Instruction/ maintenance manual of the product 14801XX1 Hans Grohe
Go to page of 16
Bar Faucets Installation Instructions / W arranty Allegro E 14801XX1 HighArc.
2 English T echnical Specification Recommended water pressure 14.7 - 72.5 PSI Recommended hot water temp. 120° - 140° F* Hole size in mounting surface 1-1/2” Max. mounting surface thickness 2 3/8” Max. flow rate 2.2 GPM *Please know and follow all applicable local codes when setting the temperature on the water heater .
3 Installation Push the spout into place on the faucet. T ighten the spout set screw . Install the hot and cold supply lines to the stops with 3/8” compression fittings (included). Use two wrenches, as shown, to prevent the supply hoses from twisting.
4 Install the handle Install the handle screw on the cartridge stem. T ighten only 4 turns. Place the handle over the stem and handle screw . Press it firmly into place. Use a 4 mm Allen wrench to finish tightening the screw . Install the screw cover .
5 Allegro E Bar Faucet 14801XX1 T echnical Specification Recommended water pressure 14.7 - 72.5 PSI Recommended hot water temp. 120° - 140° F* Hole size in mounting surface 1-1/2” Max. mounting surface thickness 2 3/8” Max. flow rate 2.2 GPM *Please know and follow all applicable local codes when setting the temperature on the water heater .
6 Install the hot and cold supply hoses on the stops with 3/8” compression fittings (included). Use two wrenches, as shown, to prevent the hoses from twist- ing and becoming loosened from the faucet. Do no t a l lo w e i th e r h os e t o t w is t .
7 Données techniques Pression d’eau recommandée 14,7 - 72,5 psi T empérature recommandée pour l’eau chaude 120° – 140°F* Dimension du trou dans la surface de montage 1-1/2 po Profondeur maximale de la surface de montage 2 3/8 po Débit 2,2 gpm max.
8 Installation du robinet Enclenchez le bec en col de cygne sur le corps du robinet. Serrez la vis. Placez l’anneau d’étanchéité et le robinet sur la surface de montage. Installez la rondelle de plastique, la rondelle en fibre, la rondelle de friction et l’écrou de montage.
9 Installation de la poignée Installez la vis de la poignée sur la tige. Serrez 4 tours complets. Placez la poignée sur la tige et vissez la poignée. Appuyez bien fermement sur la poignée pour la fixer en place. Utilisez une clé hexagonale de 4 mm pour finir de serrer la vis.
10 Données techniques Pression d’eau recommandée 14,7 - 72,5 psi T empérature recommandée pour l’eau chaude 120° – 140°F* Dimension du trou dans la surface de montage 1-1/2 po Profondeur maximale de la surface de montage 2 3/8 po Débit 2,2 gpm max.
11 Installation du robinet 14801XX1 Placez l’anneau d’étanchéité et le robinet sur la surface de montage. Installez la rondelle en fibre, la rondelle de friction et l’écrou de montage.
12 Replacement Parts 1 flange 96468XX0 2 nut 96461000 3 cartridge 92730000 4 aerator 13085XX0 5 connection hose 96316001 6 fixing set 95049000 7 sealing set 92646000 8 plastic washer 97523000 9 axial .
13 Cleaning Recommendation for Hansgrohe Pr oducts Modern lavator y faucets, kitchen faucets, and showers consist of ver y different materials to comply with the needs of the market with regard to design and functionality . T o avoid damage and returns, it is necessar y to consider certain criteria when cleaning.
14 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
15 C. Labor or other expenses for the disconnection, deinstallation, or return of the product for warranty service, or for installation or reinstallation of the product (including but not limited to proper packaging and shipping costs), or for installation or reinstallation of the product.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe 14801XX1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe 14801XX1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe 14801XX1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe 14801XX1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe 14801XX1 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe 14801XX1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe 14801XX1.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe 14801XX1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe 14801XX1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
