Instruction/ maintenance manual of the product SIA CP-01 HAI
Go to page of 88
Owner's Manual Includes the SIA CP-01 Control Panel Standard Features for False Alarm Reduction Document Number 21R00-1 Rev. 2.13 September, 2006.
Document Number 21R00-1 Rev . 2.13 September, 2006 Copyright © 2000-2006 HAI All Rights Reserved www.homeauto.com.
i Contents INTRODUCTION........................................................................................................................................... 1 Underwriter's Laborato ries ( UL) Listing .......................................
ii CONTROL .................................................................................................................................................... 15 About UPB ..............................................................................
iii Status......................................................................................................................... ..................................................................... 33 Configuring HLC Devices ......................
iv Alarm Even t Butto ns............................................................................................................ ..................................................... 54 X-10 Event Bu ttons..........................................
v UNDERWRITER'S LABORATO RIES REQUIREMENTS ................................................................... 71 FEDERAL COMMUNICATION CO MMISSION NOTICE: ................................................................. 72 CANADIAN INDUSTRY CANADA NOTICE .
.
1 INTRODUCTION Thank you f or purchasing y our new Om niLT automation sy stem. You are a bout to experience a new feeling o f comfort, conven ience, an d control. Please take a few moments to become familiar with all of the feat ures of this fine product by revie wing this m anual.
2 OVERALL DESCRIPTION Console Operation The console is designed with everyt hing that is necessary for y ou to program and operate your OmniLT control and security system. Because we feel that it is very important for y ou to feel comforta ble with the operation of your Om niLT, we recommend that you start by becoming fami liar with your co nsole.
3 6- UP ARROW The Up Arrow ke y is used to scroll th rough menus and lists. The U p Arrow is used to scroll back thro ugh a list (for example, i f you have already used the down arrow to scroll to an item, the Up Arrow will bring you back to a previous item).
4 When using the arr ow keys to scroll through lists of units, zon e s, buttons, codes, and temperatur e zones, only the named items are displayed. If no text description h as been given to an item, it will be skipped ov er when scrolling throu gh that list.
5 Confirmation Beep When you have successfully co mpleted a function, such as en tering a program or changing a setup item, the conso le will beep once. Cancel If you are ever uns ure and wish to ret urn to the top-level di splay, press the ' * ' key.
6 SECURITY SYSTEM OPERA TION Disarming the Security System and Silencing Alarms Before going any f urther, you should know how to disarm yo ur security syste m in the event that th e alarm sounds. Turning the system OFF disarms the burglar alarm , resets emerge ncy al arms, and silences all sirens and sounders.
7 2 = NIGHT The NIGHT mode is used wh en you are asleep and ever yone in your househo ld is at home. In the Nigh t mode, your doors, windows, and non-sleep ing area (i.e. downstai rs) motion detectors are ar med. In the Night m ode, there is no entry delay.
8 What Happens When You Arm the Security System To arm the system into one of the 6 secu rity modes, from the s ecurity menu, choose the security m ode and press the approp riate key (1 - 6), and then enter your user code number on the con sole keypad or use one of the Shortcut Keys as de scribed.
9 Bypassing Zones 8 = BYPASS You can Bypass a zone t hat you do not want protect ed while the syst em is armed. Bypassing is al so the only way that a tamper o r panic zone can be disarm ed. For example, if there is a liquor cl oset or gun case on a tam per zone, then you must bypass that z one to gain access to it.
10 What To Do When You Come Home If you enter your home while the system is ar med in the Day, Night Delay, Away, or Vacation mode using an entry door : • The console beeper com es on and beeps 4 times per second.
11 Fire Alarm Activated When the fire alarm is activated by the smoke/ fire detector(s), the al arm responds exactly as described under B urglar Alarm Activated, except: • The console display reads, "FIRE ALARM ! ZONE NAME TRIPPED".
12 Police Emergency When the 1 key and the 3 key is pressed si multaneously , the Po lice Emergency alarm is activated . This alarm operates exactly the same as describe d for Burglar Alarm Activated e xcept: • The console di splay indicates: "BURGLARY! - P OLICE EMERG TRIPPED".
