Instruction/ maintenance manual of the product L26A16 Haier
Go to page of 38
Please READ this manual carefully before operating your TV, and retain it for future reference. LCD TV OWNER`S MANUAL MODEL : L26A16 L32A16 L37A16 L42A16 L26A18 L32A18 L37A18 L42A18 S.
Sa fety of operators has been taken into consideration at the design and manufacture phase, but inappropriate operation may cause electric shock or fire. T o prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of th product.
1. Retain these Instructions ---the safety and operating instructions should be retained for Future reference. 2. Heed Warnings ---All warning on the appliance and in the operating instructions should be followed. 3. Cleaning --- Unplug from the wall outlet before cleaning.
a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions.
Table of Contents Accessories Remote controller User's manual Alkaline battery(AA) 2 Power cable STILL STILL SLEEP SLEEP PIP PIP TV/AV TV/AV P.STD P.
Front control panel -This is a simplified representation of front panel. -Here shown may be somewhat dif ferent from your TV. Buttons and interface location 1. CH+/- : program minus and plus, menu options. 2. VOL+/-: volume decrease and increase, menu reset and entry .
HDMI/DVI Input Connect the monitor output connector from a DVD player to the appropriate input port. ANT IN HDMI/DVI IN1 PC IN Pr/Cr Pb/Cb Y IN2 SCART2 SCART1 DVD/DTV Input (Component ) Connect a component video/audiodevice to these jacks. Buttons and interface location Rear Control panel Earphone jack: Earphone audio output terminal.
Remote control Precautions 3 .Replace the cover of the battery compartment. Make sure that there is no obstacle between the remote controller and television set. As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or of f as you expect.
STILL SLEEP PIP TV/A V P .STD S.STD H.LOCK CH.LIST EXIT SCAN SWAP TIMER ZOOM ABC@ DEF JKL% GHI$ MNO STUV PQR& WXYZ *#() MUTE DISPLA Y CH+ CH- VOL- VOL+ MENU Keys of remote control STILL Picture static I/II (NICAM) MUTE Switches the sound on or of f Power Off/Standby any other programmed equipment off.
Ensure the remote control is pointed toward the remote control window on the display . No obstacles should be placed between the remote control and the remote control window .
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different. Mixer additional purchase Note * It is recommended that you'd better use 75 * Don't bind antenna cable and electric wire together .
ANT IN SCART2 Y/C SCART1 RGB HD-AUDIO HD-AUDIO PC/DVI AUDIO IN External Equipment Connection - T o avoid picture noise (interference), leave an adequate distance between the VCR And TV. VCR connection NOTE: All cables shown are not included with the TV .
HDMI/DVI OUTPUT HDMI/DVI IN1 PC IN Pr/Cr Pb/Cb Y IN2 HDMI/DVI IN2 Pr/Cr Pb/Cb Y IN1 HD-AUDIO HD-AUDIO PC/DVI AUDIO IN ANT IN Pr/Cr Pb/Cb Y IN2 SCART2 Y/C SCART1 RGB Pr/Cr Pb/Cb Y IN1 HD-AUDIO HD-AUDIO PC/DVI AUDIO IN RGB-DTV OUTPUT R AUDEO L YP bP r R AUDEO How to connect 1 .
ANT IN HDMI/DVI IN1 PC IN Pr/Cr Pb/Cb Y IN2 SCART2 Y/C SCART1 RGB HDMI/DVI IN2 AC IN Pr/Cr Pb/Cb Y IN1 HD-AUDIO HD-AUDIO PC/DVI AUDIO IN How to connect 1 . T o get the best picture quality , adjust the PC graphics card to ( 1024x768),60Hz. 2 . Use the TV`s PC IN port for video connections, depending on your PC connector.
Power source TO USE AC POWER SOURCE Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet. NOTES: Never connect the AC line cord plug to other than the specified voltage. Use the attached power cord only.
Switching ON/OFF the TV set 1 first, connect power cord correctly and the power indicator will light . 2 If the indicator is lighting in red, press the digit buttons or CH+/- button on the remote controller again or POWER or CH+/- button on the TV set.
This TV set has three methods to set channels, which are respectively full a utomatic, manual s earch fine tune. In this section, h ow to use the remote control to set channel i s explained. Y ou can also use buttons on the TV set to set channel. Automatic search Note : The TUNING menu will be only operated in normal TV and SCART mode.
Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. Tuning menu AUDIO ADJUST FUNCTION TIMER MENU PICTURE TUNING Program Number Edit Name Color System Sound System Manual Search AFT Skip OFF 18 C 28 AUTO D/K 62.
