Instruction/ maintenance manual of the product HU196D Hanns.G
Go to page of 23
19 inch TFT LCD Monitor USER’S MANUAL.
.
User’s Manual Before operating the monitor, please read th is manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference S t atement This equipment has been tested and found to comp ly with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules.
User’s Manual TCO’99 (FOR OPTIONAL MODEL) Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for pr ofessional use.
User’s Manual Labelled products must meet strict environmental demands, for ex ample, in respect of the reduction of electrical and magnetical fields as well as work load and visual ergonomics. Below you will find a brief summa ry of the ecological requirem ents met by this product.
User’s Manual T ABLE OF CONTENTS SAFETY NOTICE ........................................................................................... 7 PRECAUTIONS ......................................................................................... 7 SPECIAL NOTES ON LCD MONIT ORS .
User’s Manual SAFETY NOTICE 1. The changes or modifications not expr essly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord , if any , must be used in order to comply with the emission limits.
User’s Manual SPECIAL NOTES ON LCD MONIT ORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on agai n to make sure the flicker disappears.
User’s Manual BEFORE YOU OPERA TE THE MONIT OR FEA TURES • 19” TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions : 1280 X 1024 @60Hz • EP A ENERGY ST AR ®.
User’s Manual INST ALLA TION INSTRUCTIONS Inst all Remove Figure.1. Installing and Removing the Base POWER POWER SOURCE: 1. Make sure that the power cord is th e correct type required in your area.
User’s Manual CONTROLS AND CONNECT ORS CABLE CONNECTIONS: T urn of f your computer before performing the procedure below . 1. Connect one end of the 15-pi n D-Sub cable to the back of the monitor and connect the other end to the computer ’s D-Sub port.
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of t he monitor , then adjust the monitor ’s angle to your own preference. • Hold the st and so you do not topple the monitor when you change the monitor ’s angle.
User’s Manual OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (S ee Figure 4). By changing these settings, the picture can be adjusted to your personal preferences.
User’s Manual FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor ’s power . • Power Indicator: Green — Power On mode. Orange — Off mode. • MENU / ENTER: 1. Active OSD menu or f unction adjust confirm or 2.
User’s Manual HOW TO ADJUST A SETTING OSD Diagram OSD Description Brightness adjustment: Select the 「 Brightness 」 option on the 「 Main Menu 」 . Enter the option and adjust the level. Contrast adjustment: Select the 「 Contrast 」 option on the 「 Main Menu 」 .
User’s Manual OSD Diagram OSD Description Clock adjustment: Select the 「 Clock Adjustment 」 option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. Phase adjustment: Select the 「 Phase Adjustment 」 option to reduce the horizontal flicker of characters on the screen.
User’s Manual OSD Diagram OSD Description How to set the OSD: Select 「 OSD Setting 」 on the 「 Main Menu 」 , and then enter the option. OSD horizontal adjustment: Select the 「 OSD H-Position 」 option to adjust the horizontal pos ition of the OSD.
User’s Manual OSD Diagram OSD Description 18 OSD color setting: Select the 「 OSD Color 」 setting option to adjust the color of the OSD. Enter the option and adjust the level. Language: Select the 「 Language 」 option to change the language of the OSD.
User’s Manual OSD Diagram OSD Description Recall the factory settings: Select the 「 Factory Preset 」 option to change between the monitor’s default settings and the current settings. Enter the option and select On or Off. Input Setting: Select the 「 Input Setting 」 option to change between the analog (D-Sub) or Digital (DVI) source.
User’s Manual TECHNICAL SUPPORT (F AQ) Q & A FOR GENERAL DEFECTIVE PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position *Power Cord shoul.
User’s Manual ERROR MESSAGE & PO SSIBLE SOLUTION CABLE NOT CONNECTED : 1. Check that the signal-cable is properly con nected, If the connector is loose, tighten the connector ’s screws. 2. Check the signal-cable’s connection pins for damage.
User’s Manual APPENDIX SPEC IFICA TIONS Driving system TFT Color LCD Size 48.2cm(19.0") Pixel pitch 0.294mm(H) x 0.294mm(V) LCD Panel Brightness 250cd/m 2 (T ypical) Contrast 600:1 (T ypical) V.
User’s Manual CONNECT OR PIN ASSIGNMENT 15 - Pin Color Display Signal Cable: 15 6 10 11 15 PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Ground 3. Blue 11. Ground 4. Ground 12. DDC-Serial Data 5. Ground 13. H-Sync 6. R-Ground 14.
An important point after buying a device Hanns.G HU196D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hanns.G HU196D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hanns.G HU196D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hanns.G HU196D you will learn all the available features of the product, as well as information on its operation. The information that you get Hanns.G HU196D will certainly help you make a decision on the purchase.
If you already are a holder of Hanns.G HU196D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hanns.G HU196D.
However, one of the most important roles played by the user manual is to help in solving problems with Hanns.G HU196D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hanns.G HU196D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
