Instruction/ maintenance manual of the product HDW9-AFM Haier
Go to page of 12
Domestic Dishwasher HDW9-AFM GB Code:0120504951.
.
Safety Is a Good Habit to Get Into Close-up View (Control Panel) A B C ON-OFF Light ON-OFF Button Handle For Opening Door D E A B C Knob For Selecting Cycle Heater indicator Light NOTICE Carefully rea.
Close-up View (Interior) A B C D Upper Rack Rack Height Adjustor Lower Rack E F G Washing Filter Bottom Spray Arm Detergent and Rinse Aid Dispenser Technical characteristics Width 45 cm Depth 60 cm Height 85 cm Capacity 9 standard place settings Mains water pressure 0.
Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle Table".
Loading the Dishwasher Lower Rack Upper Rack Load for 9 Standard Settings fig.A fig.B Before placing the dishes in the dishwasher, remove the large food particle to prevent the filter from becoming clogged, which results in reduced performance.
Starting the Appliance Starting a wash cycle - Make sure that the plug for the appliance is inserted into the wall socket. - Make sure that the water supply is turned on to full pressure. - Load the dishwasher (see the section entitled, "Loading the Dishwasher").
Wash Cycle Table Cycle Cycle Selection Information Description of Cycle Detergent Rinse Aid Intensive Wash Glassware Soak Very dirty dishes, pots and pans. (not to be used with delicate items) Economic, fast cycle to be used for items which are sen- sitive to higher.
- It is important to try and run the dishwasher when it is fully loaded to save on energy. In order to prevent odors from form- ing and food from caking onto the dishes, you can run the soak cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are.
Cleaning and Special Maintenance Filter Assembly For the best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle.
Installation Positioning the Appliance Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.
Diagram Installation.
An important point after buying a device Haier HDW9-AFM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier HDW9-AFM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier HDW9-AFM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier HDW9-AFM you will learn all the available features of the product, as well as information on its operation. The information that you get Haier HDW9-AFM will certainly help you make a decision on the purchase.
If you already are a holder of Haier HDW9-AFM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier HDW9-AFM.
However, one of the most important roles played by the user manual is to help in solving problems with Haier HDW9-AFM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier HDW9-AFM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
