Instruction/ maintenance manual of the product 42EP24STV Haier
Go to page of 33
Please read this manual carefully and completely before operating t he unit, and retain this manual for future reference. PLASMA TV OWNER`S MANUAL MODELS: 42EP24STV.
2 Plasma TV THIS S YMBOL IN DICA TES T HA T H IGH V OL TAG E IS PRESENT INSIDE. IT IS D ANGEROUS TO MAKE A NY KIND O F C ONTAC T WITH A NY INSIDE PA RT OF THIS P RODUCT. WARNING : T o reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel.
Owner s Manual 3 IMPORT ANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1)Save these Instructions ---the safety and operating instructions should be retained for future reference.
4 Plasma TV SA VE THESE INSTRUCTIONS Thank you for using our Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. Model number serial number Date of purchase b.
Owner s Manual 5 Warning..............................................................2 Safety Instructions............................................ 3-4 Introduction Controls...........................................................6 Connection Options.
EXIT INPUT MENU Signal source input option Down/Up. Sel ct desired option on MENU or tune to the desired channel. e VOLUME Buttons MENU Button Power On/Off Button Remote Control Sensor illuminates red.
AC-INPUT DVI VGA L-AUDIO-R AV IN S-VIDEO VIDEO L-AUDIO-R AV OU T VIDEO AUDIO DVI IN AUDIO VGA IN COMPONENT IN Pr/Cr Pb/Cb Y L-AUDIO-R L R AUDIO OUT SWITCH VGA Input/Audio input DVD/DTV Input Connect a.
When using the remote control. Aim it towards the remote sensor on the TV. 3 2 1 8 Plasma TV Installing Batteries Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). Install two 1.
VIDEO INPUT POWER PC AUTO DVI MUTE EXIT AVC DISPLAY DNR MENU / LOCK CALENDAR CC RATING FREEZE SURROUND ARC ENTER SAVING SLEEP P.STD S.STD VOL+ VOL- Speaker u nit(X2) (2.
10 Plasma TV Do not leave a still picture from a VCR on the screen for a long If the 4:3 format is used, the fixed images on the sides of the screen may remain visible on the screen, if this format is used day after day . This is known as burn-in, it is uneven wear of the screen area.
Owner s Manual 11 How to connect Connect the audio and video cables from the external equipment's output jacks to the TV`s A V IN input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (V ideo = yellow , Audio Left = white, and Audio Right = red).
12 Plasma TV - T o watch digitally broadcast programs, purchase and connect a digital set-top box. Digital Set-top Box How to connect Use the COMPONENT (Y , Pb, Pr) IN jacks, VGA or DVI IN port for video connections, depending on your set-top box connections available.
Owner s Manual 13 How to connect 1. T o get the best picture quality , adjust the PC graphics card, if necessary. 2. Use the `s VGA IN or DVI (Digital Visual Interface) IN port for video connections, depending on your PC connector.
1 Face the PDP screen upside down on a clean blanket or a bracket and pay attention not to indent the casing. Lay the two speaker aside of the PDP . 2 .
Install the brace pole M4X8rom the front . 1 After put the brace pole to the stand, use the screw 8 M4x12 to fix it. 2 Take care not to touch the stand and the brace pole; 3 Fix the PMMA baffle with the screw 2 Install the PMMA Baffle After installing the brace pole(see figure below) baffle and put the baffle into the stand.
16 Plasma TV Turning on the TV just after installation. 1 . Connect power cord correctly . 2. Press the SWITCH button on back of the TV. At this moment, the TV is switched to standby mode. Press the POWER button on the remote control or button on the TV and then the TV will turn on.
Basic Function Operation Menu 1.Press MENU button to open the main menu. Press VOL+/- button to select PIC., SOU., ADJ., SYS. , FUN. or TIME menu. 2.Press CH+/- button to select submenu, and press VOL+/- button to increase/decrease the value or select the setup.
