Instruction/ maintenance manual of the product WQP12-EFM Haier
Go to page of 12
Domestic Dishwasher WQP12-EFM WQP12-EFMS Code: 0120505622 GB.
NOTICE Carefully read the instructions contained in this manual, as they provide important information which is essential for safe and proper installation, use and maintenance of the appliance.
Close-up View (Interior) A B C D Upper Rack Rack Height Adjuster Top Spray Arm Lower Rack E F G H Bottom Spray Arm Washing Filter Detergent and Rinse Aid Dispenser Salt Container Cap Technical characteristics Width 60 cm Depth 60 cm Height 85 cm Capacity 12 standard place settings Mains water pressure 0.
Salt Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.
Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle Table ". The detergent dispenser is located on the inside panel of the door.
Loading the Dishwasher Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged, which re- sults in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they be allowed to soak before they are washed.
Turning on the Appliance Starting a wash cycle - Make sure that the plug of the appliance is inserted into the wall socket. - Make sure that the water supply is turned on to full pressure. - Load the dishwasher (see the section "Loading the Dishwasher").
- It is important to try and run the dishwasher when it is fully loaded in order to save on energy. In order to prevent odours from form ing and food from caking onto the dishes, you can run the soak cycle. - Choose the right wash cycle: the choice depends on the type of dishware, cookware and utensils being washed and how dirty they are.
Wash Cycle Table Cycle Cycle Selection Information Description of cycle Detergent Rinse Aid Heavy Duty Normal Wash EN 50242 Rinse Soak Very dirty dishes, pots and pans (not to be used with delicate items). For dishes that need to be rinsed and dried only.
Cleaning and Special Maintenance Filter Assembly For best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle.
fig.1 Installation Positioning the Appliance Position the appliance in the desired location. The back should rest against the wall, and the sides along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or left to facilitate proper installation.
Installation Diagram The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
An important point after buying a device Haier WQP12-EFM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier WQP12-EFM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier WQP12-EFM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier WQP12-EFM you will learn all the available features of the product, as well as information on its operation. The information that you get Haier WQP12-EFM will certainly help you make a decision on the purchase.
If you already are a holder of Haier WQP12-EFM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier WQP12-EFM.
However, one of the most important roles played by the user manual is to help in solving problems with Haier WQP12-EFM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier WQP12-EFM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
