Instruction/ maintenance manual of the product 06631XX0 Hans Grohe
Go to page of 16
Solaris E 06631XX0 Stratos E 06575XX0 Metro E 06571XX0 Installation Instructions / W arranty.
2 Installation Considerations For best results, Hansgrohe recommends that this unit be installed by a licensed, profes- sional plumber . Please read over these instructions thoroughly before beginning installation. Make sure that you have all tools and supplies needed to complete the installation.
3 Installation Place the faucet and sealing gasket on the mount- ing surface. Slide the washer over the bolt. Install the collar . T ighten the collar with a flat head screwdriver . Secure the supply hoses to the stops with 3/8” compression fittings (not included).
4 Install the handle screw on the cartridge stem. Use a 4 mm Allen wrench to tighten it 4 complete turns. Push the handle into place over the screw and the stem. Use a 4 mm Allen wrench to finish tightening the screw . Install the screw cover . Install the pull rod.
5 Install the pop-up drain Remove the plunger assembly . Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. W rap the threads with T eflon tape and replace. Install the flexible sealing gasket on the flange. Sit it in the sink outlet.
6 Reset the High T emperature Limit Stop (optional) Use a 4 mm Allen wrench to push the screw cover into the handle Use the 4mm Allen wrench to loosen the handle screw 4 complete revolutions. Remove the handle. Remove the nut cover . Remove the handle screw from the stem of the cartridge.
7 Mitigeurs de lavabo Solaris E 06631XX0 Stratos E 06575XX0 Metro E 06571XX0 Solaris E 06631XX0 Stratos E 06575XX0 Metro E 06571XX0 Données techniques Pression d’eau recommandée 22 -72 psi T empé.
8 Installation Placez le robinet et le joint d’étanchéité sur la surface de montage. Installez la rondelle et le collier de montage. Serrez le collier de montage. Installez les tuyaux d’arrivée flexibles sur les bu- tées d’arrêt avec des raccords à compression de 3/8 po (non compris).
9 Installation de la poignée Installez la vis de la poignée sur la tige de la cartouche. Serrez 4 tours complets. Poussez la poignée en place sur la vis et la tige. Serrez la vis à l’aide d’une clé hexagonale de 4 mm. Installez le cache-vis. Installez le tirette.
10 Installation de l’obturateur à clapet Retirez le plongeur . Dévissez la collerette du raccord en T . Dévissez la queue du raccord en T . Enrobez les filets de ruban de plom- berie Téflon et remettez en place. Installez le joint d’étanchéité sur la col- lerette.
11 Réglage de la butée limite d’eau chaude (en option) Poussez le cache-vis dans la poignée à l’aide d’une clé hexagonale de 4 mm. Desserrez la vis de la poignée (4 tours complets). Enlevez la poignée et retirez le cache-vis. Enlevez le cache-écrou.
12 Replacement Parts 1 nut cover 94192XX0 2 nut 94194000 3 cartridge 92730000 4 fixing set 96016000 5 aerator 13085XX0 6 pull rod and knob 88541XX0 7 handle - Solaris 06840XX0 handle - Stratos 06842XX.
13 Cleaning Recommendation for Hansgrohe Pr oducts Modern lavator y faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality . T o avoid damage and returns, it is necessar y to consider certain criteria when cleaning.
14 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
15 D. Accessories, connected materials and products, or related products not manufactured by Hansgrohe. TO OBT AIN W ARRANTY P ARTS OR INFORMA TION Contact your Hansgrohe retailer , or contact T echnical Ser vice at: Hansgrohe Inc. 1492 Bluegrass Lakes Parkway Alpharetta GA 30004 T oll-free (800) 334-0455.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
An important point after buying a device Hans Grohe 06631XX0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hans Grohe 06631XX0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hans Grohe 06631XX0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hans Grohe 06631XX0 you will learn all the available features of the product, as well as information on its operation. The information that you get Hans Grohe 06631XX0 will certainly help you make a decision on the purchase.
If you already are a holder of Hans Grohe 06631XX0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hans Grohe 06631XX0.
However, one of the most important roles played by the user manual is to help in solving problems with Hans Grohe 06631XX0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hans Grohe 06631XX0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
