Instruction/ maintenance manual of the product HF289 HANNspree
Go to page of 24
OSD[V4.395] HF289 LCD Monitor.
2 Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interfer ence S tatement This equipment has been tested and found to comp ly with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
3 RECYCLING INFORMATION We, the Hannspree care very much about our envir onment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
4 T ABLE OF CONTENTS SAFETY NOTICE ...................................................................................................... 5 PRECAUTIONS ...................................................................................................
5 SAFETY NOTICE 1. The changes or modifications not expressly approved by the pa rty responsible for compliance could void the user's authority to operate the equipm ent. 2. Shielded interface cables and AC pow er cord, if any , must be used in order to comply with the emission limits.
6 SPECIAL NOTES ON LCD MONIT ORS The following symptoms are norm al with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the s creen may flicker during initial use. T urn of f the Power Switch and then turn it on again to make sure the flicker disappears.
7 PREF ACE Thank you for purchasing a Hannspree Liquid Cr ystal Display Monitor (LCD Monitor). Please carefully read this manual in its entirety befo re setting up, using or operating your Monitor .
8 BEFORE OPERA TING THE MONIT OR FEA TURES • 28” W ide screen TFT Color LCD Monitor • Crisp, Clear Display for W indows • Recommended Resolutions : 1920 X 1200@60Hz • Ergonom ic Design • S.
9 INST ALLA TION INSTRUCTIONS INST ALL REMOVE Figure.1. Installing and Removing the Base INSTALLATION: 1. Turn the monitor over and set it upside down. 2. Align the monitor to the slots on the stand. 3. Please note that the longer edge of the stand should be facing forward.
10 MAKING CONNECTIONS CONNECTING TO A PC T urn off your computer before perform ing the procedure below . 1. Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the computer ’ s D-Sub port.
11 CONNECTING TO A A/V DEVICE: Figure 3: Connecting A/V Devices.
12 ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of the monito r , and then adjust the monitor ’ s angle to your own preference. • Hold the stand so you do not topple the mon itor when you change the monitor ’ s angle.
13 OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or of f. The other control butt ons are located on the front panel of the monitor (See Figu re 4). By changing these settings, the picture can be adjuste d to your personal preference.
14 FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF monitor ’ s power . • Power Indicator: Blue — Power On mode. Orange — Power Saving mode. • MENU / RETURN: 1. T urn the OSD menu on/of f or re turn to the previous menu.
15 HOW T O ADJ UST A SETTINGS BRIGHTNESS/CONTR AST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display accordin g to your preference.
16 AUTO SEARCH From the 「 INPUT SETTING 」 menu, select the 「 AUTO SEARCH 」 option to activate or deactivate the automatic signal search function. COLOR SETTING WA R M NA TURE COOL Adjust the color temperature valu e of the display according to your preference: W ARM /NA TURE/ COOL.
17 H-POSITION Select the 「 H-POSITION 」 option to shift the screen im age to the left or right. Enter the option and adjust the level. [For D-sub only] V - POSITION Select the 「 V -POSITION 」 option to shift the screen image up or down. Enter the option and adjust th e level.
18 OSD SETTING LANGUAGE Select 「 LANGUAGE 」 option to change the language of the OSD. Enter the option and select a language. (Reference only , the OSD Language depends on the selected model) H-POSITION Select 「 H-POSITION 」 option to adjust the hori zontal position of the OSD.
19 SYSTEM AUDIO INPUT While transferring v ia the HDMI port, it is recommended to set AUDIO INPUT to HDMI; if no soun d is outputted, it is recommended to select AUDIO INPUT as PC, and make sure the PC audio output cable is connected to monitor’s LINE IN (or AUDIO IN) port.
20 PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capa bilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depe nding on the level of DDC used, communicate additional information about its display capabilities.
21 TECHNICAL SUPPOR T (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connecte.
22 No sound is outputted from monitor ’ s built-in speaker *Make sure PC audio output cab le is connected to screen ＇ s LINE IN port (or AUDIO IN port). *Make sure the sound volume adjustment can be clearly identified. *Make sure the System > Silence option in the monitor menu is on.
23 ERROR MESSAGE & POSSIBLE SOLUTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly conne cted, if the connector is loose, tighten the connector ’ s screws.
24 APPENDIX SPECIF ICA TIONS Driving system TFT Color LCD Size 28” (27.5" viewable) LCD Panel Pixel pitch 0.309mm(H) x 0.309mm(V) H-Frequency 30KHz – 80KHz V ideo V - Frequency 56Hz– 75Hz Display Colors 16.7 M Colors Max. Resolution WUXGA 1920 x 1200 @60Hz Plug & Play VESA DDC2B TM ON Mode 64.
An important point after buying a device HANNspree HF289 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HANNspree HF289 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HANNspree HF289 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HANNspree HF289 you will learn all the available features of the product, as well as information on its operation. The information that you get HANNspree HF289 will certainly help you make a decision on the purchase.
If you already are a holder of HANNspree HF289, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HANNspree HF289.
However, one of the most important roles played by the user manual is to help in solving problems with HANNspree HF289. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HANNspree HF289 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
