Instruction/ maintenance manual of the product Document Reader 4800dr Hand Held Products
Go to page of 12
™ Document Reader Quick Start Guide 4800 dr.
1 Note:Refer to your Barcode Manual for information about cleaning your device. For localized language versions of this document, go to www.handheld.com. Assembling the 4800dr Place arm on tray. Use the 3 screws provided to attach the arm to the underside of the tray.
2 Place the imager in the stand. Press the cable firmly into the wire run along the back of the arm. (You must use the USB cable that’s supplied with the 4800dr or a compatible 5 volt powered cable.
3 Imager Mounting Details If you are planning to moun t the imager in a fixed posi tion, the following diagram shows the mounting hole placement a nd details.
4 TTL-232 Connection.
5 Interface Scan the barcode that describes th e PC or interface you are using. Aligning the Document Reader T ray Proper cable placement is important for ac curate alignment of the device. Place the cable in the wire channel if the image r will remain in the base most of the time.
6 3. Make sure the serial number on the alignment page (the top number) matches the serial number on your document reader. 4. Press the button on the imager to disp lay the illuminated aimer crosshairs. You will hear a single beep that indicates you are using the correct page.
7 Europe, Middle East, and Africa Telephone: +31 (0) 40 7999 393 Fax: +31 (0) 40 2425 672 E-mail: eurosupport@handheld.com Asia Pacific Telephone - Hong Kong: +852-3188-3485 or 2511-3050 Telephone - China: +86 21 6361 3818 E-mail: aptechsupport@handheld.
8 Europe, Middle East, and Africa Telephone: +31 (0) 40 2901 633 Fax: +31 (0) 40 2901 631 E-mail: euservice@handheld.com Asia Pacific Telephone: +852-2511-3050 Fax: +852-2511-3557 E-mail: apservice@handheld.com Japan Telephone: +813-5770-6312 Fax: +813-5770-6313 E-mail: apservice@handheld.
9 HAND HELD PRODUCTS RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMI TED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT.
10.
Hand Held Products, Inc. 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 4800dr-QS Rev A 12/07.
An important point after buying a device Hand Held Products Document Reader 4800dr (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hand Held Products Document Reader 4800dr yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hand Held Products Document Reader 4800dr - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hand Held Products Document Reader 4800dr you will learn all the available features of the product, as well as information on its operation. The information that you get Hand Held Products Document Reader 4800dr will certainly help you make a decision on the purchase.
If you already are a holder of Hand Held Products Document Reader 4800dr, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hand Held Products Document Reader 4800dr.
However, one of the most important roles played by the user manual is to help in solving problems with Hand Held Products Document Reader 4800dr. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hand Held Products Document Reader 4800dr along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
