Instruction/ maintenance manual of the product DW12-PE1ME Haier
Go to page of 12
.
Index Safety information Installation Getting to know your dishwasher How to fill the salt How to fill rinse aid How to fill the detergent dispenser Not suitable for the dishwasher Arranging crockery, glasses, etc.
1 If your family includes children Warning Safety of Children when disposing of your old appliance.Some packaging materials can be dan- gerous for children.
Installation Cold water connection Connect the water supply hose to a water outlet tap, making sure that it is fastened tightly in place (see fig.A). Make sure the rubber washer is seated firmly in the bottom of the connector.
Getting to know your dishwasher Close-up view (control panel) Dishwasher interior Important To prevent the formation of rust, load the salt just before beginning a wash cycle. Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils.
How to fill the detergent dispenser Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Programme overview".
Arranging crockery, glasses, etc. in the dishwasher Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they are soaked before washed.
Programme overview Wash progra- mme Type of crokery e.g.china, pots/pans, cutiery, glasses, etc Amount of food remains Description of cycle Condi- tion of food remains Pre-wash with hot water. Extended wash at 70 ° C. Rinses with cold water. Rinse with hot water.
Washing dishes Programme selection The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.
Resolving minor problems yourself Experience has shown that you can resolve most problems that rise during normal daily usage yourself, without having to call out a service engineer.Not only does this save costs,but it also means that the appliance is available for use again that much sooner.
Detergent does not have a sufficient bleaching effect. Washing temperature was set too low. Tea stains or traces of lipstick have not been completely removed Cutlery is not sufficiently rustproof. Salt content in washing water is too high. Traces of rust on cutlery Unsuitable detergent was used.
Technical data 12 standard place settings Width Depth Height Capacity Mains water pressure Power voltage Total absorbed power 60 cm 60 cm 85 cm 0.03-0.
An important point after buying a device Haier DW12-PE1ME (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier DW12-PE1ME yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier DW12-PE1ME - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier DW12-PE1ME you will learn all the available features of the product, as well as information on its operation. The information that you get Haier DW12-PE1ME will certainly help you make a decision on the purchase.
If you already are a holder of Haier DW12-PE1ME, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier DW12-PE1ME.
However, one of the most important roles played by the user manual is to help in solving problems with Haier DW12-PE1ME. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier DW12-PE1ME along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center