Instruction/ maintenance manual of the product AD2033 American Dynamics
Go to page of 24
2033 Auxiliary Follower The 2033 Auxiliary Follower can be used with all American Dynamics Matrix Switching Systems employing control code(s). The 2033 Auxiliary Follower is used to provide a relay closure when an auxiliary or alarm command has been issued.
The software/firmware furnished with this equipment is confidential to and is copyrighted by SENSORMATIC ELECTRONICS CORPORATION. It is not to be copied or disclosed in any manner without the express written consent of SENSORMATIC. The software/firmware is furnished to the purchaser under a license for use on a single system.
The installation of this product should be made by qualified service personnel and should conform to all local codes. QA301D ! W W W W A A A A R R R R N N N N II I I N N N N G G G G To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
.
T able of Contents Description ............................................................ 1 Features ................................................................. 1 Installation ............................................................ 2 Mounting .
.
DESCRIPTION The 2033 Auxiliary Follower provides relay closures which correspond to an auxiliary call for a selected or switched camera. The auxiliary function(s) (either 1, 2, or 3) can be activated eithere manually from a keyboard, from a system tour, or from an alarm.
INSTALLATION The Universal cabinet of a 2033 Auxiliary Follower may be surface or rack mounted in any convenient location with adequate ventilation. For proper ventilation allow at least three feet (1m) form the rear of the racks to any wall and one EIA rack height (1 3/4 inches) between units.
.
.
CONNECTIONS Relay Connections Two groups (GROUP 1 and GROUP 2) of four 12-pin connectors are provided on the rear panel. Each group provides connection for double pole relays. The two groups provide 32 pairs of relay closures. Relay contact ratings are 24 VAC, 0.
Data Line Connections (1995 or 1996) A DATA LINE is connected from the DATA LINE OUT BNC on a Matrix Bay to the DATA LINE IN BNC on the rear panel of the Auxiliary/Alarm Follower. (Older 1995 systems used the term LAN IN/OUT). Use a good grade RG- 59 video cable (Belden 8241 or equivalent).
OPERATON After completing the Data Line (or Code) connections, plug in the power cord. When the 2033 receives a valid code through the Data Line inputs, the green Data Line LED illuminates. If the green code LED is flickering, the code lines may be backwards.
.
APPENDIX.
.
2033 AUXILIARY FOLLOWER DATA LINE IN OUT 1 DATA PWR DATALINE/LAN FROM CPU (1995,1996) DATA LINE/LAN OUT to Additional 2033's, Bays, or 75-ohm Terminator Selects Auxiliary # and Camera Group # to .
.
TYPICAL SYSTEM CONNECTIONS DATALINE OUT to additional 2033's or 75-ohm terminator 2033 AUXILIARY FOLLOWER RS232 PORTS MONITORS 12 3 4 5 123 ALARMS RELAY KEYBOARDS 23 4 5 2468 1 0 1 2 1 4 1 .
.
2033 AUXILIARY FOLLOWER TYPICAL SYSTEM CONNECTIONS GROUP 1 GROUP 2 DATA LINE IN OUT 1 DATA PWR ABCDEF ON OFF ABCDEF ON OFF ABCDEF ON OFF ABCDEF ON OFF SELECT A B A B A B A B A B A B A B A B A B A B A .
TYPICAL SYSTEM CONNECTIONS 2033 AUXILIARY FOLLOWER with 1650 2033: CAMERAS 1 - 64 B W S B W S GROUP 1 GROUP 2 DATA LINE IN OUT 1 DATA PWR ABCDEF ON OFF ABCDEF ON OFF ABCDEF ON OFF ABCDEF ON OFF SELECT.
DECL ARA TION OF CONFORMITY According to ISO/IEC G uide 22 and EN45014 Manufacturer’s N ame: Sensormati c Elect ronics Corporation Manufacturer’s A ddress: 1 B l ue Hill Plaza 2 nd Floor Pearl Riv.
Sensormatic Video Systems Divsion One Blue Hill Plaza Pearl River, New York 10965 (845) 624-7600 Technical Support Center: 800-442-2225 FAX: (845) 624-7685 8000-1815-01, Revision A December, 2000 Printed in USA SPECIFICATIONS Electrical Ratings: AD2033 120 VAC, 50/60Hz, 15 W AD2033-1 230 VAC, 50/60Hz, 125 mA Relay Contact Ratings: 0.
An important point after buying a device American Dynamics AD2033 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Dynamics AD2033 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Dynamics AD2033 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Dynamics AD2033 you will learn all the available features of the product, as well as information on its operation. The information that you get American Dynamics AD2033 will certainly help you make a decision on the purchase.
If you already are a holder of American Dynamics AD2033, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Dynamics AD2033.
However, one of the most important roles played by the user manual is to help in solving problems with American Dynamics AD2033. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Dynamics AD2033 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
