Instruction/ maintenance manual of the product HSU-22LE03 Haier
Go to page of 18
Please read this operation manual before using the air conditioner. SPLIT TYPE ROOM AIR CONDITIONER OPERA TION MANUAL HSU-09LE03 HSU-12LE03 HSU-18LE03 HSU-22LE03 0010562346.
1 2-4 5-12 13-15 16 Contents Cautions Parts and functions Operation Maintenance Trouble shooting.
Maximum: D.B 1 10.The appliance must be installed on strong enough supporter. 9.Young children should be supervised ensure that they do not play with the appliance. 8. The appliance is not intended to use by young children or infirm persons without supervision.
2 Parts and Functions Indoor Unit Inlet grille Air filter Vertical flap Power indicator Timer mode indicator Operation mode indicator Remote signal receiver Emergency switch(manual) Test running switch(manual) Use remote controller to adjust up and down air flow.
FAN DRY COOL AUTO 3 Parts and Functions Operation 1. Mode display 2. SWING display 3. FAN SPEED display 4. SLEEP display 5. LOCK display 6. SIGNAL SENDING 7. TIMER OFF display 8. TIMER ON display 9. CLOCK display 10. TEMP display 11. POWER ON/OFF Used for unit start and stop.
4 AUTO LO MED HI Parts and Functions Operation Buttons and display of the remote controller. like the following figure: If the unit which you purchased has healthy function, Remote controller should B.
ÇëÑ¡ÓÃͬһƷÅÆÁ½½Ú 7# µç³Ø,³¤Ê±¼ä²»ÓÃʱ,Ϊ ·Àֹ©ҹÇ뽫µç³ØÈ¡ ³ö¡£ ÔÚʹÓÃÖÐÈçÓöÒì³£,Çë ½«µç³ØÈ¡³ö,6·ÖÖÓºóÔ.
(4) Unit stop (1) Unit start 6 Auto run, Fan operation Enjoy yourself by just a gentle press. Operation mode changes as follows: Press ON/OFF button, unit starts. Previous operation status appears on display. (Not Timer setting) Power indicator on indoor unit lights up.
Press MODE button. For each press, operation Recommendations: 7 Operation COOL,HEA T and DR Y operation Use COOL in summer. Use DRY in spring, autumn and in damp climate. (1) Unit start mode changes as follows: Press ON/OFF button, unit starts. Previous operation status appears on display.
8 Operation (5) Air flow direction adjustment After operation mode is selected, vertical flap will open automatically according to the mode. Referring to the Fig. COOL COOL About 10 o About 10 o better set a temp. difference of 3-5 o C between indoor and outdoor temp.
9 Operation TIMER Operation You can let unit start or stop automatically at following times: Before you wake up in the morning, or get back from outside or after you fall asleep at night. Set Clock correctly before starting Timer operation TIMER ON/OFF Power indicator on indoor unit lights up.
TIMER ON-OFF 10 Operation TIMER ON-OFF T o cancel TIMER mode Power indicator on indoor unit lights up. (1)After unit start, select your desired operation mode Operation mode will be displayed on LCD.
Emergency Operation: Pi Pi 1 1 Emergency operation and test operation Operation Carry out this operation only when the remote controller is defective or lost. When the emergency operation switch is pressed, a" Pi "sound starts once, which means the start of this operation.
12 Comfortable SLEEP Operation In COOL mode sleep in selected mode. Before going to bed at night, you can simply press the SLEEP button and unit will bring you a sound One hour after SLEEP mode starts, temp. will become 1 o C higher than temp. setting.
13 Maintenance Different models have different appearance Cleaning of unit casing Cleaning of remote controller Cleaning of air filter Cut off power supply before cleaning unit casing with soft cloth. In case of heavy stain, clean it with neutral detergent.
Replacement of Air Purifying Filter NO TE: Please replace the air Purifying Filter when color of the filter become same levle of sample attached in the indoor unit. 14 1.Open the lnlet Grille 2.Detach the standard air filter 3.Detach the Air Purifying Filter 4.
15 Maintenance Better use of air conditioner Proper room temperature. Cleaning of the air filter. Effective use of the timer. Closing of doors and windows during operation Never fail to observe the followings Do not sprinkle water over the unit. Do not block the inlet or outlet.
16 T rouble shooting Before asking for service, check the following first. Normal Performance inspection Noise is heard Phenomenon Cause or check points The system does not restart immediately. Smells are generated. Mist or steam are blown out. Multiple check Does not work at all.
An important point after buying a device Haier HSU-22LE03 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HSU-22LE03 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HSU-22LE03 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HSU-22LE03 you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HSU-22LE03 will certainly help you make a decision on the purchase.
If you already are a holder of Haier HSU-22LE03, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HSU-22LE03.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HSU-22LE03. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HSU-22LE03 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