This TV set has three methods to set channels, which are respectively Automatic search, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. System Menu Color Sys.
Color System B C A Usually this should be set in the auto position. However if the color displayed on the screen are incorrect, you can manually select the correct color system. Press MENU and then VOL+/- button, till the picture menu shown on the right will display on the screen.
Picture Quality Adjust Picture Quality Adjust Picture Quality Adjust The TV menu gives you an overview of MENU you can select. Note: Depending on the input signal, one or more menu items may not be selectable. Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged.
Sound adjustment Sound Adjust 1. Press MENU button and then use VOL+/- button to select the SOU.menu. 2. Press CH+/- button for desired option. 3. After your option is selected, press VOL+/- button to adjust.
Adjustment Setup Adjustment Setup When VGA DVI input mode is set VGA/DVI: Display M ode Full S creen Adjust RGB Reset Auto Sync. Color Te mper Standard Black Stretch On B C A 1. Press MENU button on the remote controller and then use the VOL+/- to select the ADJ.
Function Setup Function Setup It is possible to select Menu Language, OSD translucent, position and screen display of MENU as follows: 1. Press MENU button once, and then use VOL+/- button until the f.
Parental 24 Plasma TV Close Caption (Note: Close Caption is only available in A V and S-V ideo signal) Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen.
Ratings for Movies previously shown in theaters: Movie Ratings : NR (Permits all programs) G (General audience) PG (Parental guidance suggested) PG-13 (Parents strongly cautioned) R (Restricted) NC-17 (No one 17 and under admitted) X (Adult only) If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
Time Setup If Off-time or On-time is intended in AV1/S-Video/YPbPr/YCbCr/VGA , follow the instructions as below: Clock --:-- Off T ime --:-- On T ime --:-- On Prog 000 Remind T ime --:-- Remind Prog.
Lock Setup Lock Set PassWord Tuning Lock Off Preset Prog. Of f Prog. Num 1 Source Lock Child Lock Of f Max V olume 100 UnLock Change Password The password can be changed. Press CH+/- button and select Password. Press VOL+/- or ENTER button, the screen will display Old Pw.
Source Lock Source Lock is opted to hinder external input modes, such as AV , S -V ideo and VGA. Press CH+/- button to select the option, and press VOL+/- button to display Source Lock menu. Source Lock A V 1 O f f S-Video Off YPbPr/YCbCr Off VGA Off DVI Off Press CH+/- button to select desired option.
- RGB (PC) mode only; This function doesn`t work for RGB-DTV mode. - Automatically adjusts picture position and minimizes image shaking. - After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
Check whether the TV is turned on from both front button and t he back switch. Is the power cord inserted into wall power outlet? T est the wall power outlet, plug another product`s power cord into the outlet where the TV`s power cord was plugged in. No picture & No sound Press the VOL+ button.
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV . Be sure to turn the power off and unplug the power cord before you begin any cleaning. 1 . Here`s a great way to keep the dust off your screen for a while.
Dimensen(WXHXD) Unit::inches/mm (main compoment) 41.3x3.4x26.1/1050x664x86 60.6/27.5 42EP24STV Speakers Impedance Input consumption 8 2x10W ~110/220 Volts , 50/60Hz Size(WxHxD) (inches/mm) Weight (pounds/kg) 4.3x21.9x2.4/1 10x556x62 2x5.5/2x2.5 The specifications shown above may be changed without notice for quality improvement.
V0.1 0090506987.
An important point after buying a device Haier 42EP24STV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Haier 42EP24STV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Haier 42EP24STV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Haier 42EP24STV you will learn all the available features of the product, as well as information on its operation. The information that you get Haier 42EP24STV will certainly help you make a decision on the purchase.
If you already are a holder of Haier 42EP24STV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Haier 42EP24STV.
However, one of the most important roles played by the user manual is to help in solving problems with Haier 42EP24STV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Haier 42EP24STV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