13 Trouble Indications The OmniLT constantly monitors the alarm zon es and several inte rnal matters and will alert you if it detects trouble. The particular tro uble is indicated on t he bottom line of the di splay and a trouble sig nal is given by beepi ng the console beeper continuously , 2 beeps per second.
14 Manager Code The Manager codes can arm /disarm the security system during a ssi gned times. The Manager code can access functi ons that are code protected in High Sec urity m ode. Mana gers may also access the syst em from an out side telephone line.
15 CONTROL The control features of the OmniLT make it easy and convenient to control almost any light or appliance from the console or ove r the telephone.
16 When set to UPB, the OmniLT controller can: ¾ Send comm ands (on, off, bright, dim and level) t o individual switches an d modules ¾ Receive commands and status from individual switches and m odu.
17 When “Status Tracking” is enabled (this is the default setting), OmniLT keeps track of the exact status of each unit even when a lighting scene is initiated b y the Room Controller. Room Controllers also keep track of when individual switches in a room are turned on and off.
18 When set to RadioR A, th e OmniLT controller can: ¾ Send comma nds (on, off, a nd level) to in dividual Swit ches and Dim mers ¾ Receive status (on an d off) from individual Switches and Dimmers .
19 Scrolling Through Names The OmniLT s tores names for Units, Zones, B uttons, Codes, Tem peratures, and M essages so that y ou don't have t o remem ber that "UNIT 5" is the "DEN LIGHT" and "ZONE 1" is the "FRONT DOOR".
20 Each lighting scene can also be set or easil y changed using t he pushbuttons on t he HAI UPB™ 6-B utton Room Contr oller, as follows: Step Operation 1 Press the desired pushbutton on the HAI UPB™ 6-Button Room Controller to activate the cu rrent scene (preset lighting level) in each of the HLC devi ces.
21 ¾ 5 (RMP) does not affect CentraLite units. ¾ Press 9 (TIM) t o time the selected unit (On or Off). Timed com mands may be from 1-99 seconds, 1-99 m inutes or 1-18 hours.
22 Ramp Command (ALC) When ALC Switch Modules are b eing used, it is po ssible to ramp the lighting lev el of an ALC Dimmer Switch to a new level at a selectable ramp rate. Only ALC Dimmer Switches respond to the Ramp command. Press the 5 (RAMP) key to select the ramp command.
23 Timed Commands The timed comm ands allow a units t o be turned on or off for a speci fied period of t ime. The unit may be turned On for 1-99 (minutes or seconds), or 1 -18 hours, t hen Off; or t urned Off fo r 1-99 (mi nutes or seconds ) or 1-18 ho urs, then On.
24 Controlling Outputs The OmniLT has 2 (ex pandable to 10) outputs that can be u sed to switch rel ays. Outputs 1 and 2 are c ontrolled by unit numbers 27 and 28. These are har dwired outputs t hat are connected direct ly through the Om niLT and not thro ugh a module.
25 Leviton Scene Control OmniLT supports Leviton Scen e Control (a feature found in certain Leviton Switches. There are 16 Scen es that can be set and executed. The Leviton Switc hes are divided into "lighting groups" of f our units each. Each of thes e lighting groups can be se t to four different Scenes.
26 Scene Off Command Once the Scenes ha ve been sent, pres s the 0 (OFF) key to command the four units in that Scen e to turn off. Notes: 1. When sendi ng Scene Comm ands, the cont roller m ust be configured to all ow Extended Code transm issions.
27 Executing Phantom Buttons OmniLT can turn on and turn off each of the 17 possible Phantom Butt ons. Phantom Buttons must be pre-programmed into the RS-232 interf ace or Chronos.
28 Dinner for Two (Button 3): - dim the di ning and livi ng room lights - turn on th e porch light - turn off all the bedroom lights - dim the den l ight - turn on the stereo To activate a p reprogrammed but ton, from t he top-level di splay or from the main m enu, press the 3 (B TTN) key on t he console keypad.
29 After the ' # ' key is pressed, a menu approp riate for the type of temperature zone is shown. For Celsius tem peratures, press the ' # ' key prior to enterin g the temperature to make the num ber negative. The Cel sius temperature m ay also be specified in 0.
30 For a heat/cool thermostat, the status show s the current temperature, the heating a nd cooling tem perature setpoints , whether ho ld mode is on, t he system mode, and the fa n On/Auto sel ection.
