Instruction/ maintenance manual of the product HW-09CV03 Haier
Go to page of 16
HW -09CV03 HW -12CV03 No.0010503559.
Contents P ar ts Name ................................................................................................ 1 2-4 5-7 8 9 10-12 Operation Guide ....................................................................................... Maintenance .
Parts Name panel panel 1 HW -12CV03 HW -09CV03 Front Air inlet (indoor side) Air outlet (indoor side) Air inlet (outdoor side) Operation.
Operation panel After unit stops, don't restart it until 3 min. have elapsed. Mode selection OFF ON Auto swing T emp. setting COOL 1 3 6 9 T est run LO cool HI cool HI fan LO fan OFF Auto swing s.
3 Mode selection switch Mode switch controls the fan motor speed. Cooling speed or fan speed. <1> <2> <3> <4> <5> When set to "H I fan", fan motor runs at high speed to blow out strong air . When set to "LO fan", fan motor runs at low speed to blow out gentle air .
4 COOL 1 3 6 9 T est run.
Maintenance 5 NOTE: Always unplug the air conditioner before servicing or moving it. When dirt accumulates on air filter , air circulation will be blocked, which causes poor cooling. It is advisable to clean air filter every two weeks for longer operation.
6 Disposal of condensate Cautions The drain hole on the bottom of the air conditioner will be clogged by a rubber stopper to make the condensate in the bottom tray be spattered onto the condensation to raise efficiency of heat exchange. If the spattering sound disturbs you, you can adopt the method illustrated below .
Maintenance Don't be exposed to cold air for a long time. Keep heat source away from air conditioner . After unit stops, don't restart it until 3 min. have elapsed. 7 Avoid opening door and window unless necessary . Use curtain or blind Direct sunlight may reduce cooling effect, always use window curtain.
8 Cautions Don't hang clothes in the vicinity of air inlet. This will decrease cooling effect and cause abnormal operation. T emperature should be set properly when there are infant, child, the aged or disabled in room. Before operating mode selection switch, check if the air inlet or outlet have been blocked.
9 T r ouble Shooting Phenomenon Check the unit Resolution Doesn't work Is plug firmly inserted? Does fuse get burned? Is there power? Readjust power supply or replace fuse. No cool air or poor cooling Readjust the thermostat. Is thermostat switch wrongly adjusted? Is direct sunlight in the room? Use curtain or blind.
Installa tion instr uction 1. Select position where the structure is firm. 2. Select position where the air inlet and outlet are smooth without obstacles. 3. Select position where the cooled air can be blown to every corner . 4. Select position where there's no direct sunlight.
1 1 Fig.2 Rubber stopper Condenser Fig.1 Thickness of the wall Iron support A B A B 1. Cut a wall hole or a window hole (see Fig.1). 2. Fix the iron support in a firm place with expansible screws. 3. T ake the air conditioner and its attach- ments out from the packing carton.
12 8. Chink the wall and window with soft sponges or rubber bits in order to refrain from outside noises coming in or cooling air going out. 9. Air conditioner being fixed,insert the power plug in the.
BLOCK BLOCK 7363749 B BL S M R BL BL TERMINAL COMP. CAPACITOR BL M M R FAN MOTOR R Y R SYNCHROMOTOR R OR PROTECTOR C L C THERMOSTAT B FAN CAPACITOR COMP.
sales office With 3 years warranty on all air- conditioner compressors, you have peace of mind from the date of purchase.
An important point after buying a device Haier HW-09CV03 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HW-09CV03 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HW-09CV03 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HW-09CV03 you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HW-09CV03 will certainly help you make a decision on the purchase.
If you already are a holder of Haier HW-09CV03, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HW-09CV03.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HW-09CV03. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HW-09CV03 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
