Instruction/ maintenance manual of the product LCD-42K40-HD Haier
Go to page of 52
Owner ’ s Manual MODEL LCD-32K40 LCD-32K40A LCD-42K40-HD LCD-42K40A-HD LCD TV LCD-K40.indd 1 1/21/2010 10:47:00 AM.
2 IMPORT ANT INFORMA TION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: ● Using cabinets or stands recommended by the manufacturer of the television.
3 T O THE OWNER Before operating this LCD TV , read this manual thoroughly and operate the LCD TV properly . This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables you to manage those features and maintains it in better condition for a considerable time.
4 SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this LCD TV from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
5 T ABLE FEA TURE AND DESIGN........................................6 PREP ARA TION........................................7 P ART NAMES AND FUNCTIONS 7-8 CONNECTING LCD TV .
6 Feature and Design ● High Definition LCD Panel VIZON Engine, SANYO High Quality Image Processing T echnology reproduces clear, dynamic, natural and realistic picture along with HD LCD Panel T echnology .
7 INDICA TORS FRONT CARE FOR USING LCD TV ● Do not bump or scratch the panel surface as this causes flaws on the surface of the screen. ● There may be some tiny black points and/or blight points on the SCREEN .
8 Connect video and audio outputs from video equipment. ● Video (RCA type) ● Audio L and R (RCA type) ● S-Video (mini DIN 4 type) OK PS PREP ARA TION SIDE CONTROLS A V2 T erminal (Each button on the control panel has the same function with its counterpart on the remote control.
9 CONNECTING LCD TV INST ALLING ST AND Be careful of the panel. Suggest to put down the panel side on the cushion or other soft material before installing the stand.
10 R-AUDIO-L PR/CR PB/CB Y HDMI1 IN (DVI) AUDIO (DVI) HDMI2 IN AUDIO PC IN A V3 IN A V1 IN R-AUDIO-L VIDEO R-AUDIO-L VIDEO (MONO) ANT .75 HDMI4 IN IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA ) Desktop type Cables used for connection (These cables are not supplied with this LCD TV .
11 HDMI1 IN (DVI) HDMI2 IN AUDIO (DVI) AUDIO PC IN R-AUDIO-L PR/CR---PB/CB Y AV 1 I N R-AUDIO-L VIDEO R-AUDIO-L VIDEO (MONO) ANT .75 AV 3 I N HDMI4 IN External Audio Equipment Video Source (example) DVD Player Audio cable (RCA X 2) R L C R /P R ,C B /P B , Y Component Video Source (example) DVD video equipment.
12 POINT ▲ / ▼ / ◄ / ► buttons OK button CHANNEL UP ( ▲ ) button ECO button TXT/TV button CHANNEL RECALL button WIDE button BEFORE OPERA TION MENU button GAME button INPUT button OPERA TION .
13 Remove the battery compartment cover . Insert two size AAA batteries (1.5V) according to "+" and "-" polarity markings inside the battery compartment. Close the battery compartment cover . 1 2 3 30 30 15 15 5m Point Remote Control toward LCD TV (Infrared Remote Receiver) whenever pressing the buttons.
14 TV/A V/HDMI MODE MENU LIST MAIN MENU (CHANNEL MENU) CHANNEL SEMI-AUTO SEARCH MANUAL SEARCH COLOUR SYSTEM SOUND SYSTEM SKIP CHANNEL SWAP AUTO B/G OFF AUTO SEARCH SELECT ADJUST BACK EXIT :: : : CHANNEL MENU PICTURE MENU SOUND MENU ON-SCREEN MENU Note: ● "CHANNEL" menu doesn't work in A V3(DVD), HDMI mode and PC mode.
15 TV/A V/HDMI MODE MENU LIST MAIN MENU (CHANNEL MENU) ON-SCREEN MENU BEFORE OPERA TION CHANNEL SEMI-AUTO SEARCH MANUAL SEARCH COLOUR SYSTEM SOUND SYSTEM SKIP CHANNEL SWAP AUTO B/G OFF AUTO SEARCH SEL.
16 MAIN MENU (PICTURE MENU) Note: ● "CHANNEL" menu is actived in TV , A V1 or A V2(S-VIDEO) mode. ● "PC ADJUST" is only active in PC mode. ● SOUND/ TIMER/ OSD menu in PC mode is the same as TV/A V/HDMI mode, please refer to pages 14~15.
17 BASIC OPERA TION Connect LCD TV's AC Power Cord into an AC outlet. 2 1 3 TURNING ON / OFF LCD TV Complete the peripheral connections before turning on LCD TV . (Please refer to "CONNECTIN G LCD TV".) Press POWER ON/OFF button on Side Controls of LCD TV or on Remote Control to turn it ON.
18 CHANNEL RECALL Press CHANNEL RECALL button to switch between the previous channel and the current channel. For example, now you are watching channel "4", but you watched channel "2" previously . If you press CHANNEL RECALL button, channel "2" will appear immediately .