31 To set up your thermostat for use with the energy sav er, set it in the appropriate mode and set the temperature to you r prefere nce. NOTE: Your heating and coo ling system will always be off if you set your thermostat to Off mode. The PESM cannot turn it back on.
32 IMPORTANT NOTES: ¾ There is a 3-m inute minim um on and off tim e for PESMs designe d to prevent sh ort cycling yo ur HVAC compresso r. If the PESM has just turned the HVAC system on or off, it will wait 3 minutes before changing it, even though the display does change.
33 Temperature Control of Appliances You can control app liances connected to X-10 an d ALC modules (such as a ceiling fan) using the Button feature of the OmniLT.
34 You may enter a unit nu mber to start displaying the statu s of that unit, or simply press th e down arrow key to scro ll through t he list of units. The status display is as s hown under Control, except that n ow the arro w keys may be used to continu e scrolling between units.
35 Configuring HLC Devices usin g an OmniTouch T ouchscreen To configure HLC devices from an Om niTouch touc hscreen, press the “C ontrol” icon on t he Home page.
36 3 = SUN (SUNRISE / SUNSET AUTOMATIC CALCULAT ION) The system automatically calculates the tim e of sunrise and sunset each day. From the status menu, press the 3 (SUN) key on th e console keypad to.
37 5 = TEMP (TEMPERATURE) The Temperature Status menu allows you to view and scr oll through the statu s of each Thermostat, PESM, and Temperatu re Sensor.
38 For trouble restorations, the ev ent log will show the zone name or specific trouble cond ition and "TRBL RST": 11:57 AM 5/8 BATTERY TRBL RST The system records each re mote access. A remote phone access is when som eone calls into the system from an outsi de phone line.
39 Clear Message The 3 (CLEAR) key allows you to clear the selected text message, or all text m essages from the console's display. TRASH NIGHT ENTER MESSAGE 0=ALL ↓ You may enter the message number followed by the ' # ' key to clear that message, or simply press the down arrow key to scro ll through a list of messages.
40 Pro-Link also has the capabil ity to monitor the serial port for incoming text m essages. When a text message is received, Pro-L ink searches through all 16 messages for a m atching message. If on e is found, the Progra m Comma nd (macro) correspondin g to the matching m essage is activated.
41 TELEPHONE CONTROL Telephone Interface Your OmniLT is equipped with a built-in te lephone response feature that allows you to control and access the status of your system from any Touch-Tone phone. The OmniLT actuall y talks to you usin g a digital recordi ng of an actual hum an voice, so the sound i s incredibly life l ike.
42 Phone Access Denied - Remote Lockout The OmniLT has a rem ote lockout feature to discourage youngsters (and a dults who act that way) from trying to access your system. If four invalid codes are entered, the syste m will hang up and a one-hou r lockout period will be gin.
43 When you are finished with th e voice menu, press the 9 (G ood-Bye) key. The OmniLT will say, "GOOD-BYE" and hang up. From an in-house phone, the d ial tone will return. Fro m a re mote phone, you will hear a click as the OmniLT hangs up.
44 Emergency Dial-Out Emergency dia l out consists of two distinct p arts: the "digital dialer" and the "voice di aler". Digital Dialer The digital dialer (also called a "d igital communicator") rep orts al arm events to a centr al station monitoring center.
45 What You Hear - I f Your OmniLT Calls You When you pick up the pho ne and say something, th e OmniLT will say: (One of the followin g, depending on type of alarm) - BURGLAR ALARM - FIRE ALARM - AUX.
46 SETUP The Setup menu i s used to config ure operating param eters, program your system t o do its automated co ntrol and securit y functions, and give descripti ons (names) for all of your zones, units, buttons, codes , temperatures, and m essages.
47 You can specify the access (on/off) tim es for the code, this is, the time pe ri ods during which the code is valid. CODE X ON TIME: 8:00 AM MTWTF-- #=CHNG CODE X OFF TIME 5:00 PM MTWTF-- #=CHNG The times and days are changed by p ressing the ' # ' KEY.
48 Finally, you are prompted to enter the current d ate: ENTER DATE: MMDDYY Enter the cur rent date. If t he current dat e is February 8 , 2006, ente r it as “0 2 0 8 0 6”.
