Instruction/ maintenance manual of the product 37A00-1 HAI
Go to page of 5
BLACK WHITE RED YELLOW LINE NEUTRAL LOAD CONTROL GREEN GROUND TOP (ON) BOTTOM (OFF) INDICATOR LED HAI UPB™ 15A Relay Switch and Auxiliary Switch Installation and Operating Instructions For the follo.
YELLOW BLUE GRAY CONTROL *NEUTRAL *NEUTRAL BLACK LINE BOTTOM (OFF) (ON) TOP (FOR RED INDICA TOR) (FOR BLUE INDICATO R) INDICATOR LED HAI Auxiliary Switch Overview The 37A00-1 HAI Auxiliary Switch (Figure 2) is an op tional co mpanion device u sed with the HAI UPB™ W all Switch for multi-way circuits.
Installation Procedure 1. Be sure that all power t o the load has been di sconnected by turning off the circui t breaker. 2. If applicable, remove the faceplate from the existing wall sw itch, remove the existin g wall switch from the wall box, and disconnect the wires from the existing wall switch.
HAI 15A RELAY SWITCH OPE RATION The HAI 15A Relay Switch has configurable items that can be se t using the UPB™ UPStart configuration software. The following describes the operatio n of the HAI 15A Rela y Sw itch in its factory default co nfiguration.
SPECIFICATIONS Model Number 40A00-1 Incandescent Loads, I nductive Loads, and Floresce nt Loads Yes Motor-Operated Appliances Yes Current Ma ximum 15A Connections 18 GA LED Indicator Yes Dimensi ons 4.
An important point after buying a device HAI 37A00-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought HAI 37A00-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data HAI 37A00-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, HAI 37A00-1 you will learn all the available features of the product, as well as information on its operation. The information that you get HAI 37A00-1 will certainly help you make a decision on the purchase.
If you already are a holder of HAI 37A00-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime HAI 37A00-1.
However, one of the most important roles played by the user manual is to help in solving problems with HAI 37A00-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device HAI 37A00-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
