Instruction/ maintenance manual of the product T124 HANNspree
Go to page of 57
G G G K K K G G G L L L M M M T T T ED ED ED Unit 2 /F No Hung T o R oad Kwun T ong Kowloon Hong Kong 234 3822 234 3790 6 9.6"/12.1" Liquid Cr ystal Display T ele vision .
Table of Contents 1 1. Regulatory Information .............................................. ..... 3 2. Description of Warning Symbols ..................................... 5 3. Safety Not ices .........................................................
Table of Contents 2 Audio Setting ........................................................... 3 6 Equalizer ............................................................ 3 7 Balance ........................................................... ... 3 8 Surround .
3 1 R e gulator y Infor ma tion FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditi ons: (1) This device may not cause harmful interference, and ( 2) this de vice must a ccept any interfe rence received, including inter ference that may cause undesired operation .
4 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for rad io noise emissions from digital a pparatus as set out in the Radio Inte rference Regulations of the Canadian Dep artment of Communication s.This device complies with Canada ICES-003 Class B.
5 2 Description of War ning Symbols Before Y ou Proceed 1. Read all Safety Notices in Section 3 of this manual and instructions in the User ’s Manual carefully before either plugging in or turning the TV on. 2. Keep this User ’s Manual in a safe place for future reference.
6 3 Saf ety Notices Electric Power Notice Electric power may cause personal injury and mechanical damage if misused. Although safety has been tak en into co nsideration during the design and production of this TV , electr ic shock or fire can result if the TV is misused.
7 Inst allation Safety Notes Antenna We suggest tha t you use an outdoo r antenna to get the best signal possible unless you have ca ble TV or a centralized indoor an te nna system. Y ou may , however , use an ant enna indoors if it is placed in a location free fr om interference.
8 IMPORT ANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water . 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Inst all in accordance with manufacturer’s instructio ns.
9 1 1 Only use attachment s/accessories specified by the manufacturer . 12 Use only with the cart, st and, tripod, bracket, or table specified by the manufacturer , or sold with the app aratus. When a cart is used, use caution when mo ving the cart/app aratus combination to avoid injury from tip-over .
10 Personal Safety T o avoid overloading t he power supply , never plug too many electrical devices into an outlet, power strip, or extension cable. Dangerous high-volt age electric power component s are located inside the TV . T o avoid electric shock, do not di sasse mble the TV in any way .
11 Installation Do not place the TV in locations where there is excessive steam or dust. Avoid blocking the TV's vent s, do not place the TV on a bed, sofa, carpet, or in a sealed cabine t. Install the out door antenna (not included) away from power transmission lines to avoid possible danger .
12 Operation Maintenanc e This TV is designed for hom e power sources as labeled on the casing. A void using any other power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Do not alte r the plug.
13 4 Preface Thank you for purchasing a Hannspre e Liquid Cryst al Display T elevision (LCD TV). Y our new TV will allow y ou to enjoy superio r audio and video while enriching your lifestyle with advanced technology . Please carefully read this manual in its entirety befo re setting up, using or operating your TV .
14 Copyright © Copyright 2005 Hannspree, Inc. All rights reserved. This manu al is protected by copyright and distributed under lic enses restricting its use , copying and distribution. No part of this manual may be reproduced in any form by any means without the prior writt en authorization of Hannspree .
15 5 Introducing the TV Thank you for purchasing this LCD TV. Y our LCD TV is designed to be safe, versatile, and easy to use. The design makes it a fun addition to any room.
16 6 Checking P ac kage Contents Make sure the followin g components are included in the box. Please cont act Hannspree Custom er Service immedi ately if anything is missing or damaged.
17 7 Getting Star ted Control Panel Description Icon Function Power T urns the TV on an d off. Power LED Indicates power status. Source SOURCE Selects the input source to be displayed: (TV , A V1, A V2 or A V2s) / ( T V, AV o r AV s ) Note: If S-Video is con nected, the TV autodetect s it and A V and A V2 display as A Vs and A V2s.
18 Input and Output Jac ks Description Connector Function 4-IN-1 (A V / A V 2) Use the included 4-IN-1 A/ V cable to connect external devices, such as a VCR, VCD, DVD player , CVBS RCA cables or a game device. Audio Input: A V connector audio (white and red) cables.
19 R emote Control Description Icon Function Menu Press this button to activ ate the OSD menu system and to adjust va rious settings and personal preferences. Arrow / / / / < / > Press / / and to scroll through the on-scre en display menus.