49 Selecting the 1 (C TRL) or 5 (TEMP) key will prom pt you to specify the desired unit or t emperature zone. T hese can be specified by entering the number, followed b y the ' # ' key or by using the arrow keys to scro ll through a list of items.
50 3 = Delete All Programs To delete All automation programs, from the Set Up Program menu, pr ess the 3 (DELETE) key. The disp lay will prompt you to confirm the deletion. DELETE ALL PROGRAMS? 0=NO 1=YES Select 1 (YES) to delete all auto mation control programs in the system.
51 You may al so choose to ha ve the program execute up to 120 minutes be fore or after t he time of s unrise or sunset. SUNSET 1=BEFORE 2=AFTER #=AT If the 1(BEFORE) or 2(AFTER) key is selected, you .
52 Control Unit / Switch Press Event Buttons This Event Button is activ ated upon the following: • When the specified Unit is turned on or off • When the top-rock er or bottom-rocker is pr essed o.
53 After the security mode is selected, an additiona l menu appears wh ich allows you to further specify the button. For example, y ou would like to activate a button when you arm the system into the 3 (AWAY) mode: WHEN AWAY: 1=DELAY 2=CODE Any of these may be selected alone or in combination.
54 If Leviton Sce ne is selected, you m ust first specify the scene num ber: ENTER SCENE: 1-64 Then s elect the s pecif ied comman d Off, On, or Set. If UPB Link is selected, y ou must first specify the link number: ENTER LINK: 1-250 Then s elect the s pecif ied comman d Off, On, or Set.
55 You are then prompted to ent er the X-10 unit code: X-10 UNIT CODE: 1-16 0=ALL Finally, you are prompted to specify the command that activates the event button: WHEN X-10 A1: 0=OFF 1=ON 2=SCENE After specify ing the X-10 House Code an d X-10 Unit Co de, select 0 for Off, 1 for On, or 2 for Sce ne.
56 Pro-Link determines that a message has bee n received when: • One or more characters have been r eceived followed by 100 ms of silence • One or more characters followed by a carriage return cha.
57 On the 6-But ton Keypad: LED 1 is behi nd the “On” but ton, LED 2 is behind the “Off” button , and LED 3-6 is behind the A-D buttons, respectively.
58 Program All On / All Off Commands Select the 4 (ALL) key t o program All Lights On and All Uni ts Off comma nds. It is also used to pr ogram Leviton Scenes , UPB Link, Radi oRA Phantom Button, or C entraLite Scene.
59 Program Control Conditions Press the 1 (CTRL) key to specify that the pro gram should only ex ecute if a specified control un it is either On or Off. The display prompts for the unit number: UNIT: ENTER UNIT ↓ Enter the unit number followed by the ' # ' key, or use the arrow k eys to select the unit.
60 Program Other Conditions Select the # (OTHER) key to select a condition from a list of other condition s. SELECT CONDITION: NONE ↓ Choose "NONE" when ed iting a program and choose not to cond itionalize the program.
61 Remot e Comma nds The Remote Commands Ok item allows you to pr event any commands from being issu ed from a remote telephone. If Remote Commands Ok is set to Yes, the OmniLT will allow all commands to be ex ecuted when called from a remote telephone.
62 Dial out number 1 has two times associated with it, an On a nd Off time. The OmniLT will only call this number if the time and days are betwe en the Dial Out 1 On and Dial Out 1 Of f times and dates. Press # to chang e the On and Off times - See Set Up Codes .
63 Exit Delay The Exit Delay is the time, in seconds, that you have to leave your house wh en you turn on the system. When arming the system in Day, Night, Away, or Vaca tion modes, the system will wait this amount of time before arm ing. EXIT DELAY: 60 45-180 SECONDS The default Exit Delay is 60 seconds.
64 Enable Auto Bypass Wit h Auto- Bypass set to “No”, all zones to be armed must be secure when the system is armed. Otherwise, the console will beep three times and display "ZONE NOT RDY". If the system is ar me d and a zone is open when the Exit Delay expires, the alarm will sound.
65 Flash For Alarm You may enter one un it number that will flash On and Off continuously when the alarm is activated. Th is should be an outsid e light to alert neighbors and police to yo ur property if the alarm is activated. The default Flash For Alar m is Unit 2.
