Instruction/ maintenance manual of the product DW12-PFE2 ME Haier
Go to page of 28
Dishwasher DW12-PFE2 Instructions for Use en 0120505844 DW12-PFE2 ME.
1 Index Safet y i n fo rm ati o n Inst allat ion Getting to know your dishwasher How t o fill t he s alt How t o fill r i nse a i d How t o fill t he d e te rgent di spe nser Not suitable for the dishwasher Arrangi ng crockery, glasses, etc.
2 Safet y in form atio n At t ime o f deliver y C heck p ac ka gi ng an d di sh w as he r i mmed i at el y f or s i gns of tr an spo rt dam ag e. I f t he ap pl i ance i s damaged, do not put it into use but contact your supplier or customer service without delay.
3 If yo ur family in clud es children The appliance is not intended for use by young children or infirm persons without supervision. Young childr en should be supervised t o ensure that they do not play with the appliance . Keep detergent s out of the reach of children, who must also be kept away from the dishwas her when it is open.
4 Pos iti onin g the a pplia nce Positionin g t he appli ance in the desired loca tion. T h e bac k s hould r est against the wall behind it, and the side s, along the adja cent c abi net s or wall.
5 E le ctri cal C onnec tio n A fter making sur e that the voltage and f r equency values for the current in the home corr esp ond to those on the rating pl ate ( locate d on t he stainl ess steel inn.
6 Getti n g to kn ow yo ur dish wash er Cl ose-up v iew (c ontrol panel ) " 1/2 " Indicator Low Salt Indicator Time-remaining Indicator F G H I J A B C D E ON-OFF Button " 1/2 " Bu.
7 Important To prevent the formation of rust, load the salt just before beginning a wash cycle. Salt The hardness of t he water v aries f rom place t o plac e. I f hard water is use d in the dishw asher , deposits will form on the dishes and utensils.
8 Adju stin g salt consu mptio n The dishwasher is designed to allow f or adjust in g the amoun t of salt consumed based on the hardness of the water used. This is intended to op t imize an d cus t omize t he l ev el of s alt consumption so that it rem ains at a minimum.
5 4 9 R inse aid T his product m akes dishes sparkle and helps them to dry without spotting. The dispenser is loca ted on the inside panel of the door . L oading the rinse aid R e ga rdl ess o f t he t ype of det erg ent di sp enser i n st al le d o n yo ur appliance, y ou mus t proc eed as indi cated below when load ing t he rins e aid.
1 0 N o t suitab le for t he d ishw asher Wh at you sho u ld no t p ut into t he d ishwash er C utler y and tab leware m anuf a c t ur ed in who le o r par t f r om wood .T hey bec om e faded and uns ightly in appe arance. Further mor e,the adhe sives t hat are us ed are not s uitable for t he temper ature t hat occur inside the dishwasher.
11 Arran gin g cro ckery, g lasses , et c. in the d ish wash er Bef ore pl acin g the d ishes i n the dishwash er, r em ove lar ger f ood p artic les t o pr event the f il t er fr om be- coming clogged, which results in reduced performance.
12 The upp er r ack is des igned to hold m ore delic ate and lig hter di shw are, such as g lass es, cups and sau cer s, pl ates , s ma ll bowls and shallow pans ( as long as t hey are not too dir ty).
1 3 P ro gramme o verview Wash programme Type of crokery e.g. china, pots/ pan s, cutiery, glasses, etc Amount of food remains Description of cycle Condi- tion of food remains Pre-wash with hot water. Extended wash at 70°C. Rinses with cold water. Rinse with hot water.
1 4 Delayed Start Detergent Extended Wash Prewash Rinse Aid Duration in minutes Energy consump- tion in kWh Water consump- tion in litres 25g 15g 25g 15g 25g 20g 15g 10g 15g 10g 5g 5g 5g 5g 5g 5g * EN50242 test with rinse aid setting 5 112 94 102 90 162 142 92 82 31 29 12 12 1.
