Instruction/ maintenance manual of the product H7859 Grizzly
Go to page of 12
COPYRIGHT © FEBRUARY 2006 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
.
-C - For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages.
Model H7859 Right Angle Drill -D - Safety Instructions for Hand Drills 8. USE THE RIGHT TOOL. Do not force tool or attachment to do a job for which it was not designed. 9. DO NOT USE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. 10. USE PROPER EXTENSION CORD for the tool.
-E - Safety Instructions for Dril ls 1. READ THROUGH THE ENTIRE MANUAL BEFORE STARTING DRILL. Drill presents serious injury hazards to untrained users. 2. ALWAYS USE ANSI APPROVED SAFETY GLASSES WHEN OPERATING DRILL. Everyday eye- glasses are NOT safety glasses.
Model H7859 Right Angle Drill -F - SE CTI ON 2 : INTRODU C TION If you have any comments regarding this manual, please write to us at the following address: Grizzly Industrial, Inc. C/O Technical Documentation P.O. Box 2069 Bellingham, WA 98227-2069 Most importantly, we stand behind our tools.
-G - Your drill left our warehouse carefully packed. If you discover the drill is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materi- als for possible inspection by the carrier or its agent.
Model H7859 Right Angle Drill -H - SE CTI ON 4 : OP ER A TION S Changing Bits 1. DISCONNECT THE DRILL FROM POWER! 2. Insert the chuck key into one of the holes located on the side of the chuck. 3. Turn the chuck key counter-clock- wise. This will cause the three chuck jaws to open.
-I - Basic Maintenance Continuous use of a worn or damaged bit will overload the motor, so often inspect and sharpen drill bits as required. Regularly clean your drill and make sure that no dust or grime builds up in the motor ventilation holes. If these holes become blocked, the motor will wear down faster than necessary.
Model H7859 Right Angle Drill -J - Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
WARRANTY CARD Name _________________________________________________________________ Street _________________________________________________________________ City _______________________ State _______.
FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street______________________________.
An important point after buying a device Grizzly H7859 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly H7859 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly H7859 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly H7859 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly H7859 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly H7859, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly H7859.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly H7859. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly H7859 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center