20 Select channel Changes channels. Press channel up to increase the channel n umber . Press channel down to decrease the channel number . In A V mode, press either button to return to TV mode. Source Press this button to cycle the video input sources.
21 Inser ting the Remote Control Batter y /Batteries 1 Open the battery comp artment cover at th e back of the remo te control (A). 2 For AAA batteries: Insert the batteries pa ying attention to the polarity markings inside th e battery comp artment (B).
22 CAUTION • If the remote control is not used fo r a long period, remove the batteries and store them separately . • Handle damaged or leaking batteries carefully , and wash hands after such handli ng . • If your remote control ha s two b atteries, do not mix new and old batteries because the life of the ne w batteries will be shortened .
23 8 Making Connections Connecting to an Antenna or Cable TV 1 Connect one end of the VHF/UHF (Antenna) or CA TV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV . 2 Connect the other en d of the VHF/ UHF (Ante nna) or CA TV cable to the antenna socket or CA TV cable.
24 Connecting to A V Devices Connect external devices such as a VC R, VCD, DVD player , or video game console to the TV using the supplied 4-IN- 1 A/V cable. Connecting to a V CR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR, VCD or DVD player .
25 Connecting to a Video Camera The instructions presented he re are a gene ral guide to connecting the TV to a camcorder or other type of digit al camera. Actual conne ctions may vary according to the mak e an d m od el of the devic e. Refer to the user ’s manual included with the camcorder or camera for more detailed instructions.
26 Connecting to a Video Game Consol e The instructions presented he re are a gene ral guide to connecting the TV to a game console using the RCA Jacks (some ga me devices may require a unique adapter that is not provided ). Actual connections may vary according to the make and model of the game de vice.
27 Connecting Exter nal Speak er s or Headphones External speakers or head phones may be used to listen to the TV rather than using the built-i n speakers. Conne ct external speakers with built-in amplifier to the speaker line out port or headpho nes to the head phone port as illustrated.
28 Connecting the P o we r Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector in to the DC-IN input jack on the rear panel of the TV . 3 Insert the three-pronged plug at the other end of the power cord into a powe r outlet.
29 9 Using the TV Using the Remote Co ntrol For best results, use the remote control within a dist ance of 16 feet (5 meters) from the front of the TV . Do not exceed an angle of 30 degrees when pointin g at the TV . Notes • The operational distance may be shortened wh en the signal sensor is directly expose d to strong light.
30 10 Adjusting On-Scr een Display (OSD) Settings The On-Screen Display (OSD) me nu system provides a quick and simple method to adjust your TV’s settings.
31 OSD Function Menu The following illustration helps yo u become acquainted with OSD menu items. The following menus can be set using dif ferent a djustment methods, which are described in the instructions.
32 Picture Setting Press m e nu to enter the OSD menus. 1 Press CH UP or CH DOWN to select Picture Setting. 2 Press VOL UP to enter the Picture Setting menu.
33 Vide o Mode 1 Press VOL UP or VOL DOWN to switch between V ideo Mod e options: User: Enables you to set user defined values. Dynamic: Set s the display for enhanced picture con trast and sharpness (default) . St andard: Set s the display for normal viewing (default) .
34 Color T emperature Noise Reduction Noise reduction enables you to reduce the amount of interference in the signal. 1 Press CH UP or CH DOWN to select Color T emp. 2 Press VOL UP or VOL DOWN to switch between Color T emp options: The following three color temperatures are available.
35 Preset Preset erases all customized pictur e settings and returns all values to factory defaults. 1 Press CH UP or CH DOWN to select Preset. 2 Press VOL UP to re set all picture settings to fac tory defaults. “OK” appears on the scree n. 3 Press menu to confirm the setting.
36 Audio Setting Press m e nu to enter the OSD menus. 1 Press CH UP or CH DOWN to select Audio Setting. 2 Press VOL UP to enter the Audio Sett ing menu.
37 Equalizer 1 Press VOL UP or VOL DOWN to switch between Equaliz er options: User: Enables you to set user defined values. Movie: Sets the audio to accommodate movies (default) . Music: Sets the audio to accommodate music (defau lt). Hall: Set s the audio to accommodate a hall environment (default) .
38 Balance Surround 1 Press CH UP or CH DOWN to select Balance. 2 Press VOL UP or VOL DOWN to adjust the balance between lef t and right audio channels. 3 Press menu to confirm the setting. Note The new setting is confir med automatically when the OSD times out.