Tuning menu Program T able Program T able Red: Del; Green: Copy; Yellow: Name; Blue: Swap 001 002 003 004 005 006 007 008 009 010 Delete name Copy edit name Name channel 1 Press CH+/- to select the ch.
If the colour of some channel is abnormal Usually this should be set in the auto position. However if the colour displayed on the screen are incorrect, you can manually select the correct colour system. Press CH+/- button to select "Sound System", then press VOL-/+ button to select the correct sound system.
After the pro grams are presetting, you can skip some programs so that to select your favorite channels only . If you want to recover the skipped channel 1. Use Direct-digit Choosing button to select the number of the channel to be recovered. 2. Do the above steps again.
You can watch TV program in a presetting channel. How to select the desired program 1 Using "Program number" buttons . Press digit button to select the program.
Personal: Soft: Bright: A spare setting that can be adjusted to personal status Designed for rooms that have good all round lighting Designed for night time low light viewing Designed for rooms with h.
MENU AUDIO ADJUST TUNING FUNCTION TIMER PICTURE Vo lume Balance Audio Mode Treble Bass Auto Vo lume Woofer Music 0 0 0 0 1 Press MENU button and then use CH+/- button to select the AUDIO menu. 2 Press VOL+/- button and then use CH+/- button to select .
When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient. Eliminate sound 1 Press the MUTE button on the remote control and "Mute" type face will display on the lower part of the screen.
Time Setting AUDIO ADJUST TUNING FUNCTION TIMER MENU PICTURE Clock Off Time On Time On Prog. Remind Time Remind Prog. The clock will only work if the TV set is turned on or in standby . When the set is disconnect from the power supply or is turned off by the main power, the clock loses power and will need to be reset when the power is reconnected.
It is possible to select language, OSD transparent, Menu T imer and Calendar of the menu as follows: Function menu Function setup MENU FUNCTION AUDIO ADJUST TUNING TIMER PICTURE West Europe Language M.
Adjust menu The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. AUDIO ADJUST TUNING FUNCTION TIMER MENU PICTURE Display Mode Adjust RGB Default Auto Sync Color Temperature Black Stretch OFF 4:3 9300K It does work on the PC mode only.
AUDIO ADJUST TUNING FUNCTION TIMER MENU PICTURE Display Mode Adjust RGB Default Auto Sync Color Temperature Black Stretch OFF 4:3 9300K In PC input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture as follows: H Size Horizontal size of picture can be adjusted in this item.
Password OFF Tuner Lock Prog.Set Prog. Num Source Lock Child Lock Max Volume Clear Lock LOCK SET OFF 1 OFF 100 The password can be changed. After entering the Lock set menu, Press CH+/- to select password , Press VOL+/-, the screen will display the follow.
Prog Num Prog Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL+/- button, to select channel number.(The item is not available except TV signal.) Source Lock Source Lock is opted to hinder external input modes, such as AV , Scart and PC.
Other functions Display function NICAM If the broadcaster is transmitting Bilingual sound service. The button on the remote controller will allow up to 2 separate languages to be selected.
Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast (cable networks, satellite channels, etc.
(MIX) While in T eletext mode press the button will show the teletext data superimposed on top of the TV picture. Press the button again to revert back to Full text. (HOLD) Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number .
To remove dirt or dust, wipe the cabinet with a soft, dry , lint-free cloth. Please be sure not to use a wet cloth. Maintenance Cleaning the Screen - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV .
Specifications and functions Model Size (Wx x ) unit: mm main component DH Net Weight(Kg) ~150-240V , 50/60Hz External Antenna Impedance 75 ohm PAL, SECAM, NTSC L26A16 L26A18 Storage T emperature Storage Humidity -15 45 5% 90%, non-condensing L32A16 L32A18 1366X768(Dot) 53 5 20% 80% L26A16 L26A18 950X330X735 30kg 810X256X635 17kg 679X230X527 12.
Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for t echnical assistance. Note : Production of the screen requires high and precision technologies.
0090500952B 01.
An important point after buying a device Haier L26A16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier L26A16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier L26A16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier L26A16 you will learn all the available features of the product, as well as information on its operation. The information that you get Haier L26A16 will certainly help you make a decision on the purchase.
If you already are a holder of Haier L26A16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier L26A16.
However, one of the most important roles played by the user manual is to help in solving problems with Haier L26A16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier L26A16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
