Instruction/ maintenance manual of the product WQP12-CFESS Haier
Go to page of 6
Domestic Dishwasher WQP12-CFESS Code:0120502885.
Close-up View (Interior) .2. Close-up View (control panel) A B C D E F G H I J "HALF LOAD" indicator light Low rinse aid indicator light Water heating indicator light Cycle select button Cyc.
.3. .4. Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle Table." The detergent dispenser is located on the inside panel of the door.
.5. .6. Starting the Appliance Starting a wash cycle After having completed all of the installation steps in the preced- ing paragraphs, turn on the water to the unit, partially open the door of the dishwasher, and press the ON-OFF button "A" lo- cated on the control panel.
.7. .8. Energy Saving Tips -It is important to try and run the dishwasher when it is fully loaded in order to save on energy. In order to prevent odors from forming and food from caking onto the dishes, you can run the hold cycle.
.9. Installation Positioning the Appliance Positioning the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left of the appliance.
An important point after buying a device Haier WQP12-CFESS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier WQP12-CFESS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier WQP12-CFESS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier WQP12-CFESS you will learn all the available features of the product, as well as information on its operation. The information that you get Haier WQP12-CFESS will certainly help you make a decision on the purchase.
If you already are a holder of Haier WQP12-CFESS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier WQP12-CFESS.
However, one of the most important roles played by the user manual is to help in solving problems with Haier WQP12-CFESS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier WQP12-CFESS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
