Instruction/ maintenance manual of the product SC 5304 DCF Grundig
Go to page of 16
ǵ CLOCK RADIO Sonoclock 54 SC 5304 DCF 01 SC 5304 DCF, D 05.04.2004 14:34 Uhr Seite 1.
ENGLISH 17 SAFETY , INFORMA TION _____________________ ENGLISH ° C 2h ° C MEMORY NAP WEC AL 2 AL 1 PROJECTOR ON/OFF 1/6 2/7 3/8 4/9 5/10 SLEEP MEMORY NAP WEC AL 2 AL 1 PROJECTOR ON/OFF 1/6 2/7 3/8 4.
18 OVER VIEW ____________________________________________ Controls on the top SNOOZE Interrupts the alarm function for approximately 9 minutes. The circular LED flashes when » SNOOZE « or » NAP « are pressed. Controls on the fr ont Z Sensor (Auto Dimmer).
ENGLISH 19 SA For setting the radio stations manually . For changing the selected settings such as time, date, alarm type, alarm time and alarm days. ON/OFF Switches the device off (stand-by) and back on. Interrupts the alarm stand-by (alarm time 1 and 2) for 24 hours.
20 The displays g Lights up when the device is in stand-by mode. • Operation indicator . Lights up when the device is switched on. g Displays the DCF time synchronisation. M 9 Displays the station position of the station you are currently playing. NAP The reminder timer is activated.
ENGLISH 21 Connect power cable Note: Check that the mains voltage on the type plate (on the bottom of the device) corresponds to your local mains supply . If this is not the case, contact your specialist dealer . 1 Plug the mains cable into the socket (230 V~, 50/60 Hz).
22 Additional information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply . The range of multi-system receivers is built to work in most European coun- tries. However , the mains plug and socket system for the UK dif fers from many European countries.
ENGLISH 23 SETTINGS ______________________________________________ Automatic settings Automatic station search Note: In order to interrupt the automatic settings, press » ON/OFF «. 1 Once you have connected your device to the mains, the run-through of the frequency appears on the display .
24 Manual settings If the device was not able to carr y out a station search and synchronisation due to bad reception, then you can manually set the radio stations, time and date. Y ou should nonetheless tr y to improve the reception conditions by aligning the FM and DCF antenna.
ENGLISH 25 8 Press » s «. – Display: The month flashes. 9 Press » S « or » A « briefly to set the day step-by-step or hold down to run through the days quickly . 10 Press » s «. – Display: The year flashes. 11 Press » S « or » A « briefly to set the year step-by-step or hold down to run through the years quickly .
26 All settings can be carried out in stand-by mode. The following sections describe the settings for the first alarm programme » ALARM «. Repeat this for the second alarm programme » ALARM «. When both alarm times are activated, » ALARM ɷ « , the alarm time (e.
ENGLISH 27 Signal alarm 1 Press » ON/OFF « to switch the device to stand-by mode. 2 T o activate the first alarm programme, press and hold down » AL 1 «. – Display: e.g. » ALARM ɷ « , the alarm time (e.g. » 6:00 «) and the next alarm day . 3 Press » AL 1 « twice to set the programme.
28 OPERA TION __________________________________________ Switching on and off 1 Press » ON/OFF « to switch the device on from stand-by mode and to switch it back to stand-by mode. Radio mode For the best possible FM (VHF) reception, it is sufficient to direct the wire antenna accordingly .
7 T o delete fur ther days of the week repeat steps 4 to 6 . 8 Press » AL 1 « to confirm your entr y . 9 T o reinser t deleted days of the week repeat steps 1 to 8 .
30 OPERA TION __________________________________________ Deactivate alarm for the next day . Y ou can deactivate the alarm function for the next day , for example, if that day is a public holiday . The set alarm times are saved. 1 T o deactivate the alarm function for the next day , press » SNOOZE « for more than 5 seconds.
Switching off the sleep timer 1 For switching off the sleep timer before the set time, switch of f device with » ON/OFF « or press and hold down » SLEEP «. – Display: » љ « and the remaining time stop glowing. – The device switches off. Setting the reminder timer 1 Activate the function with » NAP «.
An important point after buying a device Grundig SC 5304 DCF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grundig SC 5304 DCF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grundig SC 5304 DCF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grundig SC 5304 DCF you will learn all the available features of the product, as well as information on its operation. The information that you get Grundig SC 5304 DCF will certainly help you make a decision on the purchase.
If you already are a holder of Grundig SC 5304 DCF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grundig SC 5304 DCF.
However, one of the most important roles played by the user manual is to help in solving problems with Grundig SC 5304 DCF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grundig SC 5304 DCF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
