Instruction/ maintenance manual of the product RJ856UD American Dynamics
Go to page of 10
RS-422 SINGLE-POSITION JUNCTION BOX (J-BOX) 8000-2573-20, REV. H INSTALLATION GUIDE 1 of 10 RS-422 Single-Position Junction Box (J-Box) Installation Guide Figure 1. RS-422 J-Box RJ856UD and RJ856UD-1 Series This weather-tight box (Figure 1) provides Class 2 LPS power and data to the new SpeedDome Ultra outdoor camera housing.
RS-422 SINGLE-POSITION JUNCTION BOX (J-BOX) 8000-2573-20, REV. H INSTALLATION GUIDE 2 of 10 RS-422 Single-Position J-Box Specifications REG ID: SV JBOX1 Product Codes RJ856UD .............................. 120V with North American line cord RJ856UD-1 .
RS-422 SINGLE-POSITION JUNCTION BOX (J-BOX) 8000-2573-20, REV. H INSTALLATION GUIDE 3 of 10 Mounting the J-Box This section explains how to mount the J-box to a wall or pole. Parts Required Installation Kit (0351-1646-01) includes: Item Qty Part Number Screw, Self-tapping, 4.
RS-422 SINGLE-POSITION JUNCTION BOX (J-BOX) 8000-2573-20, REV. H INSTALLATION GUIDE 4 of 10 Outdoor Pole Mounting Outdoor mounting (Figure 3) requires that PC board, chassis, and power cord be removed to facilitate attachment to pole. PC board and chassis are reattached once box is secured.
RS-422 SINGLE-POSITION JUNCTION BOX (J-BOX) 8000-2573-20, REV. H INSTALLATION GUIDE 5 of 10 Connecting AC Power The J-box comes wired for 120Vac and has a 2m (6ft-7in) SJT 3-conductor power cord attached. Plug the cord into a dedicated 24-hour, unswitched outlet.
RS-422 SINGLE-POSITION JUNCTION BOX (J-BOX) 8000-2573-20, REV. H INSTALLATION GUIDE 6 of 10 6. Run conduit and ac cable to box and clamp conduit in place (Figure 7). 7. Reattach transformer chassis. Figure 7. Conduit attachment 8. Wire ac line to TB1 and jumper primary taps of transformer according to ac source (refer back to Figure 6).
RS-422 SINGLE-POSITION JUNCTION BOX (J-BOX) 8000-2573-20, REV. H INSTALLATION GUIDE 7 of 10 Procedure 1. Turn power switch in J-box to off (0). Power LED should be off. 2. Route power and data cables through one of two extra strain relief fittings in bottom of box.
RS-422 SINGLE-POSITION JUNCTION BOX (J-BOX) 8000-2573-20, REV. H INSTALLATION GUIDE 8 of 10 Troubleshooting Problem Possible Solution No Power First check both fuses, then look for open or loose wire connections at TB1. If loose, reconnect wires. Measure voltage across 0 and 24V taps of secondary winding on transformer.
RS-422 SINGLE-POSITION JUNCTION BOX (J-BOX) 8000-2573-20, REV. H INSTALLATION GUIDE 9 of 10 Ordering Parts Only the following parts can be ordered: • RS-422 PC Board 0312-0163-02 • Power Transformer 5604-0205-01 • Cable Strain Relief 3100-0035-11 • Fuse 5111-0017-21.
RS-422 SINGLE-POSITION JUNCTION BOX (J-BOX) 8000-2573-20, REV. G INSTALLATION GUIDE 10 of 10 Declarations This product can only be used with American Dynamics products and other approved products from Sensormatic Electronics Corporation. When the unit is hard wired, the disconnect device (circuit breaker) must be readily accessible.
An important point after buying a device American Dynamics RJ856UD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Dynamics RJ856UD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Dynamics RJ856UD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Dynamics RJ856UD you will learn all the available features of the product, as well as information on its operation. The information that you get American Dynamics RJ856UD will certainly help you make a decision on the purchase.
If you already are a holder of American Dynamics RJ856UD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Dynamics RJ856UD.
However, one of the most important roles played by the user manual is to help in solving problems with American Dynamics RJ856UD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Dynamics RJ856UD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
