Instruction/ maintenance manual of the product DW12-LBE Haier
Go to page of 12
Dishwasher DW12-LBE Instructions for Use 012050 en.
Safety Is a Good Habit to Develop Close-up View (Control Panel) NOTICE Carefully read the instructions contained in this manual, as they provide important information which is essential to safe and proper installation, use and maintenance of the appliance.
.2. Close-up View (Interior) A B C D E Upper Rack Rack Height Adjustor Top Spray Arm Lower Rack F G H I Washing Filter Bottom Spray Arm Detergent and Rinse Aid Dispenser Third Sprayer Specifications Width Depth Height Capacity Mains Water Pressure Power Voltage Total Absorber Power Salt Container Cap GB 60cm 58cm 82cm 12 standard place settings 0.
.3. Salt Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.
.4. Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle Table.
.5. Loading the Dishwasher Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter from becoming clogged, which re- sults in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they are soaked before washed.
Starting the Appliance Starting a wash cycle After having completed all of the installation steps in the preced- ing paragraphs, turn on the water all the way and press the ON- OFF button (A) located on the control pannel. The appliance is on.
.7. - It is important to try and run the dishwasher when it is fully loaded in order to save on energy. To prevent odours from form- ing and food from caking onto the dishes, you can run the soak cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are.
.8. Wash Cycle Table GB Cycle Selection Information Description of Cycle Detergent Rinse Aid Normal dirty dishes, pots and pans. standard daily cycle. Very dirty dishes, pots and pans. (not to be used with deli- cate items) Pre-wash with cold water. Extended wash at 55 ° C.
.9. GB Cleaning and Special Maintenance Filter Assembly For best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle.
Fig.2 Fig.1 .10. Installation Drain Hose Connection Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. Use the special plastic support that comes with the appliance (see Fig.
A.Wiring box B.Door switch C.W ater level switch D.Drain motor E.Overflow switch F .Half wash switch G.Softer valve H.Dispenser valve I.Aquastop inlet valve J.W ashing motor K.T emperature limiter L.Heater M.Relay N.Sensor temperature O.Salt missing switch P .
An important point after buying a device Haier DW12-LBE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier DW12-LBE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier DW12-LBE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier DW12-LBE you will learn all the available features of the product, as well as information on its operation. The information that you get Haier DW12-LBE will certainly help you make a decision on the purchase.
If you already are a holder of Haier DW12-LBE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier DW12-LBE.
However, one of the most important roles played by the user manual is to help in solving problems with Haier DW12-LBE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier DW12-LBE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
