Instruction/ maintenance manual of the product ADC 660P American Dynamics
Go to page of 19
Hi-Res. B/W camera instruction manual ADC 660N ADC 660P Version: Rev. A Part Number 8200-0839-01.
Notice To prevent fire or shock hazard, do not expose the unit to rain or moisture. The symbol is intended to alert the user to the presence of im portant operating and maintenance (servicing) instructions in the literature acc ompanying the unit.
Caution This installation should be made by a qualified service person and should conform to all local and national electrical and mechanical codes..
PRECAUTIONS 1. Do not a ttempt t o disass emble th e camera. In order to prevent elec tric shock, do not rem ove screws or cover. There are no user-serviceable part s inside. 2. Do not expos e the camera to ra in or moisture , or try to oper ate it in wet areas.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 5 Copyright ©2007 Sensormatic El ectronics Corporation. Product specifications subject t o change without notice. Certai n product names mentioned herein may be trade names and/or registered trademark s of other companies.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 6 I. CONNECTOR S AND CONT ROLS ................... ......... .......... ........... ......... ............ ......... ... 7 1. V IDEO O UTPUT C O NNECTOR (BNC) .
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 7 I. CONNECTORS AND CONTROLS 1. Video Out put Con nector ( BNC) 1.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 8 This terminal accepts 12 VDC or 24 VAC. Power Requirement : Maximum 200 mA (12 VDC), Maximum 100 mA (24 VAC). Recommended Power Supply : Minimum 500 mA (12 VD C); Minimum 300 mA (24 VAC).
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 9 When using a DC dr ive lens, the ALC/ELC D IP #1 must be s et to t he ALC (OFF) position.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 10 6. ALC/ ELC Select Switch (EE /ELC is ON ; ALC/AI is OFF) This switch is used to select EE (electronic exposure)/ELC (ele ct ronic light control) mode or AI (Auto Iris lens)/ALC (automatic light control) mode.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 11 7. AGC ON/O FF Switc h This switch is prov ided for th e AGC circuit. The AGC circuit in corporated into the camera boosts the sensitivity automatically when the scene illu mination is insufficient.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 12 1. While observing the vide o output signals from both cameras on an oscilloscope, turn camer a A's V-phase control (on back of camer a) until vertical sync from both cameras is in p hase.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 13 11. ALC Lev el Adjust ment Pot entiomet er for DC Drive Lens This potentiometer is used only if the camera is fitted with a DC drive Auto Iris lens. It is used to control the amount of light striking the CCD imag e sensor.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 14 Monitor Screen LEVEL Control Direction To increase the brightness Clockwise To decrease the brightness Counterclockwise 12.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 15.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 16 14. C Mount Ad aptor Ring The C-mount adaptor ring i s used only if a C-mount lens i s used on the camera. If a CS- mount lens is used, the adaptor is not necess ary.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 17 II. EXAMPLES OF CONNECTIONS 1. Simplest : One monitor syst em with one ca mera 2.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 18 III. DIMENSIONS.
Hi-Res. B/W camera instruction manual ADC 660N and ADC 660P ___________________ ______________ 19 IV. SPECIFICATIONS MODEL ADC660N ADC660P TV SYSTEM EIA CCIR EFFECTIVE PIXELS 768(H) X 494(V) 752(H) X .
An important point after buying a device American Dynamics ADC 660P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Dynamics ADC 660P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Dynamics ADC 660P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Dynamics ADC 660P you will learn all the available features of the product, as well as information on its operation. The information that you get American Dynamics ADC 660P will certainly help you make a decision on the purchase.
If you already are a holder of American Dynamics ADC 660P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Dynamics ADC 660P.
However, one of the most important roles played by the user manual is to help in solving problems with American Dynamics ADC 660P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Dynamics ADC 660P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
