Instruction/ maintenance manual of the product 004700-0 Guardian
Go to page of 52
Owner’ s Man ual and Installation Instructions Air -cooled Recreational V ehic le Generators Models: 004700-0 004708-0 QUIETP A CT 40G This manual should remain with the unit.
I NTRODUCTION Thank you for purchasing this model by Generac P ower Systems Inc. This model is designed and man- ufactured to supply electrical power for recreational vehicles.
T able of Contents Recreational V ehicle Generator 1 Part – Owner’s Manual Introduction ........................................ Inside Front Cover Read This Manual Thoroughly ................................. IFC Contents ........................
2 Study these SAFETY RULES carefully before install- ing, operating or servicing this equipment. Become familiar with this manual and with the unit. The gen- erator can operate safely , efficiently and reliably only if it is properly installed, operated and maintained.
3 When working on this equipment, remain alert • at all times. Never work on the equipment when physically or mentally fatigued. Inspect the generator regularly , and contact the • nearest Authorized Service Dealer immediately for parts needing repair or replacement.
4 1. Generator Air Intake 2. Engine Start/Stop Switch 3. F use 4. Optional Remote P anel Receptacle (Side V iew) 5. Generator AC Output Leads (Side V iew) 6. F uel Primer Switch 7. Circuit Breaker 8. Starter Contactor 9. F uel Inlet 10. F uel Pump (Behind Access P anel) 11.
5 Section 1 – General Information Recreational V ehicle Generator 1.2 GEN ER A T OR AP P LICAB I LIT Y These generators have been designed and manufac- tured for supplying electrical power for recreational vehicles. Do not modify the generator or use it for any application other than for what it was designed.
6 Section 1 – General Information Recreational V ehicle Generator The manufacturer does not r ecommend using any gasoline containing alcohol (such as “gaso- hol”). If using any gasoline containing alcohol, it must not contain more than 10 per cent ethanol, and it must be removed fr om the generator dur - ing storage.
7 Section 2 – Operation Recreational V ehicle Generator 2.1 GEN ER A T OR CONTROL P AN EL The following features are mounted on the generator control panel (Figure 2.1): Figure 2.1 – Generator Control Panel PRI ME FUEL STO P START 30A C. B . FUS E CONTROL CENTER 7.
8 Section 2 – Operation Recreational V ehicle Generator 2.4.2 ENGI NE L UB R ICA TION Have the engine crankcase properly serviced with the recommended oil before starting .
9 Section 2 – Operation Recreational V ehicle Generator 2.6 S T OP P I NG TH E GEN ER A T OR 1. T urn OFF all electrical loads using the means provided (such as a main circuit breaker or transfer switch). 2. Let generator run at no -load for a few minutes, to stabilize internal engine generator temperatures.
10 Section 2 – Operation Recreational V ehicle Generator 2.9.3 F IELD BOOST The Controller Circuit Board houses a field boost diode and resistor that are not part of the automatic choke circuit. These two components are part of a “field boost ” circuit (Figure 2.
11 Section 3 – Maintenance Recreational V ehicle Generator 3.1 CH E CKI NG TH E ENGI N E OI L LEVEL F or oil capacities and requirements, see “Engine Oil Requirements”. Check the engine crankcase oil level at least every eight hours of operation, or before each use.
12 Section 3 – Maintenance Recreational V ehicle Generator NOTE: Check the oil level and fill to the “FULL ” mark after checking for leaks. The filter will retain some oil.
Section 3 – Maintenance Recreational V ehicle Generator Figure 3.4 – Setting the Spark Plug Gap Sparking can occur if the wire terminal does not fit firmly on the spark plug terminal end. If nec- essary , re-form the wire terminal to obtain a tight fit.
14 3.9 B A T TER Y MAINTENANCE All lead-acid batteries will discharge when not in use. The generator battery should be inspected as follows: 3.9.1 WEEKL Y Inspect the battery posts and cables for tightness • and corrosion. Tighten and clean as necessary .
15 4. Attach a tag to the engine indicating the viscosity and classification of the oil in the crankcase. 5. Remove the spark plug and pour two or three tablespoons of clean, fresh engine oil into the spark plug threaded openings. Reinstall and tighten the spark plug .
16 Section 4 – Notes Recreational V ehicle Generator.
P ART I I – I NS T ALL A TION I NS TR UCTIONS D ANGER ONL Y QUALIFIED ELECTRICIANS OR CONTRACTORS SHOULD A TTEMPT INST ALLA TION!.