15 Wash ing dishes Pro gram me selectio n The most appropriate programme c an be ident ified by comparing the t ype of crockery, cutl ery, etc., as well as the amount and condition of food rem ains, with the details contained in t he wash cycl e table.
16 End of pro gramm e Six beeps will indica t e t hat t he wash cycle has finished and all the programme indicators light. S witching the dishwasher OFF S everal minutes aft er the programm e has ended: Set main switch “A” to OFF . Open the door .
17 Cancelling or mo dif ying a cycle A cycle that is und erway can be modif ied if it has only been runnin g for a short time. O therwise, the deter gent may have already been used, and the appliance may hav e already dr ained the wash wat er .
18 Ho w to keep you r dish washer i n shap e Aft er Every Wash Af t er every wash, turn off t he water supply t he appliance an d leave t he door sligh t ly ajar so t hat m ois t ure and odors ar e not trapped inside. Remo ve t he plug Before cleaning or per forming maintenance, always rem ove the plug from the socket.
19 Car e a nd mai nt ena nce Dishw asher salt Che ck t he LOW S ALT indi cat or “ G ” .T op up with salt, if required. Regular ins pection and maint enan ce of y our applia nce helps t o pre vent pr oblem s fr om o ccurr ing.T his saves time and aggravat ion.
20 Ins pe ct the no zzle s in t he spr ay arm s for blo cke d hole s due to remnants of food. If necessary, pull t he lower ar m “ 1 1 ” upwards an d lift it off. Unscrew the upper sp ray arm “ 1 0 ”. Clean both spray arm s under running water.
2 1 R esolvi n g min or problem s yourself E xperience has sh own t hat you can r eso lve m ost problem s t hat rise during normal dail y usage yours elf , withou t having t o call out a serv ice engin eer.Not only does this save cos ts,but it als o means that the appli anc e is av aila ble for us e agai n t hat m uc h s ooner .
22 When the pr og ram me i ndicat ors “ J1,J 3,J 4” blink. Have you ch ecked w het her: the drain hose is cr imped or bent. the drain hose is too high. When t he progr amme indi cators “ J1, J2,J6” b link. Have you ch ecked w het her: t he drain hose is too low.
23 Water remains i nside appliance aft er progr amme has end ed Blockage or kind in drainage hose . Pump is jammed. Filters are blocked. The programm e is still running. W ait for the programm e t o end . . .. during wa shi ng Unusual amo unt of foam is cr eased N ormal wash ing up liquid has been poured int o the rinse-aid container.
24 Not enough detergent was added to dispenser . Deter ge n t has i nsuf fcient blea c h ing pr op ertie s. Use a det ergent cont aining a chem ic al b leachi n g agent . P last ic items are di scoloured N ot enough detergent was added to dispenser compartment.
2 5 T ech nical d ata 12 stand ard place se ttings Width Dep th Height Capacity Mains water pressure Power vo l tage Total absorb ed power 60 c m 60 cm 85 cm 0.03-0.6M Pa 220-240V ~ 50Hz 1950W Maximu m current int ensity 10A Imp o rtant in formatio n Not es o n waste disp osal O ld appliances still ha ve some residual v alue.
26 Gen eral in fo rmat ion Measur e s must be taken to ensure that built-under and built-in units that are subse quently re-sited as free-standing appliances cannot topple over. This can be achieved by bolting t he dishwasher to the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.
A: Wiring box B: Door switch C: Water level switch D: Drain pump motor E: Dispenser F: Softener valve G: O ve rfl ow s wi tch H1: Inlet valve H2: Inlet valve (Aquastop) I: Washing pump motor J: Temper.
An important point after buying a device Haier DW12-PFE2 ME (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier DW12-PFE2 ME yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier DW12-PFE2 ME - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier DW12-PFE2 ME you will learn all the available features of the product, as well as information on its operation. The information that you get Haier DW12-PFE2 ME will certainly help you make a decision on the purchase.
If you already are a holder of Haier DW12-PFE2 ME, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier DW12-PFE2 ME.
However, one of the most important roles played by the user manual is to help in solving problems with Haier DW12-PFE2 ME. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier DW12-PFE2 ME along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
