Instruction/ maintenance manual of the product DW12-EBM 4S Haier
Go to page of 8
0120503977 GB Domestic Dishwasher DW12-EBM 4S DW12-EBM 3S DW12-EBM 1S.
Safety Is Very Important Close-up View (Control Panel) Close-up View (Interior) A B C D E Upper Rack Rack Height Adjustor Top Sprayer Arm Lower Rack F G H I J Washing Filter Bottom Sprayer Arm Detergent and Rinse Aid Dispenser Technical Characteristics Width 60 cm Depth 58 cm Height 82 cm Capacity 12 standard place settings Mains water pressure 0.
Salt Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water.
Loading the Dishwasher Lower Rack Upper Rack Load for 12 Standard Settings ( for DW12-EBM3S/1S ) Turning on the Appliance Starting a wash cycle - Make sure that the plug for the appliance is inserted into the wall socket. - Make sure that the water supply is turned on to full pressure.
- It is important to try and run the dishwasher when it is fully loaded to save on energy. In order to prevent odors from form- ing and food from caking onto the dishes, you can run the hold cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are.
Wash Cycle Table Cycle Eco Button Cycle Selection Information Description of Cycle Deter- gent Rinse Aid Intensive Wash Intensive Wash Normal Wash Rinse Glassware Soak Very dirty dishes, pots and pans (not to be used with delicate items). Very dirty dishes, pots and pans.
Cleaning and Special Maintenance Filter Assembly For best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle.
Installation Diagram 1>. DW12-EBM 4S 2>. DW12-EBM 3S Diagram 3>. DW12-EBM1S WR 220-240V~ 50Hz N L ISS 2 4(2) 2(1) 1(2) 3(1) LS B10 B9 A7 A6 3 2 1 TS.58 TS.50 8 A8 D-Ed B5 B3 B2 B3 7 3 4 B6 B7 B8 A3 n.a. B1 B4 CL CL CL 3 1 IAQS CL a b CL 1 n.a.
An important point after buying a device Haier DW12-EBM 4S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier DW12-EBM 4S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier DW12-EBM 4S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier DW12-EBM 4S you will learn all the available features of the product, as well as information on its operation. The information that you get Haier DW12-EBM 4S will certainly help you make a decision on the purchase.
If you already are a holder of Haier DW12-EBM 4S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier DW12-EBM 4S.
However, one of the most important roles played by the user manual is to help in solving problems with Haier DW12-EBM 4S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier DW12-EBM 4S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