66 Notes: 1. When configured, the House Code will affect 2 rooms of HLC lighting (i.e. HC 1 ALL OFF affects Room 1 and 2). 2. When the House Code is c onfigured as UPB, RadioR A, or Cent raLite, “ H.
67 Latitude, Longitude, and Time Z one The system automatically calculate s the ti me of sunrise and sunset eac h day. Sunrise/sunset can be specifie d as the time a scheduling c ommand is exec uted, as an ena b le/disable time, or as a darkness condition on a scheduling comman d or event button.
68 Daylight Savings OmniLT automatically calculates the day of daylight savi ngs time each year. It al so adjusts the "time of day" each time daylig ht savings tim e begins and ends. To enable the sy stem to properl y calculate dayli ght savings tim e, a start month, st art weekend, end m onth, and end wee kend is set-up at the fa ctory.
69 Set Up Names The system can be set up to display descriptive nam es such as "FRONT DOOR", "JOH N'S BEDROOM", or "PORC H LIGHT" for zones, units, buttons, codes, temperatures, and m essages.
70 Set Up Address The final setup item is accomplished over th e telephone. This is the address that th e system says when it dials out in an emergency. Yo ur voice will be recorded on com puter chips in the O mniLT controll er and saved to be pl ayed back in the emergency message when the syst em dials out for an alarm.
71 UNDER WRITER'S LABORA TO RIES REQUIREM ENTS For a complete list of requirements and restri ctions when installing the OmniL T panel in a UL Listed system, refer to the Under writer 's Laboratories Requirements section of the Installation Manual (21I00-1).
72 FEDERAL COMMUNICA TION COMMISSION NOTICE: 1. This equipment complies with Part 68 of FCC Rules. On the door , inside of the OmniLT enclosure, is a labe l that contains, amon g other information, the FCC registration number a nd Ringer Equivalence Number (REN) for this equipment.
73 CANADIAN INDUSTR Y CANADA NOTICE Notice: The Industry Canada label identifi es certified equipment. This certification means that the equipment meets certain telecommunications netw ork protective, oper ati onal and safety requirements. The Industr y Canada does not guarante e the equipme nt will operate to the user 's satisfaction.
74 APPENDIX A - SPECIFICA TIONS Size: Cont roller: 9.1W x 12. 1H x 3.5D Console: 4.6W x 4.5H x 1.2D Weight: Controlle r: approx. 4.5 lb. Console: approx. 0.5 lb . Operating 32 - 122 degrees F (0 - 50 degr ees C) Ranges: 10 - 9 5 % relati ve humidity , non-condensi ng Power: 120 VAC, 60 Hz, 60 watts Transforme r: 16.
75 APPENDIX B - CHARACTER CODES CODE CHAR CO DE CH AR CODE CHAR CODE CH AR 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 SPACE ! " # $ % & ' ( ) * + , - .
76 APPENDIX C - V OICE DESCRIPTIONS CODE DESCRIPTION CO DE DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 ELEVEN TWELV E THIRTEEN FOURTEEN FIFTEEN SIXTEEN SEVENTEEN EIGHTEEN NINETEEN TWO TWENTY THREE THIRTY FOUR FORTY FIVE FIFTY SIX SIXTY SEVEN SEVENTY EIGHT EIGHTY NINE NINETY A.
77 CODE DESCRIPTION CO DE DESCRIPTION 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 DRIVEWAY DURESS EAST EMERGENCY ENERGY E.
78 CODE DESCRIPTION CO DE DESCRIPTION 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 PUMP READY RECORD REMOTE REPEAT RESTOR.
.
NOTE TO INSTALLER Following installation, this manual sh all be left for the homeowner's use. HAI • New Orleans, LA • U S A.
An important point after buying a device HAI SIA CP-01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HAI SIA CP-01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HAI SIA CP-01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HAI SIA CP-01 you will learn all the available features of the product, as well as information on its operation. The information that you get HAI SIA CP-01 will certainly help you make a decision on the purchase.
If you already are a holder of HAI SIA CP-01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HAI SIA CP-01.
However, one of the most important roles played by the user manual is to help in solving problems with HAI SIA CP-01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HAI SIA CP-01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