18 NO TICE T O I NST ALLER These Installation Instructions have been published by the manufacturer to aid in the installation of the products described in this manual. The manufac- turer assumes that installation personnel are familiar with the procedures for installing such products, or similar products manufactured.
19 ELE CTR ICAL HA Z AR DS The generator covered by this manual produces • dangerous electrical voltages and can cause fatal electrical shock. A void contact with bare wires, ter - minals, connections, etc., while the unit is running . Ensure all appropriate covers, guards and barriers are in place before operating the generator .
20 1.1 P U R POSE AN D S COPE OF TH E MAN U AL These Installation Instructions have been prepared especially for the purpose of familiarizing installers and owners of the applicable equipment with the product's installation requirements.
21 Figure 1.2 – Major Features and Dimensions (Drawing No. 0D8716-H) Section 1 – General Information Recreational V ehicle Generator.
22 2.1 L OCA TION AN D SU P PORT 2.1.1 GEN ERA T OR L OCA TION The most desirable location for the generator set is between the vehicle's main frame members. However , this is seldom possible. Most units must be installed on the side of the vehicle and are difficult to rein- force.
23 Figure 2.2 – T ypical Suspended Mounting System GENERA TOR SUPPORT FRAME (MODEL 004718-0) GENERA TOR MOUNTING HOLES FOR 5/16" - 18 BOL TS (6 PLACES) 2.1.4 GEN ERA T OR R ES TRAI NT Use four 5/16"-18 hardened steel bolts (Grade 5) to fasten the generator to the supporting frame or the support tubing .
24 If constructing a compartment, line the exterior • (underside) of the compartment floor with 26- gauge galvanized steel. All seams, splices and joints of the compartment • walls (unless vapor tight by design) should be caulked to prevent poisonous, flammable or explo - sive vapors from entering the vehicle interior .
25 Figure 2.7 – T ypical Noise Abatement Line the compartment interior walls and floor , as • well as the underside of the floor , with 26-gauge galvanized steel.
26 Section 2 – Installation Recreational V ehicle Generator Figure 2.8 – Compartment Floor Cutout (Drawing 0G3723-A).
27 2.3.2 TES TING TH E I NST ALL A TION The manufacturer recommends testing the installa- tion to be sure adequate cooling airflow is available to the unit before placing the unit into service. If the unit shows signs of overheating, enlarge the air openings.
28 2.4.2.2 Flexible Fuel Line Use an approved flexible length of fuel hose between the generator fuel inlet connection and rigid fuel lines. This prevents breaking of the line caused by vibration, shifting, settling or movement. The follow- ing rules apply: The flexible hose must comply with SAE J30R7, • “Standard for F uel and Oil Hose.
29 2.5.2 EXHAUST S Y STEM S AFETY Maintain a clearance of at least 3 inches (76 mm) • between exhaust system parts and any combus- tible material (such as wood, felt, cotton, organic fibers or other like material).
30 Figure 2.13 – Generator AC Output Leads 483.1 AC OUTPUT HARNESS REMOTE P ANEL CONNECTOR BA TTERY CONNECTIONS FUEL FIL TER I t r e , e h i t w a n c .
31 2.6.7 GROU ND F AU L T CI RCUIT I NTERR U PTERS The National Electrical Code (NFP A 70, 551-7) requires that ground fault circuit interrupters (GFCIs) be installed on all external and some internal electri- cal receptacles. Contact the dealer for recommenda- tions.
32 2.7 .3 B A T TER Y CABLE CONN ECTIONS 1. Connect the battery cable from the battery post or terminal indicated by a POSITIVE, POS or (+) to the lug on the starter contactor (Figure 2.16). NOTE: Check to be sure the battery cable boot for the starter cable has been installed.
33 Section 3 – Post-Installation Start-up Adjustments Recreational V ehicle Generator 3.1 POS T I NST ALLA TION T ESTS The air - cooled generator set was factory tested and adjusted. It should not be required to adjust the unit any further except under special circumstances.
34 Section 3 – Post-Installation Start-up Adjustments Recreational V ehicle Generator 3.5 I NS T ALL A TION CH ECKLIS T L OCA TION AN D SU P PORT ❑ Generator is properly located. ❑ Generator is properly supported. ❑ Generator is properly restrained.
35 Section 4 – T roubleshooting Recreational V ehicle Generator TROU B LE SHOO TI NG GU I DE Problem Cause Correction The engine will not crank. 1. F use blown 1. Replace fuse. 2. Loose, corroded or defective 2. Tighten, clean or replace battery cables as necessary .
