connect this end of the hose to the wall outlet (not included). Place the screen washer in the other end of the hose.
11 Slide the handshower into the holder , until the holder grips it firmly . Guide the hose over the hose hook. Using the Allrounder T o adjust the handshower height: Pull or push the Allrounder to the desired position. T urn the knob to the front to make the Allrounder easier to move.
12 Change the spray modes Push the function lever until it is next to the name of the desired function. The Raindance has 3 spray modes. Limescale Removal The spray channels on the Raindance are protected by the Rubit!™ self-cleaning system.
13 Replacement parts 28110XX1 1 handshower 28518XX1 2 T echniflex hose 28276XX3 3 mounting plate 97609XX0 4 corner mount kit 28105000 (optional - not for use with wall outlet adapter) XX = color 00 = .
14 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
15 the product for use primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year , with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe 2810BXX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe 2810BXX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe 2810BXX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe 2810BXX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe 2810BXX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe 2810BXX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe 2810BXX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe 2810BXX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe 2810BXX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
