Instruction/ maintenance manual of the product MC4-H2 Hall Research Technologies
Go to page of 12
U U s s e e r r ’ ’ s s M M a a n n u u a a l l UMA1091 Rev. 1.1 Model MC4-H2 and MC4-H2-SW Dual Head KVM Switch Control 4 Dual Video output PC's from one set of Monitors, keyboard and mouse H all R esearch T echnologies, Inc 1163 Warner Ave.
.
- 1 - T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s FEDERAL COMMUNICATIONS COMM I SSION (FCC) ST ATEMENT ....................................... 2 INTRO DUCTION ............................................................................
- 2 - F eder al Communica tions Co mmission (FCC) Sta tement This equipment generates, use s and radiates radio frequency en ergy an d, if not installed an d used in accordance with the instructions, may cause harmful interference to radio co mmunications.
- 3 - Suppor ted Systems and Periphe rals • All PC compatible systems and note books • Standard PS/2 and AT Keyboar ds (Legacy AT keyboards may req uire connector adapter s) • Standard (2 -button) an d wheel (3 -button) (e. g. Microsoft ® Intellimouse) mice.
- 4 - Setup FIGURE 1 MC4-H2 Connector Functions on Rear Panel FIGURE 2 CA-100872 Cable for connection to ea ch PC 1. Use the special CA10087- 6 or -10 (4-i n-1) cable t o connect PC A to the M C4-H2 or MC4-H2-SW . The DB25 connector plugs into the MC4-H2 o r MC4-H2-SW .
- 5 - Operation The keyboard and mouse will function no differently th an if the keyboard and mouse were connected directly to the PC. Switc hing You can use of three ways to switch am ong the PCs. The first way is to simply press the button for the desired PC on the fron t panel of the MC4-H 2 or MC4-H2-SW .
- 6 - F r ont Panel Pu sh Buttons: Hold down the buttons for port A and port D simultaneously for 3 seconds on the unit where you want to chang e the address. When you see the LED's begi n to flash this indicates that the a ddress can now be changed for this unit.
- 7 - Stack ing (Daisy-Chaining) of Mult iple MC4-H2 or MC4-H2-SW Units In order to connect two or more units to expand the number of PC ’s t hat you co ntrol, y ou need t o order a Daisy-C hain Cabl e Set. Connect the OUT of the Slave #1 to the IN of the Master.
- 8 - Hot Swapping PC’ s You may hot swap a PC while the MC4-H2 or MC4- H2-SW is powere d up only after that P C has been turned off . After the PC has been tur ned off, unpl ug the keyboard, mouse, and video connectors of t he CA10087 (4-in-1) cabl e then plug them into the PC you wish to insert into the MC4-H2 or MC4-H2-SW setup.
.
© Copyright 2008. Hall Resear ch Technologies, Inc. All rights reserved. . . . . . . . . H all R esear ch T echnologies, I nc. 1163 Warner Ave. Tustin, CA 92780 Phone: (714) 641-6607 Fax:(714) 641-66.
An important point after buying a device Hall Research Technologies MC4-H2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hall Research Technologies MC4-H2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hall Research Technologies MC4-H2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hall Research Technologies MC4-H2 you will learn all the available features of the product, as well as information on its operation. The information that you get Hall Research Technologies MC4-H2 will certainly help you make a decision on the purchase.
If you already are a holder of Hall Research Technologies MC4-H2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hall Research Technologies MC4-H2.
However, one of the most important roles played by the user manual is to help in solving problems with Hall Research Technologies MC4-H2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hall Research Technologies MC4-H2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