19 VOLUME 5 Press ECO button on Remote Control to set "ECO OFF", "ECO ON" or "ECO SENSOR". INFO Press INFO button on Remote Control to display the status of LCD TV .
20 BASIC OPERA TION STILL ON STILL SOUND MODE ST ANDARD NEWS MUSIC PERSONAL Select sound level by pressing SOUND button on Remote Control. ST ANDARD Normal sound state preset on LCD TV . Select this mode for talk programs. Select this mode for music programs.
21 BASIC OPERA TION WIDE Select screen size among "FULL", "ZOOM", "ZOOM[CAPTION- IN]", "NORMAL" and "NA TURAL" by pressing WIDE button on Remote Control. FULL ZOOM Provides real 4 : 3 image on 16 : 9 screen.
22 OFF FOOTBALL WINTER SPORTS MARINE SPORTS INDOOR SPORTS Select SPORTS mode "OFF", "FOOTBALL", "WINTER SPORTS", "MARINE SPOR TS" and "INDOOR SPORTS" by pressing SPORTS button repeatly on Remote Control.
23 GAME MODE Game mode will reduce time lug of LCD-TV to display picture from game console. SETUP CHILD LOCK ON AUTO SHUT OFF ON ECO SENSOR DYNAMIC AI ON ACTIVE CONTRAST ON GAME MODE OFF GAME INPUT SEL HDMI1 HDMI LINK PC ADJUST SHOP MODE SELECT ADJUST BACK EXIT :: : : AV 1 AUTO GAME Figure A.
24 Press PIP button to display sub picture. 1 During PIP mode, pressing the P-SW AP button will switch main and sub picture. The sound on the main picture and the sub picture also changes at the same time. Each time PIP button is pressed, the location of sub picture is changed as follows.
25 The following combination (Main and Sub picture) in the PIP and POP mode, " " indicates that it is possible for combination, and "X" indicates that it is impossible for combination.
26 XACTI LINK Make sure that HDMI input is connected to Xacti if Xacti button is pressed. (The connecting way , please refer to "Connecting to the HDMI terminal" on the INSTRUCTIONS MANUAL(Xacti).) After connecting the Xacti to the television, switch the TV input to the terminal which the Xacti is connected.
27 USB BASIC OPERA TION After Flash disk, Mobile Hard Disk or other USB devices are inserted the USB terminal, you can read photos. The USB system only supports JPEG format. Note: ● Do not pull in/out USB device frequently . If you pull out USB device when it is being played, maybe it would result physical deterioration for USB device or LCD TV .
28 TEXT INDEX button TEXT YELLOW button TXT/TV button TEXT RED button OPERA TION OF REMOTE CONTROL (IN TEXT MODE) POWER ON/OFF button NUMERIC buttons TEXT CANCEL button TEXT BLUE button TEXT SUBCODE b.
29 TEXT/ TV TEXT REVEAL TEXT CANCEL Press TXT/TV button to select teletext. Press this button again will display: ■ TV mode: TV -> TEXT mode -> MIX mode -> TV ■ A V mode: A V -> TEXT mode -> MIX mode -> A V Note: ■ TEXT mode: TEXT screen is displayed.
30 TEXT SIZE Press TEXT SIZE button to enlarge the top half of the text page. Press TEXT SIZE button again to enlarge the bottom half of the text page.
31 MENU OPERA TION (TV/A V/HDMI mode) All receivable channels are automatically tuned in and memorized in consecutive programme position. ● The Automatic T uning operation can be cancelled at any time by pressing BACK button or MENU button.
32 The setting for sound system is only active in TV mode. Usually , the sound system is set to the position of "B/G". In case of abnormal sound, repeatedly press POINT ◄► buttons to select "I", "D/K", "M" or "B/G" until the best sound effect is reached.
33 1 Note: ● "TINT" cannot be selected except for NTSC/ NTSC4.43 system. ● 3D NR will prohibited during 1080p mode. PICTURE Press MENU button and the main menu will appear . Press POINT ◄► buttons to select "PICTURE", and will display PICTURE menu.
34 Adjust the balance of the left and right channels. (-15~15) Select different frequency ranges of sound separately by pressing POINT ◄► buttons. Adjust values of "120 Hz", "500 Hz", "1.5 KHz", "5KHz", "10KHz" by pressing POINT ◄► buttons.
35 TIMER TIMER MENU 1 2 Press MENU button and the main menu will appear . Press POINT ◄► buttons to select TIMER. Press POINT ▼ buttons to enter into TIMER menu. Press POINT ▲▼ buttons to select the item desired. ■ Press BACK button to return to the previous menu.
36 MENU OPERA TION (TV/A V/HDMI mode) OSD OSD MENU 1 2 Press MENU button and the main menu will appear . Press POINT ◄► buttons to select OSD. Press POINT ▼ buttons to enter into OSD menu. Press POINT ▲▼ buttons to select the item desired. ■ Press BACK button to return to the previous menu.
