Instruction/ maintenance manual of the product DW12-HFM Haier
Go to page of 12
DW12-HFM DW12-HFM ME DW12-HFM SS 0120503790 GB NL DE FR IT ES PT.
Safety Is a Good Habit to Get Into Close-up View (control panel) A B C ON-OFF light ON-OFF button Handle for opening door D E F G "Eco" button A FE Low salt indicator light "1/2" button BC D G Knob for selecting cycle - Do not touch the heating element during or after a wash cycle.
Close-up View (Interior) A B C D Upper Rack Rack Height Adjustor Top Spray Arm Lower Rack E F G H I Washing Filter Bottom Spray Arm Detergent and Rinse Aid Dispenser Salt Container Cap Technical characteristics Width 60 cm Depth 60 cm Height 85 cm Capacity 12 standard place settings Mains water pressure 0.
Salt Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.
Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle Table".
Loading the Dishwasher .5. GB Lower Rack Upper Rack Load for 12 Standard Settings fig.A fig.B 2 1 3 4 fig.C Before placing the dishes in the dishwasher, remove the large food particle to prevent the filter from becoming clogged, which results in reduced performance.
Starting the Appliance Starting a wash cycle... - Make sure that the plug for the appliance is inserted into the wall socket. - Make sure that the water supply is turned on to full pressure. - Load the dishwasher (see the section entitled, "Loading the Dishwasher").
Wash Cycle Table .7. GB Cycle Eco Button Cycle Selection Information Description of Cycle Deter- gent Rinse Aid Intensive Wash Intensive Wash Normal Wash Rinse Glassware Soak Very dirty dishes, pots and pans (not to be used with delicate items).
- It is important to try and run the dishwasher when it is fully loaded in order to save on energy. In order to prevent odours from forming and food from caking onto the dishes, you can run the soak cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are.
Cleaning and Special Maintenance Filter Assembly For best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle.
Installation Positioning the Appliance Positioning the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.
Diagram Installation.
An important point after buying a device Haier DW12-HFM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier DW12-HFM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier DW12-HFM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier DW12-HFM you will learn all the available features of the product, as well as information on its operation. The information that you get Haier DW12-HFM will certainly help you make a decision on the purchase.
If you already are a holder of Haier DW12-HFM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier DW12-HFM.
However, one of the most important roles played by the user manual is to help in solving problems with Haier DW12-HFM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier DW12-HFM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
