Instruction/ maintenance manual of the product HL195 Hanns.G
Go to page of 23
HL195 HSG1 145 OSD[V4.393].
User ’ s Manual OSD[4.393] 2 Before operating the monitor, please read this manual thoroughly. This manual should be retaine d for future reference. FCC C lass B Radio F requenc y Interfer ence S tatement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
User ’ s Manual 3 Congratulations! This display i s designed for both you and the pl anet! The display you have just purchased carries the T CO Certified label. This ensu res that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
User ’ s Man ual 4 RECYCLING INFORM ATION We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropria te treatm ent and recycling of industrial technology devices at the end-of-life.
User ’ s Manual 5 T ABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 6 PRECAU TIONS ....................................................................................
User ’ s Man ual 6 SAFETY NOTICE 1. The changes or modifications not expressly approved by the part y responsible for compliance could void the user's authority to operate the equipment. 2. Sh ielded interface cables and AC power cord, if an y , must be used in order to comply with the emission limits.
User ’ s Manual 7 SPECIAL NOTES ON LC D MONIT ORS The following symptoms are normal with LCD monitor and do not indicate a problem. Due to the nature of the fluorescent light, the screen may flicker during initial use. T urn off the Power Switch and then turn it on again to make sure the flicker disappears.
User ’ s Man ual 8 BEFORE YOU OPERA TE THE MONIT OR FEA TURES 47c m / 18.5" W ide Screen TFT Color LED Backlight Monitor Crisp, Clea r Display for W indows EP A ENERGY S T AR ® .
User ’ s Manual 9 INST ALLA TION INSTRUCTIONS INST ALL REMOVE Figure.1. Installing and Removing the Ba se INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base.
User ’ s Man ual 10 SETTING THE MON ITOR ON THE W ALL DISSEMBLING THE ST AND BASE: 1. Disconnect all the cables and cords from the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor .
User ’ s Manual 11 MAKING CONNECTIONS CONNECTING TO A PC T urn off your computer before performing the procedure below . 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer ’ s VGA port.
User ’ s Man ual 12 ADJUSTING THE VIEWING ANGLE F or optimal viewing it is recommended to look at the full face of the monitor , then adjust the monitor ’ s angle to your own pre ference. Hold the stand so y ou do not topple the mon itor when you change the monitor ’ s angle.
User ’ s Manual 13 OPERA TING INSTRUCTIO NS GENERAL INSTRUC TIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Fi gure 4). B y ch anging these settings, the picture can be adjusted to your personal preferences.
User ’ s Man ual 14 FRONT P A NEL CONTROL Power Button: Press this button to switch ON/OFF of monitor ’ s power . Power Indicator: Green — P ower On mode. Orange — Power Saving mode. MENU / RETURN : 1. T urn the OSD menu on/off or return to the previous menu.
User ’ s Manual 15 Resolution 640x400@70Hz ↔ 720x400@70Hz 640x400@85Hz ↔ 720x400@85Hz 640x480@60Hz ↔ 720x480@60Hz 1024x768@70Hz ↔ 1280x768@70Hz 1280x768@60Hz ↔1360x768@60Hz 1400x1050@60Hz .
User ’ s Man ual 16 HOW T O ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference.
User ’ s Manual 17 display , which does not ensure the image is shown as is or in initial scale. 「 FIT 」 indicates scaling by the proportion of original images, which may cause the screen showing black bands.
User ’ s Man ual 18 the OSD. Enter the option and adjust the level. OSD TI ME- OUT Select 「 OSD TIME-OUT 」 opti on to set the OSD time out from 10 to 100 seconds.
User ’ s Manual 19 PLUG AND PLA Y Plug & Play DDC2B F eature This monitor is equipped with VESA DDC2B capabilities accor ding to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.
User ’ s Man ual 20 TECHNICAL SUPPOR T (F AQ) Q & A FOR GEN ERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible.
User ’ s Manual 21 INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port) . [For HDMI Input only].
User ’ s Man ual 22 ERROR M ESSAGE & POSSIBLE SOL UTIONS CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, I f the conn ector is loose, tighten the connector ’ s screws. 2. Check the signal- cable’ s connection pins for damage.
User ’ s Manual 23 APPENDI X SPECIFICA TIONS LCD Panel Driving system TFT Color LED Size 47cm / 18.5" Diagonal Pixel pitch 0.300mm(H) x 0.300mm(V) V ideo H-Frequency 24KHz – 61 KHz V -Frequency 56 – 75Hz Display Colors 16.
An important point after buying a device Hanns.G HL195 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hanns.G HL195 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hanns.G HL195 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hanns.G HL195 you will learn all the available features of the product, as well as information on its operation. The information that you get Hanns.G HL195 will certainly help you make a decision on the purchase.
If you already are a holder of Hanns.G HL195, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hanns.G HL195.
However, one of the most important roles played by the user manual is to help in solving problems with Hanns.G HL195. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hanns.G HL195 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
