Instruction/ maintenance manual of the product L2009-A Haier
Go to page of 25
USER'S MANUAL LCD TV RECEIVER Please read this manual carefully before using your television and keep this manual In a good place for future reference.
To users: Thank you for using our LCD-TV . Before connecting the LCD-TV and turning the power on, please read this book carefully . Please keep this book for later use. When it was loss of function by electrostatic shock, please switch the on/off button for restoring the function.
Safety Notice Items Incorrect usage will cause fire or electric shock. T o prevent this, please do as required when you are installing, using and cleaning this machine.
Front Panel Controls Control Panel Function 6 7 TV/AV MENU VOL- VOL+ CH- CH+ POWER 2 3 4 5 1. Power supply switch 2.TV/AV Select the input signals: COMPONENT/PC/A V/SV/TV 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up / Right orientation to adjust the item/Press to enter 5.
Connection Options The figure is just f or reference, p lease see t he real. The terminals of 09 series are opposite to the above. And the A C power supply s witch is on the back of the set) AV /S-VID.
Remote Control Key Functions When using the remote control, aim it towards the remote sensor on the TV Stand By MUTE Display current input signal information TV channel number select Set time to change the TV into the standby status after a period of preset time.
Remote Control Installing Batteries 3 2 1 1.Slide open the cover of the battery compartment on the back of the remote control. 2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment.
Connection Instructions Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker . Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Connection Instructions You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). PC Setup Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are of f; 3.
Connection Instructions VCR Setup Connection and use steps: 1.Read the user guide supplied with your A V devices and ensure that it has Composite or S-Video connectors; 2.Make sure that the power of the LCD-TV and the A V device are off; .Turn on the power of the LCD-TV first ; and then turn on the power of the A V device; 4.
Connection Instructions Cable TV Setup - A fter subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.
Basic Operating Instructions Turn on the LCD-TV Switch on the power button on the back of the set and the TV will in standby mode. When the POWER button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green.
Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection.
Menu Operations Picture Menu Options 1. Press MENU button to display the main menu, and V+/V- to select the main menu . 2. Press P+/P- to scroll t hrough the parameters 3.
Menu Operations 2. Press P+/P- button to enter the picture menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Menu Operations Audio Menu Options Continued You can adjust sound options to the levels you prefer. 2. Press P+/P- button to enter the audio menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference .
Menu Operations Function Menu Options Menu Language Selection : The menus can be shown on the screen in the selected language. First select your language. 1. 2. Press P+/P- button to select LANGUAGE. 3. Press V+/V- button to select your desired language.
Menu Operations Function Menu Options Continued 2. TXT LANGUAGE: T o switch the teletext languages. 3. TXT EAST/WEST : T o select EAST or WEST 4. DISPLA Y MODE:T o select the display mode between 4:3 and FULL SCREEN.. 5.BLUE SCREEN:T o set On, the screen will be in blue screen after 3 seconds if there is no signal.
Menu Operations Tuning Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen Note: This menu is only appears in TV mode . 2. Press P+/P- button to enter the tuning menu and to go up and down to select the desired option .
Menu Operations Tuning Menu Options Continued 7. EXCHANGE : Press V+ to display the menu as follows: Press P+/- to select the item and then V+/- to adjust the channel and V+ to confirm.
TELETEXT SIZE Button Press SIZE button to change display size : normal large top large bottom normal REVEAL Button Press REVEAL to reveal hidden words e.g. Quiz page answers . Press again to hide. Red/Green/ Yellow/Cyan Buttons These four buttons correspond to the differently colored subjects .
SUBCODE Button When T eletext information exceeds more than one page , it may take s ome time for the automatic changing of the sub pages to reach t he sub page you require . It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found .
T o assist in location possible faults use help guide below . Troubleshooting Guide Note: 1.If the fault can not be repaired using the above guide consult with your local authorized service center. 2.The TV set must only be repaired by a qualified registered service person.
Specifications Note: All specifications are subject to change without notice. All quality are approximate value. Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations. Accessories Picture, sound system Audio output External port Power requirements Temperature 1.
V0.1 0090508262.
An important point after buying a device Haier L2009-A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier L2009-A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier L2009-A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier L2009-A you will learn all the available features of the product, as well as information on its operation. The information that you get Haier L2009-A will certainly help you make a decision on the purchase.
If you already are a holder of Haier L2009-A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier L2009-A.
However, one of the most important roles played by the user manual is to help in solving problems with Haier L2009-A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier L2009-A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