37 MENU OPERA TION (TV/A V/HDMI mode) SETUP ■ Press BACK button to return to the previous menu. ■ Press MENU button or wait for 5~60 seconds (refer to "DURA TION" on page 36) to exit menu operation. SETUP MENU 1 2 Press MENU button and the main menu will appear .
38 SHOP MODE HOME MODE Press POINT ◄► buttons to enter into SHOP MODE menu. Press POINT ◄► buttons to choose HOME MODE or SHOP MODE. Press OK button to enter into HOME MODE or SHOP MODE. In this mode, the adjustments you have set of "Picture mode" and "ECO" will be stored as the last memory automatically .
39 PICTURE BRIGHTNESS Press POINT ◄ button to adjust image darken, and POINT ► button to adjust image brighten. (0~100) COLOUR TONE This function is used for selecting colour temperature. Select "PERSONAL", "NORMAL", "W ARM" or "COOL" with POINT ◄► buttons.
40 SOUND Note: For the details, please refer to "SOUND" on page 34. TIMER Note: For the details, please refer to "TIMER" on page 35. OSD Note: For the details, please refer to "OSD" on pages 36. MENU OPERA TION (PC mode) ■ Press BACK button to return to the previous menu.
41 PC ADJUST This function is used to adjust the position of image displayed on screen. It can be selected when the LCD TV could be received PC signal and in PC mode. (Refer to "SIGNAL MODE COLUMN" on page 47.) Press POINT ◄► buttons to enter PC SCREEN menu.
42 DEALER MODE The Dealer Mode has 9 different modes: VOLUME LOCK, TUNING LOCK, ST ART MODE, OSD, RC, AC POWER MODE, ST ART VOLUME LEVEL, MUSIC MODE SETUP and RESET . REMOTE CONTROL VOLUME LOCK This function is used to limit the maximal volume. ST ART MODE The LCD TV will automatically enter to the setting mode while being turned on.
43 RESET This function returns all setting values to the factory default settings. MUSIC MODE SETUP MUSIC mode is used to block picture on channel program. Use this feature to set Music Mode condition in set 5 Position Channel. 1 2 Press and hold Menu button on Side Controls, and press INFO button on remote control to display Dealer mode menu.
44 Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV . Clean your LCD TV as follows: ● Gently wipe the screen and cabinet with dry soft cloth. ● The screen is likely to be damaged if it is not maintained properly . Do not use hard objects like a hard cloth or paper .
45 TROUBLE SHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected LCD TV to your equipment as described in the section "CONNECTING LCD TV" . 2. Check cable connection.
46 Model LCD-32K40/A , LCD-42K40/A-HD Maximum Visible Range LCD-32K40/A: 81cm ; LCD-42K40/A-HD: 106cm (Screen Diagonal Size) Picture Resolution LCD-32K40/A: 1366(H) x 768(V) ; LCD-42K40/A-HD: 1920(H) .
47 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 VGA IN (D-SUB) TERMINAL T erminal : D-SUB15 PIN Connect video output terminal of LCD TV to this terminal with VGA Cable (not supplied). When connecting Macintosh computer , the MAC Adapter (not supplied) is required.
48 When input signal is digital from DVD terminal, refer to the chart below . When input signal is digital from HDMI terminal, refer to the chart below .
49 UNINST ALLING ST AND BASE CAUTION IN UNINST ALLING ST AND BASE ● Through in uninstalling work, handling with more than two people is recommended. ● When holding (moving or lifting) the LCD Display , hold the display's body . Do not handle the LCD TV by holding the attached accessory parts (speakers), otherwise it may result in damage.
50 Note: For model LCD-42K40/A-HD, release screw in 6 holes with screw driver . Uninstalling Stand Base Pull the stand base out from the cabinet after all screws already removed.
51 Cover the holes where you remove the stand base from the dust etc. by paste the deck label (supplied) to these holes. 4 APPENDIX Uninstalling the stand base is completed now . 5 1pcs (Model LCD-32K40/A) Uninstalling Stand Base or 1pcs (Model LCD-42K40/A-HD) LCD-K40.
Part No. 1AA6P1P5823-- N7TK ( UE6-A ) SANYO Electric Co., Ltd. LCD-K40.indd 52 1/21/2010 10:47:44 AM.
An important point after buying a device Haier LCD-42K40-HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier LCD-42K40-HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier LCD-42K40-HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier LCD-42K40-HD you will learn all the available features of the product, as well as information on its operation. The information that you get Haier LCD-42K40-HD will certainly help you make a decision on the purchase.
If you already are a holder of Haier LCD-42K40-HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier LCD-42K40-HD.
However, one of the most important roles played by the user manual is to help in solving problems with Haier LCD-42K40-HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier LCD-42K40-HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
