Instruction/ maintenance manual of the product 3800 Hand Held Products
Go to page of 20
3800 Linear Series QS.
1 For localized language vers ions of this document, go to www.handheld.com. Getting Started Turn off computer’s powe r before connecting the scanner, then power up the computer once the scanner is fully connected.
2 Keyboard W edge Connection Serial (RS-232) Connection.
3 Reading T echniques The view finder projects a red aiming beam that should be centered over the bar code. Hold the scanner over the bar code, pull the trigger, and center the aiming beam on the bar code. The aiming beam is smaller when the scanner is closer to the code and larger when it is farther from the code.
4 To read PDF417 bar codes with a PDF-enabled 3800, hold the trigger down and move the scanner up and down so the aiming line sweeps from the top of the bar code to the bottom, and back up. This ensures that the entire code is scanned. Note: This only applie s to a PDF enabled 3800.
5 Interface Scan the bar code that describes the PC or interface you are using. AT/PS2 Keyboard Wedge (Default) RS-232 USB Keyboard (PC) Emulate External Keyboard Japan DOS/V.
6 Keyboard Country Scan the Program Keyboard Country bar code below, then scan the numeric bar code(s) from page 10, then the Save bar code to program the keyboard for your country. As a general rule, the following characters ar e not supported by the scanner for countries other than the United States: @ | $ # { } [ ] = / ‘ < > ~.
7 Tr i g g e r The following bar codes will allow you to use the reader in Manual Trigger mode (need to press the trigger to read), Automatic Trigger mode (the beam is always on), or Presentation mode (the reader is activated when it “sees” a bar code).
8 Suffix If you want a carriage re turn after the bar code, scan the Add CR Suffix bar code . To add a tab after the bar code, scan the Add T ab Suffix bar code.
9 Data Format Editor Instructions The following are abbrevi ated instructions for entering a data format. For complete instructions refer to your User’s Guide, available at our website, www.handheld.com . 1. Scan the Enter Data Format symbol. 2. Primary/Alternate Format: scan 0 for Primary Format 3.
10 Programming Chart 0 2 1 4 3 5 6 7.
11 A B C D E F 9 8 Save.
12 V isual Menu To obtain access to additi onal features for the 3800, use Visual Menu, available from our website at www.handheld.com . For complete download instructions and descripti ons of Visual Menu’s features, refer to yo ur User’s Guide.
13 Europe, Middle East, and Africa: Telephone- European Ofc: +31 (0) 40 79 99 393 U.K. Ofc: +44 (0) 1925 24 00 55 E-mail: eutechsupport@handheld.com Asia Pacific: Telephone: +852-3188-3485 or 2511-3050 E-mail: aptechsupport@handheld.com America Latina: Teléfono: (704) 9 98-3998, opción 8 E-mail: latechsupport@handheld.
14 paid) with a copy of the dated purchase record attached. Contact the appro priate location below to obtain a Return Material Authorization number (RMA #) before returning the product. North America Hand Held Products Corporate Offices Telephone: (800) 782-4263, Option 3 Fax: (704) 566-6015 E-mail: naservice@handheld.
15 Japan Hand Held Products Japan Telephone: +81-3-5770-6312 Fax: +81-3-5770-6313 E-mail: apservice@handheld.com Online Product Service and Repair Assistance You can also access product service and repair assistance online at www.handheld.com . Limited W arranty Hand Held Products, Inc.
16 This warranty shall extend from the time of shipment for the duration published by Hand Held Products for the product at the time of purchase ("Warranty Period"). Any defective product must be returned (at purchaser’s expense) during the Warranty Period to Hand Held Products factory or authorized service center for inspection.
17 HAND HELD PRODUCTS RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT.
18 Disclaimer Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine whether any such changes have been made.
Hand Held Products 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 Linear-02-QS Rev A 6/06.
An important point after buying a device Hand Held Products 3800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hand Held Products 3800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hand Held Products 3800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hand Held Products 3800 you will learn all the available features of the product, as well as information on its operation. The information that you get Hand Held Products 3800 will certainly help you make a decision on the purchase.
If you already are a holder of Hand Held Products 3800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hand Held Products 3800.
However, one of the most important roles played by the user manual is to help in solving problems with Hand Held Products 3800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hand Held Products 3800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
