Instruction/ maintenance manual of the product CRDE400AW Haier
Go to page of 25
Model # RDE400AW/R,RDE200AW,CRDE400AW/R,CRDE200AW C y c l e s V e r y D a m p D r y C o o l d o w n C y c l e c o m p l e t e d E x t e n d t r u m b l e L o u d e r S o f t e r O f f C y c l e S i g .
2. Do not dry articles that have been previously cleaned in,washed in, soaked in,or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode. 3. Do not allow children to play on or in the appliance.
16. This dryer must be properly installed in accordance with the installation instructions before it is used. See grounding instructions in the installations sections. 17. Proper grounding must be ensured to reduce the risk of electric shock and force.
3 T ables Of Contents PAGE Safety Instructions ............................................................................ 1 OPERATING INSTRUCTIONS ............................................................ 13-22 ...................................
4 INST ALLA TION INSTRUCTIONS Phillips head and flathead screwdrivers Channel-lock adjustable pliers 1/2 inch open end wrench Carpenter s level Measuring tape (12ft. Min.) Duct tape Rigid or flexible metal 4 inch (10.2 cm) duct Vent hood 1. Remove all packaging material.
5 Exhaust System Connections Requirements and Instructions 1. Do not use plastic flexible duct to exhaustthe dryer. Excessive lint can build up inside system and create a fire hazard and restrict air flow. Restricted airexhaust flow will increase dryer times.
6 Materials English Although vertical orientation of the exhaust system is acceptable. Certain extenuating circumstances could affect the performance of the dryer: 1. Only rigid metal duct work should be used. 2. Venting vertically through a roof may expose the exhaust system to down drafts causing an increase in vent restriction.
7 Do Not Install Your Dryer: In an area exposed to dripping water or outside weather conditions. In an area where it will come in contact with curtains, thick carpet, or anything that will obstruct the flow of combustion and ventilation air. On carpet.
8 Correct Incorrect Correct Incorrect Correct Incorrect English.
9 Electrical Connections Requirements and Instructions 1. This appliance must be properly grounded. Electrical shock can result if the dryer is not properly grounded. Follow the instructions in this manual for Proper grounding. 2. Do not use an extension cord with this dryer.
10 1. Remove the screws securing the terminal block access cover and the strain relief mounting bracket located on the back of the dryer in the upper corner. 2. Install a U.L. approved strain relief into the power cord entry hole of the mounting bracket.
English 11 4- W ire Cord Connections 1. Remove the screws securing the terminal block access cover and the strain relief mounting bracket located on the back of the dryer upper corner . 2. Install a UL approved strain relief into the power cord entry hole of the mounting bracket .
Caution: Label all wires prior to disconnection, when servicing controls. Wiring errors can cause improper operation and be dangerous. Check unit for proper operation after servicing. Warning: Discard or destroy the carton and plastic bags after the dryer is unpacked.
Understanding the Control Panel OPERA TING INSTRUCTIONS 1 2 8 3 7 6 5 4 9 Power On/Off Button: (1) Start/Pause Button: (2) Press the button once to operate the dryer. Press the button once again to turn the dryer "OFF". Press this button once to start the dry process.
Timed/Cycles Button: (5) Cycles Button: (7) More Time & Less Time Button: (6) "Cycle" button will let you select your desired dry cycles. For your convenience, there are seven fabric care dry cycles programmed in this mode:Customized, Normal, Heavy , Cotton, Bulky Items, Permanent P ress and Delicate.
Function Light Indicator: The function "display light" indicates selected feature is "ON" or the cycle is about to begin. During the dry cycle, "flashing light" indicates current running program. Rapidly flashing light indicates that the dryer is not operating properly.
Auto Dry cycle and Timed Dry cycle Load clothes into dryer The appropriate load shall be 1/3 ~ 1/2 of the drum volume. Avoid too much load, for a certain space is needed to allow clothes free rotation for uniform and wrinkle- proof drying.
Various button initial status for "Normal program" 2. Press "Cycles" button to select a suitable full automatic cycle The Normal program will be automatically selected after powering on. If other full automatic program is desired, press "Auto-program Selection" button until corresponding indicator turns on.
After powering on, the clothes dryer automatically sets dryness at "Very", which means the normal drying time. If other drying time is desired, press "Sensor Dryness Level" button to select a shorter time.
Timed Dry cycle 1 7 4 6 2 5 Cycles Dry Cool down Cycle completed Extend tumble Customized On Off Wrinkle Care More Time Less Time Auto Dry Rack dry Timed Dry Time Remaining On/Off Power Pause Start Te m p Air Only(No Heat) High Medium Low Normal Heavy Cotton Delicate Bulky Items Louder Softer Signal Cycle Off Cycles Timed 3 2.
Other Features 2. Press "Timed/Cycles" button and select "Rack Dry" cycle 1. Press "Power On/Off" button to power on After powering on, press "Timed/Cycle" button to select "Rack Dry" program.
22 For best dr ying results, clean the lint filter before Do not overload the dryer. Balance the dryer load, evenly Throughout the dryer for the best results. Drying time depends on many variables: load size, type of fabric and moisture in it, heat and moisture in the room, electric voltage, length of the venting duct, etc.
23 Care and Cleaning Guide • Lint filter needs to be cleaned before and after each use for your unit to Operate at optimum efficiency. The filter can be slid out , by pulling on The tab located on the inside of the dryer door. The filter may be Washed or vacuumed.
24 Troubleshooting Dryer does not operate: Check if unit is plugged in. The plug may have come loose. Check if the electrical wall socket is the correct voltage. Check if the circuit breaker needs to be reset or if the fuse needs to be replaced. Check if the unit is in Off mode.
Full ONE Year Warranty For 12 months from the date of original retail purchase, Haier will repair or replace any par free of charge including labor that fails due to a defect in materials or workmanship.
An important point after buying a device Haier CRDE400AW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier CRDE400AW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier CRDE400AW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier CRDE400AW you will learn all the available features of the product, as well as information on its operation. The information that you get Haier CRDE400AW will certainly help you make a decision on the purchase.
If you already are a holder of Haier CRDE400AW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier CRDE400AW.
However, one of the most important roles played by the user manual is to help in solving problems with Haier CRDE400AW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier CRDE400AW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
