Instruction/ maintenance manual of the product JG191A Hanns.G
Go to page of 21
Congratulations! You have just purchased a TCO' 99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
computers. The labeling scheme is developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), by Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation), and by Statens Energimyndighet (The Swedish National Energy Administration).
TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regardi ng TCO'99 approved and labeled products may also be obtained via the Internet, using the address: http://www.tco-info.
TCO'99 requirement states that batte ries, the color-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high dos es.
Operation Instructions Thank you for purchasing this monitor, a high-resolution multi-scan color monitor. Please read this guide thoroughly before installation.
Content Safety Precautions ......................................................................1 First Setup ....................................................................................2 Front Panel Control ..................................
Safety Precautions This monitor is manufactured a nd tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to th e monitor as well as to the user. Carefully go over th e following WARNINGS before installation and keep this guide handy.
First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories : Video cable with 15 pin D-SUB connector . Power C able. User guide book or CD-ROM. Quick Installation 1. Connect video cable Make sure both the m onitor and computer are powered OFF.
Front Panel Control ACTIVATE/EXIT OSD SELECT DESIRED FUNCTION SCROLL DOWN/DECREASE POWER ON/OFF SCROLL UP/INCREASE LED INDICATER Installation 3 POWER INPUT AUDIO INPUT .
Using OSD Functions 1. Press the { button to display the main menu shown below. 2. Press the V or W button to scroll to the desired menu option. 3. Press the | button to select the menu option. 4. Press the V or W button to select submenu option. 5. After making adjustment, press { button to save changes and exit the screen.
Contrast : To adjust the foreground white level of screen image. V : increase contrast, W : decrease contrast. Brightness : To adjust the background black level of screen image.
9300K --Adds blue to screen image for cooler white. 6500K --Adds red to screen image for warmer white and richer red. 5400K --Adds green to screen image for a darker color. User Color : Individual adjustments for red (R), green (G), blue (B). 1. Press button | to select the desired color.
Image Adjust : To manually adjust the Horizontal /Vertical position ,H. Size, Fine Tune and Sharpness. H./V. Position : To adjust the horizontal and vertical position of the video. H. Position V : move screen to the right, W : m ove screen to the left.
Fine Tune : To adjust the delay time of data and clock. Press W or V to adjust to user preference. Sharpness : To adjust the clarity of a non-SXGA (1280x1024) signal. Press W or V button to adjust. 8 Setup Menu : To setting language Select, Resolution Notice, OSD P osition and OSD Ti m e Out and Input Select (Analog).
Language Select : To allow the user to choose from available language. Resolution Notice : There is a OSD message of "For best picture quality change resolution to 1280 x 1024" displayed on .
OSD Position : Press the button to select the horizontal or vertical OSD position. Horizontal OSD Position ： To horizontally replace the OSD position. V ： move OSD to the right, W ： move OSD to the left. Vertical OSD Position ： To vertically replace the OSD position.
Input Select : When press Input Select change Input signal to Analog or Digital. Memory Recall : To return to the factory setting condition, about Picture ＆ Audio setting. Press the button | to select the Memory Recall menu option. Audio Menu: Volume: To adjust the volume of speaker output.
12 Supporting Timing modes V G A 7 2 0 x 400 @ 70Hz V G A 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @.
13 Technical Information Technical Specification LCD Panel 19.0” TFT Power Management Energy Star compliant VESA DPMS compatible < 2 W Displayable Resolution SXGA 1280 x 1024 max. Vertical Frequency 75Hz max. Pixel Dimension 0.294 x 0.294 mm LCD Display Color 16.
Care and Maintenance Care Avoid exposing your m onitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare. Put your m onitor in a well ventilated area. Do not place any heavy things on top of your monitor.
Wrong or abnormal colors If any colors (red, green, blue) are mi ssing, check the vi deo cable to make sure it is securely connected. Loose or broken pi ns in the cable connector could cause an improper connect ion. 15 Connect the moni tor to another comput er.
An important point after buying a device Hanns.G JG191A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hanns.G JG191A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hanns.G JG191A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hanns.G JG191A you will learn all the available features of the product, as well as information on its operation. The information that you get Hanns.G JG191A will certainly help you make a decision on the purchase.
If you already are a holder of Hanns.G JG191A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hanns.G JG191A.
However, one of the most important roles played by the user manual is to help in solving problems with Hanns.G JG191A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hanns.G JG191A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