RED BLUE ORANGE BROWN 7 7 YELLOW WHITE 15 BA TTERY CHARGE WINDING NEUTRAL CONNECTION GREEN BY CU S TOMER WHITE T2 FIELD 120V 30A 44 0F 0N 0K 22P DPE WINDING 2 CB3 6 ELECTRONIC REGULA TOR VOLT AGE 2A 0.
37 Section 5 — Electrical Data Recreational V ehicle Generator Electrical Schematic and Wiring Diagram – Drawing No. 0D8063-D 0 CONN. 2 PIN# 0 90 14 14 CH 18A 90 85 LOP C S 0 18 RED 18 85 17 18A 85 PCB J1-7 J1-9 J1-12 J1-11 J1-10 J1-8 J1-15 J1-14 J1-13 J1-2 J1-5 J1-4 J1-3 J1-1 J2 J1-6 J3 18 1 F S 14 2 3 18 18A 18 CONN.
38 Section 6 — Exploded Views and P ar ts Lists Recreational V ehicle Generator Enclosure – Drawing No. 0D835 2-M.
39 ITEM P ART NO . QTY . DESCRIPTION 1 0D6822 1 TRA Y , ENCLO S URE 2 0D6942 1 P ANEL, ENCLO S URE S IDE 3 0D6939 1 P ANEL, REAR DIVIDER 4 0D6943 1 P ANEL, ENCLO S URE ROOF 5 0D6941 1 P ANEL, ENCLO S .
40 Section 6 — Exploded Views and P arts Lists Recreational V ehicle Generator Generator – Drawing No. 0D835 3-M.
41 Section 6 — Exploded Views and P arts Lists Recreational V ehicle Generator Generator – Drawing No. 0D835 3-M ITEM P ART NO . QTY . DESCRIPTION 1 029092 1 S CREW IHHC 5/16”-24 X 11-1/4” G5 2 022129 22 W A S HER LOCK M8-5/16” 3 049451 1 W A S HER FLA T .
42 Section 6 — Exploded Views and P arts Lists Recreational V ehicle Generator Control Panel – Drawing No. 0D83 54-H.
43 Section 6 — Exploded Views and P arts Lists Recreational V ehicle Generator Control Panel – Drawing No. 0D83 54-H ITEM P ART NO . QTY . DESCRIPTION 1 0F9719 1 REGULA TOR V OL T AGE 2 075210A 1 TERMINAL BLOCK 3 092234 1 CONTROLLER P .
44 Section 6 — Exploded Views and P arts Lists Recreational V ehicle Generator GN-22 0 H/SH Engine – Drawing No. 0D8355-AD P art 1.
45 Section 6 — Exploded Views and P arts Lists Recreational V ehicle Generator GN-22 0 H/SH Engine – Drawing No. 0D8355-AD P art 1 ITEM P ART NO . QTY .
46 Section 6 — Exploded Views and P arts Lists Recreational V ehicle Generator GN-22 0 H/SH Engine – Drawing No. 0D8355-AD P art 2.
47 Section 6 — Exploded Views and P arts Lists Recreational V ehicle Generator GN-22 0 H/SH Engine – Drawing No. 0D8355-AD P art 2 ITEM P ART NO . QTY .
48 CALI FOR N IA AND F EDER AL EM ISSION C ONTROL W AR R ANT Y ST A TEM ENT Y OU R W ARR ANT Y RIGHTS AN D OBLIGA TIONS The California Air Resources Board (CARB) and the United States Environmental Protection Agency (EP A), together with Generac P ower Systems, Inc.
49 EM IS SION CONTROL S Y STEM W AR R ANTY Emission Control System W arranty (ECS W arranty) for 1997 and later model year engines: (a) Applicability: This warranty shall apply to 1997 and later model year engines.
Part No. 0D8351A Revision A (08/15/08) Printed in U.S.A. Section 7 – W arranty Recreational V ehicle Generator GENERA C PO WER SYSTEMS’ THREE-YEAR LIMITED W ARRANTY FOR GU ARDIAN RECREA TIONAL VEHICLE GENERA T ORS NO TE: ALL UNITS MUST BE INST ALLED BY GENERAC PO WER SYSTEMS AUTHORIZED SER VICE F ACILITIES.
An important point after buying a device Guardian 004700-0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Guardian 004700-0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Guardian 004700-0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Guardian 004700-0 you will learn all the available features of the product, as well as information on its operation. The information that you get Guardian 004700-0 will certainly help you make a decision on the purchase.
If you already are a holder of Guardian 004700-0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Guardian 004700-0.
However, one of the most important roles played by the user manual is to help in solving problems with Guardian 004700-0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Guardian 004700-0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