39 Preset Select this item to erase a ll cust omized audio settings and return all values to factory default s. 1 Press CH UP or CH DOWN to select Preset. 2 Press VOL UP to reset a ll audio settings to fac tory defaults. “OK” appears on the scree n.
40 TV Setting Press m e nu to enter the OSD menus. 1 Press CH UP or CH DOWN to select TV Setting. 2 Press VOL UP to enter the TV Setting menu. TV System B/G CH Skip Auto Program Fine Tune Fav.
41 System Use the System function to determine the P AL signal type The signal type will be detected automatically: B/G , D/K, or I. TV System B/G CH Skip Auto Program Fine Tune Fav.
42 Channel Skip 1 Press CH UP or CH DOWN to select CH Skip. 2 Press VOL UP to enter the CH Skip submenu. 3 Press CH UP or CH DOWN to select Channel. 4 Press VOL UP or VOL DOWN to select the channel you want to modify . 5 Press CH UP or CH DOWN to select Skip.
43 Auto Program 1 Press CH UP or CH DOWN to select Auto Program. 2 Press VOL UP to begin auto programming. 3 The TV will search for all available channels and add them to the channel list. 4 Press menu to confirm the setting. Note The new setting is confir med automatically when the OSD times out.
44 Fine T une 1 Press CH UP or CH DOWN to select Fine T une. 2 Press VOL UP to enter the Fine T une submenu. 3 Press CH UP or CH DOWN to select Channel. 4 Press VOL UP or VOL DOWN to select the channel you want to modify . 5 Press CH UP or CH DOWN to select Frequency .
45 Favorite Ch annel 1 Press CH UP or CH DOWN to select Fav . CH. 2 Press VOL UP to enter the Fav . CH Setting submenu. 3 Press CH UP or CH DOWN to select the Favorite channel you want to modify (1 ~ 4). 4 Press VOL UP or VOL DOWN to select the channel you want to set as the favorite channel for that number .
46 Customize Setting Press m e nu to enter the OSD menus. 1 Press CH UP or CH DOWN to select Customize. 2 Press VOL UP to en ter the Customize Setting menu.
47 Sleep Timer OSD Timeout 1 Press CH UP or CH DOWN to select Sleep T i mer . 2 Press VOL UP or VOL DOWN to select a sleep timer value: Off 30/60/90/120 minutes The TV will turn off after the specified number of minutes. 3 Press menu to confirm the setting.
48 Language 1 Press CH UP or CH DOWN to select Language. 2 Press VOL UP or VOL DOWN to select an OSD language: English 3 Press menu to confirm the setting.
49 11 T aking Car e of Y our TV & R emote Control Note Protect the remote control from shock or vibration to avoid damage. Do not place th e remote control in hot or humid locations. T urn the power of f before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprint s from the screen.
50 12 T r oubleshooting Situation Solution No picture and sound. • Connect the power cord properly . • Check if the p ower LED is on or not. • Press power on the control panel or remote control. • Press source to cycle thr ough connected video sources.
51 Screen image turns over . • Make sure the video signal cable is connected properly . Snow appears on the screen. • Adjust the location of the antenna, placing it far from roads or sources o f interference. • Check the antenna and the video signal line connections.
52 13 War r anty and Ser vice For comple te warranty service infor mation, plea se refer to t he “Warranty and Service Manual” enclosed with your TV .
53 14 Specifica tions 9.6 / 12.1–inch LCD TV LCD Panel Size 9. 6 / 12.1–inc h TFT Aspect Ratio 4:3 Display Re solution 9.6-inch: 800 (horizontal) x 600 (vertical) 12.
54 15 Glossar y Aspect Ratio: The ratio of width to he ight of a film, image or display screen. Color T empera tu re: Adjusting the color temperature enables you to set the intensity of white light. Color t emperature is measured in Kelvin (K). Higher color tempera tures result in a blue tint.
MEMO.
MEMO.
An important point after buying a device HANNspree T124 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HANNspree T124 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HANNspree T124 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HANNspree T124 you will learn all the available features of the product, as well as information on its operation. The information that you get HANNspree T124 will certainly help you make a decision on the purchase.
If you already are a holder of HANNspree T124, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HANNspree T124.
However, one of the most important roles played by the user manual is to help in solving problems with HANNspree T124. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HANNspree T124 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
