Instruction/ maintenance manual of the product FlowThru GSW
Go to page of 8
ST ORA GE T ANKS FOR INST ANT ANEOUS WA TER HEA TERS INST ALLA TION AND OPERA TING INSTRUCTIONS F or FlowT hr u ® Br ands R ead and under stand these instr uctions thoroughl y before star ting T ABLE OF CONTENTS I) Introduction . . . . . . . . . . . .
INST ALLA TION RECORD Record key data here for future reference and prompt service: Installed By / Purchased From Location of Electrical Switch or Circuit Protector Installation Date Serial Number Model Number Circulator Pump T ype Boiler/W ater Heater BTU Input V olts P .
- 3 - Thank you for purchasing this FlowThru ® storage tank . Properly installed and maint ained, it will provide years of trouble free service. The warranty on this storage tank is in ef fect only when the tank is inst alled and operated in accordance with these instructions.
- 4 - Sizing T he Hot Wa ter System T emperature of the system is controlled by the temperature set point of the instant aneous water heater or boiler coil.
- 5 - 5. Pay attention to the desired flow direction when installing the circulator pump. If the pump does not have a check valve embedded install one to ensure the desired flow direction is maintained during system oper- ation. 6. Install a mixing valve with the hot port going to the top tank fitting.
- 6 - T emper ature Adjustment Thermostat s are factory set at 140°F (60°C). The thermo- stat operates automatically . It can be adjusted to provide a higher or lower water temperature. If water temperature adjustment is required: 1. T urn the electrical supply "OFF".
1. T urn "OFF" the electrical supply to the tank. 2. Close the cold water supply valve. 3. Open a nearby hot water faucet served by the system. 4. Connect a hose to the drain valve and route it to an adequate drain. 5. Open the drain valve and allow all the water to drain from the tank.
See Rating Label Serial Number prefix for W arranty Code. Reduced warranty period applies to Newfoundland. W arranty Code: P R S T U V W Y S tandard W arranty Y ears: 3 5 6 7 8 9 10 12 Reduced W arran.
An important point after buying a device GSW FlowThru (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GSW FlowThru yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GSW FlowThru - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GSW FlowThru you will learn all the available features of the product, as well as information on its operation. The information that you get GSW FlowThru will certainly help you make a decision on the purchase.
If you already are a holder of GSW FlowThru, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GSW FlowThru.
However, one of the most important roles played by the user manual is to help in solving problems with GSW FlowThru. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GSW FlowThru along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
