Instruction/ maintenance manual of the product PART NO.70999 REV.G (03-12) GSW
Go to page of 13
FOR Y OUR SAFETY • Do not stor e or use g asoline or other f lammab le va pour s and liquids in the vicinity of this or an y other a ppliance. • Installa tion and ser vice m ust be perf or med b y a qualif ied installer , ser vice a g enc y or the g as supplier .
1” 1” ALCOVE INST ALLA TION LOCA TION Generally , the location selected should be as close to the wall as practical and as centralized with the piping system as possible.
– 2 – 1. COLD W A TER INLET 2. HOT W A TER OUTLET 3. GAS SUPPL Y MANUAL SHUT -OFF V AL VE 4. SEDIMENT TRAP 5. UNION - GROUND JOINT TYPE 6. FLOOR DRAIN 7. TEMPERA TURE & PRESSURE RELIEF V AL VE 8. GAS CONTROL 9. W A TER SUPPL Y T O METER 10. W A TER SUPPL Y T O HOME 1 1.
– 3 – Figure 3 - V ent Location Limit ations For a second or more direct vent unit, the dist ance between vent terminals must have a minimum of 1 foot. INSPECT SHIPMENT –– There may be hidden damage caused by transit. Check to be cert ain all p art s of the venting system, as shown in Figures 3A through 3M, are present.
SLOPE Figure 3 J Check the vent pipe’ s level or slope again, and adjust if required. – 4 – Figure 3 F Bend the 3 1/8” and 6” corrugated pipe all together toward the water heater ’ s flue connection.
– 5 – Inlet gas pressure to the appliance must not exceed the gas pressures marked on the rating plate; 7” W .C. for natural gas, 14” W .C. for L.P . gas. The minimum supply pressure for the purpose of input adjustment is 1” above manifold pressure.
– 6 – W ARNING Do not attempt to operate this water heater with the cold water inlet valve closed. Manually operate the T emperature and Pressure Relief valve at least once a year .
VI) LIGHTING AFTER INST ALLA TION W ARNING: T O A VOID POSSIBLE INJURY , FIRE AND EXPLOSION,READ THESE PRECAUTIONS BEFORE A TTEMPTING T O LIGHT OR RE- LIGHT THE PILOT . CHECK THA T THE HEA TER IS FILLED WITH W A TER AND THE VENTING SYSTEM IS UNOBSTRUCTED.
– 8 – LIGHTING INSTR UCTIONS FOR HEA TER WITH “R OBER TSHA W 220R” GAS CONTR OLS W ARNING: Should overheating occur or the gas supply fail to shut of f, turn of f the manual gas valve to the appliance. 1. ST OP! Read all safety labels on the water heater before operation.
– 9 – W ARNING If the water heater needs to be relit; 1. Open the inner door for at least 10 minutes and force some fresh air into the combustion chamber to clear any gas from the water heater and vent system. 2 Check the vent terminal for blockage.
– 10 – MAINTENANCE INSTRUCTIONS - GENERAL HOUSEKEEPING As a precaution against fire, and to maint ain an adequate flow of combustion air to the heater: • keep the appliance area clear and free f.
– 1 1 – CONTROL If the heater or the controls have been subjected to flooding, shut of f the gas at the manual shut-of f valve to the heater and call your gas comp any . The heater operates under a fully automatic control. Once the desired water temperature has been selected, the gas control will maint ain that temperature within close limit s.
See Rating Label Serial Number prefix for W arranty Code. Reduced warranty period applies to Newfoundland. W arranty Code: P R S T U V W Y S tandard W arranty Y ears: 3 5 6 7 8 9 10 12 Reduced W arran.
An important point after buying a device GSW PART NO.70999 REV.G (03-12) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GSW PART NO.70999 REV.G (03-12) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GSW PART NO.70999 REV.G (03-12) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GSW PART NO.70999 REV.G (03-12) you will learn all the available features of the product, as well as information on its operation. The information that you get GSW PART NO.70999 REV.G (03-12) will certainly help you make a decision on the purchase.
If you already are a holder of GSW PART NO.70999 REV.G (03-12), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GSW PART NO.70999 REV.G (03-12).
However, one of the most important roles played by the user manual is to help in solving problems with GSW PART NO.70999 REV.G (03-12). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GSW PART NO.70999 REV.G (03-12) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
