Instruction/ maintenance manual of the product AD-4545 American Dryer Corp.
Go to page of 10
AD-4545 Ser vice Manual American Dryer Corporation 88 Currant Road Fall River , MA 02720-4781 T elephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 E-mail: techsupport@amdry .
2 American Dryer Corporation 450331 - 1 R etain T his Manual in a Saf e Place for Future Ref er ence This product embodies advanced concepts in engineering, design, and safety . If this product is properly maintained, it will provide many years of safe, ef ficient, and trouble free operation.
450331 - 1 www .amdry .com 3 T a ble of Contents ________ List of Acr onyms _____________________ DSI Direct S park Ignition OSHA Occupational Safety and Health Administration IMPORT ANT Y ou must dis.
4 American Dryer Corporation 450331 - 1 Par ts Locations and R emoval ________ NOTE: Disconnect power to the machine at all times before removing or installing any components! Computer Panel Assembly Remo val: Remove the four screws holding the computer panel to the dryer .
450331 - 1 www .amdry .com 5 Door Switch R emo val: Open the main door . Remove the two Phillips head screws attaching the door switch housing to the front p anel. Disconnect the two wires on the door switch. Remove the two Phillips head screws (and associated nut s and star washers) holding the door switch to the door switch housing.
6 American Dryer Corporation 450331 - 1 Idler Ar m Remo val: Loosen the two 9/16” bolts holding the idler arm to the machine. Remove the two belts. Remove those two 9/16” bolts the idler arm will now come away from the machine. T ake off the idler pulley by loosening the two setscrews on the idler pulley and pull it off the idler shaft.
450331 - 1 www .amdry .com 7 Sail Switch R emo val: Remove the back guard. As shown in picture remove the two hex head screws. The sail switch box assembly will now come apart in two pieces. Remove the screws/nuts associated with the sail switch and remove it from the bracket.
8 American Dryer Corporation 450331 - 1 R ota tion Sensor Remo v al: Remove the bottom nut on the rotation sensor . Lift the rotation sensor up and through the hole in the bearing box. Disconnect the rotation sensor two pin connector . Remove from the machine.
450331 - 1 www .amdry .com 9 1. Remove back guard. 2. Remove drive belt. 3. Disconnect wiring harness from motor . IMPORT ANT : If top pocket is being replaced, ductwork on the side of the motor mount must be removed. 4. Remove nuts and washers holding the motor mount to the rear of the dryer and pull motor mount away .
ADC Part No. 450331 1 - 09/12/08 - 0.
An important point after buying a device American Dryer Corp. AD-4545 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Dryer Corp. AD-4545 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Dryer Corp. AD-4545 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Dryer Corp. AD-4545 you will learn all the available features of the product, as well as information on its operation. The information that you get American Dryer Corp. AD-4545 will certainly help you make a decision on the purchase.
If you already are a holder of American Dryer Corp. AD-4545, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Dryer Corp. AD-4545.
However, one of the most important roles played by the user manual is to help in solving problems with American Dryer Corp. AD-4545. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Dryer Corp. AD-4545 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
